ReviewsSpiral Point Taps For Stainless Steel

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

[M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
[Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
[12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
[118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
[3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.

Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.

Check Stock

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

KitchenAid KP26M1XOB 6 Qt. Professional 600 Series Bowl-Lift Stand Mixer - Onyx Black

Over 10 colors available. Height : 17.0 inches , Voltage -120 volts.
Multipurpose attachment hub, over 15 optional attachments.
6-Qt. Stainless Steel Bowl with Comfortable Handle.
Includes burnished Powerknead spiral dough hook, burnished flat beater, wire whip, and 1 piece pouring shield, 1-year warranty.

Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 2 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M16 x 2. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

uxcell Metric Machine Thread Milling Tap M8 x 1.25 H2 Titanium Coated Ti-coated High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M8 x 1.25. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

uxcell Metric Machine Thread Milling Tap M12 x 1.75 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M12 x 1.75. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock