ReviewsSplit Ender Before And After

Split Ender Pro Rechargeable Tool Cordless Automatic Split End Clipper Remover Hair Trimmer for Dry Damaged and Brittle Split Ends for Men and Women - Black

  • 【Easy to Use】 Rid your hair of split ends faster and safer with the Split Ender..
  • 【For all types of hair】 Designed for frizzy, curly, straight, thick or thin hair as long as the hair is chin length or longer. Frizzy hair may....
  • 【Rechargeable Battery included】 Power Adaptor: Bi-Volt 110-240 Volts. Use plugged in or wireless. Charge the battery before use for 3 to 4 hours.....
  • 【New and Sealed】 Easy to open packaging. Product requires Fully Charged Battery in order to work as intended. From start to finish, place small....
  • 【Ideal Gift & One-Year Warranty】 This hair trimming device is the best gift for any family member or close friend. We provide a 1 Year Warranty so....
Check Stock

LANMU Micro SD to SD Card Extension Cable Adapter Flexible Extender Compatible with Ender 3 Pro/Ender 3/Ender 3 V2/Ender 5 Plus/Ender 5 Pro/CR-10S Pro/Anet A8 /Raspberry Pi (18.9in/48cm)

  • Premium Materials:Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.18.9in length design make it flexible and long enough to extend and read your SD cards..
  • Type: SD to Micro SD Card Extension Adapter.Support the card 32G,easily make your navigation upgraded,much more convenient for your life.LANMU SD Card Extension never affect the read and write speed of your machine,keeping it effficient and safe..
  • Universal Compatibility:Widely compatible with GPS, DVD, DVR, LED/LCD screen,mobile phones,Raspberry Pi and reality 3D printers,such as CR-10,Ender 3 Pro,Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more..
  • Caution - 1.When you change another TF card, please unplug the micro sd end from device at first, and then insert it into the printer slot again. Or please pay attention to restart the device once, if you do not want to remove the other end of the extension cord from the inside of the device.2.If the micro sd end is locked, it will make a "click" sound,please check it before printing..
  • Warranty:LANMU provides lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if receiving defective items,making sure the risk-free shopping experience for you..
Check Stock

Official Creality 3D Printer Ender 3 Nozzles 0.4mm 5PCS, 3D Printer Brass Hotend Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series and CR 10 Series

  • 【Quality Assurance】MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change..
  • 【Precise Design】3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle..
  • 【Applicability and Compatibility】MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
  • 【Package Include】Printer nozzles come with 5 pieces of MK8 nozzles in 0.4mm.
  • 【After Sales Service】We pay great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

  • 【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • 【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • 【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • 【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
  • 【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

LANMU Glass Bed Clips Clamps Compatible with Ender 3/3 Pro/3 V2/3S,Ender 5/Plus CR-10/10S Pro,CR-20 PRO Adjustable Stainless Steel 3D Printer Heated Bed Clips（Pack of 4）

  • Adjustable Glass Bed Clips: Ideal tight and stay clip for 3D printer bed, allow you to adjust the clip freely according to the thickness of the....
  • Upgrade 3D Pinter Platform Clips: Made of high quality stainless steel material, it is not easy to bend or break. It works better than original binder....
  • Easy to Use: Easy to install and remove, able to hold the glass and tightly in place but will not damage the bed, convenient to use.You can clamp them....
  • Wide Compatibility: These 3d printer bed clips can match with Creality Ender 3 pro, Ender 3,Eder 3S, Ender 3 V2,Ender 5, Ender 5 Pro,Ender 5....
  • Warranty: LANMU provides a lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if....
Check Stock

Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5

  • 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (.
  • 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website..
  • 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled..
  • 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process..
  • 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours..
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ...d level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram..
  • Wide Compatibility – The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..
Check Stock

Creality Ender 3 V2 3D Printer with Silent Mainboard Meanwell Power Supply Glass Bed and Resume Printing Ideal for Beginners Printing Size 220x220x250mm

  • 【Convenient printing】The upgraded ender 3 v2 3d printer can directly use the SD card to print and upgrade the firmware. These upgrades make....
  • 【Self-developed Silent Motherboard】 Creality Ender 3v2 with TMC2208 stepper drivers and 32 Bits Silent Mainboard of version 4.2.2 always ensures....
  • 【Tempered Glass Bed】The Glass Bed is an upgrade of Ender 3 and Ender 3 Pro. It has excellent adhesion and faster heating speed. When you using the....
  • 【Beginner Friendly】Creality Ender 3 V2 is an ideal FDM 3D Printers for DIY Home and School for Beginners, offers easier to understand operations,....
  • We are devoted to providing high-quality and economical 3D printers, excellent after-sales service to all customers. The 24-hour quick response and....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

CR Touch 2023 Upgrade Noiseless Auto Leveling, with Beginner Software Pack, Creality 3D Printer Bed Leveling Sensor Kit for Ender 3 Pro/ Ender 3 V2/ Ender 3/ Ender 5/ Ender 5 Pro

  • 【Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers】The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer...
  • 【Independent Development】Compared with traditional BLTouch or 3D Touch, CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360° translucent protective shell makes CR Touch safer and more exquisite. Positioning accuracy ≤0.04mm, Automatic detection and leveling, can be reused for over 100,000 times..
  • 【Strong compatibility】CR Touch 3d printer auto leveling, Compatible with PEI / sticker bed / glass bed / metal bed.
  • 【Easy to install and easy to use】An SD card comes with our product, which contains all you need for the installation, so that the CR Touch is a plug-and-play upgrade part for your 3D printer..
  • 【After-sales Service】If you encounter unsolvable problems during installation and use, feel free to contact us, the technologist will provide you with detailed solutions within 24 hours..
Check Stock