ReviewsSpiral Router Bit Sets

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

USA Worktools Spiral Upcut Router Bit 1/2-Inch Shank | Three Flute, Solid Carbide with 1/2-Inch Cutting Diameter and 2-Inch Cutting Length | Overall Length of 4 Inches | Made in USA (SCUS3-120B)

  • 3 flute spiral router bit with a 1/2″ cutting diameter, 1/2″ shank, 2” cutting length, and an overall length of 4”.
  • USA Worktools’ 1/2″ spiral upcut router bit is made from premium-quality solid carbide.
  • This upcut router bit clears chips in an upward ejection, providing a very clean bottom surface.
  • Can be used on CNC routers as well as hand-held and table-mounted portable routers.
  • All USA Worktools products are made in the USA where quality measurements consistently outperform work tools manufactured in other countries where there’s not the same appreciation of craftsmanship.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Tungsten Carbide Tapered End Mill 1/4\ Shank 3\ OVL with 4.0mm Tips Diameter (2.0mm Radius) 2.2Deg for Woodworking Carving CNC Router Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 4.0mm tip diameter, 2.2Deg, TiAIN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock