ReviewsSplit Pulley

GM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))

  • GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore..
  • Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging..
  • Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top..
  • Prusik Minding! The pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik mind....
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Pulley Wheel Stainless Steel Small Pulley Block 360 Degree Rotating Silent Cable Pully Load Bearing Mechanical Pulleys, Silver (Silver-2)

  • Material:Pulley wheel is made of high-quality stainless steel, which is strong, rust-proof, wear-resistant and corrosion-resistant.
  • Whirling:Top of pulley system 360 degrees whirl to prevent the rope from twisting, maintain a stable cable pulley block,load bearing.
  • Quiet:Rope puller smooth sliding, small high-quality nylon slot double bearing design pulley pro does not produce noise.
  • Install:Pulley hoist can be installed on wood, wall and metal, rope pulley suitable for home fitness or outdoor work.
  • Gym pulley system:Pulley attachments specially designed for home gym pulley system DIY, construction, cable hoisting etc.
Check Stock

TooTaci Pulley System Set,Pulley Block with Rope and Hooks,Pulley and Rope Kit for Lifting,304 Stainless Steel M20 Single Pulley Wheels,with 20M/4mm Nylon Rope,Hooks,Eye Pad Plate,Cleat Hooks

  • Pulley Block Kit comes with 2Pcs M20 Crane pulley block,2Pcs Carabiner Snap Hook Clips, 2Pcs Oblong Eye Pad Plate, 2Pcs Cleat Hooks, 20 meter Nylon Pulley Line Rope And screw Accessories Ideal Kit to Make an Easy Pulley System for Pulling & Lifting ..
  • This Pulley System Set have all the Items you needed for pulley system rather than have to buy each part separately.
  • This Kit include Pulley Block ,Carabiner Hook, Eye Pad Plate,Cleat Hooks all made of 304 stainless steel, anti-rust and wear resistance with strong structure, easy to fit and use in any weather !.
  • Pulley Block with Ergonomic design, fixed top for easily rope handling.
  • 4mm Pulley Line rope 65ft extreme strong with high tenacity and enough length.
  • Eye Pad Plate & Carabiner Hook provide versatile binding with rigging or anchoring for quick connect of ropes, chains, straps..
  • NOTE: The Maximum Load Capacity of a Single Pulley Block is 50KG/110LB !.
  • Pulley with Rope and Hook Many Uses for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,tarps ,etc....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system, pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,... Perfect doe....
Check Stock

Martin SH 32MM Quick Disconnect Bushing, Sintered Steel, Metric, 32 mm Bore, 47.52 mm OD, 33.33 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 35MM Quick Disconnect Bushing, Sintered Steel, Metric, 35 mm Bore, 55.54 mm OD, 46.03 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SF 11/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.68\ Bore, 3.125\ OD, 2.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock