ReviewsSpiral Pipe Mill

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

VEVOR Electric Drain Auger Cleaner, 26 ft x 1/3 in Cable Sewer Snake Machine with Gloves, Portable Plumbing Tool for Unclogging 0.8 to 2.6 inch Pipes at Sinks/Tubs/Toilets/Kitchen, 700W Red

  • Powerful Motor: The 700W portable machine is equipped with a powerful motor that turns the spiral clockwise and counter-clockwise at 800 RPM..
  • Three-stage Switch: The three-stage switch of the drain cleaning machine turns the spiral in the desired direction or stops the rotation..
  • Spiral Adapter: Spiral adapters in the pipe cleaning machine are suitable for winding outlets and for small diameter pipes..
  • Easy to Use: The drill heads of our electric drain cleaner can be easily coupled together with the cleaning spiral by means of the T-slot coupling..
  • Wide Application: The drain cleaner is suitable for both professional and domestic use. Perfect to use at sinks, tubs, toilets, kitchen, etc..
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Reflectix SPW0602508 6-Inch by 25-Feet Spiral Pipe Wrap

  • The product is manufactured in United states.
  • Simply wraps around your pipes or duct work overlapping approximately 1/2-Inch as you go.
  • Secure with refectix reflective foil tape (4280-3007) around each end of your wrapped product.
  • Provides an air space between the pipe and the wrap that will aid the insulation value.
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Dog Crates for Large Dogs with Thicken Plush Mat-Foldable Design + Adjustable The Tightness of The Cloth, Dog Crates 39.5inch

  • ... If you carefully look at the details of our dog crates for large dogs, you will find that we use double stitches to strengthen and reinforce the seam on cloth covers, especially at the bottom, which can prevent your dog from escaping. In any case, you can adjust the tightness of the cover by using the spiral pipe to make your portable dog crate more compact..
  • Our whole-pipe-support design will be more sturdy and safe, which will not collapse when the dog leaning over the pipe with feets. As long as the spiral tube is rotated down, the dog crates for large dogs can be completely folded flat, and the handle on the top is convenient for you to carry when you go out..
  • 3 mesh doors of dog crates for large dogs will be more ventilated, can provide your pets good view, reduce pet anxiety. What is more, you will no more worry about dog hairs flying everywhere..
  • Sizing of dog crates for large dogs perfect for most of cats and dogs-24inch fit for small dogs, like Bulldog, Dachshund,Papillon Dog.
  • 30inch fit for medium dogs, like Beagle, Poodle.
  • 39.5inch fit for Golden Retriever,Alask....
Check Stock

New Star Foodservice 37937 Commercial Grade Aluminum Non-Stick 24-Cup Muffin Pan

  • [INCLUDE] Kinds Stainless Steel Danish Tube Cone Croissant Mold Spiral Bread Pipe Baking Nonstick Cupcake Supplies Bakeware [M1 Round Tube,1 piece].
  • [USAGE] This product can be used to make Danish butter bread, spiral and screw bread, etc..
  • [PLEASE NOTE] In case of different physical photography and display equipment, if the color or color of the object is different, the physical object shall prevail. The size error is about 2cm because of artificial cropping..
Check Stock

Aurcs 4 Ft Artificial Boxwood Spiral Topiary Tree, Fake Plant Decor in Plastic Pot W/ Realistic Leaves & Twined Branches, Sturdy Steel Frame, Faux Potted Plants for Home, Office, Front Porch (1)

  • 【Robust & Reliable Material】 The vivid green leaves are made of high-quality PE and the twined branches are constructed of real solid wood. Thus, this spiral topiary tree is not only robust and uneasy to fade or deform, but also natural and free of bad smells and any other harmful elements..
  • 【Solid Base & Sturdy Structure】 The bottom plastic pot poured with cement inside gives strong support, ensuring the overall stability of the whole tree. Other than that, the steel pipe in the middle stands steadily, which is functional to keep the branches in the spiral shape. And the well-coated surface makes it rustproof..
  • 【Lifelike Spiral Topiary Tree】 This spiral topiary tree is covered with luxuriant and realistic leaves with silky touch, bringing endless vigor and a visual feast to you. Moreover, the spiral shape makes the artificial tree more charming and appealing. And the patterns on the pot also add a piece of elegance..
  • 【Low Maintenance Required】 Compared with real plants, this artificial spiral tree will be green forever and never wither. Additionally, real plants need enough sunlight and frequent watering, while our artificial tree will remain fresh and nice-looking without sunlight and water. All you need to do is just to wipe the dust ....
Check Stock

Yakamoz 10Pcs 1/8\ Shank Spiral Router Bit Flat End Carbide CNC End Mill Cutter 3 Flutes Milling Bits 2/3\ Cutting Length for MDF Acrylic Wood PVC

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
  • High quality carbide end mill provides good milling & cutting performance to ensure high work efficiency and to maximize worker efficiency..
  • High efficiency, durable, high precision and not easy to break. The design of flute, larger spiral chip space makes non-stick crumbs, smooth cutting and fast chip-removal..
  • Widely use for carving, cutting, engraving, milling, drilling, roughing, sculpturing in materials like MDF, acrylic, aluminum, wood, composite board, plastics, double color plate, ABS, PVC, organic board, solid wood, PVC expansion sheet etc..
  • Made of high quality tungsten steel for long service life, precision edge-grinding technology provide excellent cutting results and enhanced productivity..
Check Stock