Alfa Tools CSHTS70532 1/4-20 Carbon Steel Hand Tap Set Taper/Plug/Bottom
- Precision-made from high carbon tool steel.
- ideal for hand threading in routine maintenance, repair work and for Rethreading applications.
ReviewsSpiral Point Bottoming Tap
uxcell Thread Milling Tap Metric M1.8 x 0.35, Titanium Coated Cobalt HSS (High Speed Steel) 3 Straight Flutes Machine Micro Screw Threading Tap for Watches and Clocks, 2pcs
- SquareEnd Size : 5 x 5mm/ 0.2" x 0.2"(L*W).
- Package Content : 3 x Hand Tap1 x Plastic Storage Case.
CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8
- Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
- ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
- ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
- ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
- ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)
- High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
- Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
- 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
- Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
- Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
WOCACHI Womens Vintage Dresses Sleeveless Floral Party Prom Retro Swing Dress Mini Maxi Midi Swing Pleated Tank Print Off Shoulder Floral Solid Skirt Sequin Princess
- ...e and tops fashion women blouse and shirts blouses for women blouses for women fashion 2048 white blouses for women funny christmas christmas festival christmas food merry christmas eve christmas chords christmas spirit xmas day christmas's merry christmas day xmas christmas christmas santa claus december christmas.
- bottoming shirt bottoming shirt women autumn and winter bottoming shirt autumn and winter bottoming shirt women female bottoming shirt women's high collar bottoming shirt long sleeve bottoming shirt women's long sleeved sweater round neck loose bottoming t-shirt women's long sleeve bottoming shirt tight bottoming shirt pullover sweaters for women pullover hoodie women pullover women christmas blouse christmas blouses for women christmas blouses for women long sleeves merry christmas blouse.
- womens cardigan womens jumpers sweater for women sweaters for women womens black cardigan womens long cardigan womens cable knit jumper womens shawl cardigan womens wool jumpers sweatshirts for women womens zip up cardigan womens zip cardigan cashmere sweater women sweaters womens knitted jumpers sweater womens cardigan sweaters women's sweaters womens cable knit sweater womens wool sweaters womens cable knit cardigan womens black sweater womens knit swe....
Swordfish 8045 - Metric Alloy Steel Hand Threading Tap Set of 3 pcs Bottoming Plug Taper Uncoated Finish Square End M22x2.5
- Straight Flute Type, Round with Square End Shank, Uncoated (Bright) Finish.
- Each set includes 1 taper, bottoming and plug tap in the specified size.
Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric
- High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
- Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
- Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
- 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
- Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set
- 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
- HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
- Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
- CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)
- High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
- Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
- Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
- Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
- Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..
Irwin Tools Tap and Drill Sets, 13-Pieces
- This tap and drill bit set produces a thread that is strong and easy to tap.
- High-carbon steel plug taps are great for general-purpose threading.
- 135° split-point drill bits give fast, precise drilling.
- Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
- Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
- Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
- cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
- Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
- Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
- Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....