ReviewsSpiral Point Taps For Aluminum

uxcell M4 x 0.7 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs

Tap Size: M4 x 0.7 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life..
Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..

Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.

Check Stock

Driak 6pcs HSS Screw Countersink Drilling Bits M3-M10 Combination 1/4\ Hex Twist Tap Drill Dit Set

6PCS Hex Shank High Speed Steel Spiral Screw Thread Taps Drill Bits Set.
Suitable for soft tapping metal, aluminum, iron.
Complete hole drilling, tapping, deburring and countersinking in one operation with power.
Made from hardened high-speed steel vs carbon steel for longer life.

Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

This tap and drill bit set produces a thread that is strong and easy to tap.
High-carbon steel plug taps are great for general-purpose threading.
135° split-point drill bits give fast, precise drilling.
Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.

Check Stock

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

Wolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12

Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..

Check Stock

Wolfride 6PCS Tapping Drill Bit Set Metric Drill Tap Combination Bit Set M3 M4 M5 M6 M8 M10 Spiral Tap Drill Bit

High hardness, rustproof, solid and durable..
Drilling and tapping at the same time, save you time and effort..
Taps are designed with spiral flutes and the chip clearing process would be better..
There are total 12pcs of taps in 2 different standards that you can use for tapping various threads..
Their specifications are marked clearly on the surface, convenient to choose..

Check Stock

Machine Tap 5 PCS HSS Spiral Point Titanium Coated Tap Machine Screw Thread Metric Tap Set M3-M8 M3x 0.5 tap M4 x 0.7 tap M5 x 0.8 tap M6 x 1.0 tap M8 x 1.25 tap

✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..

Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

Check Stock