ReviewsSpring Bolts

Lisle 62300 MacPherson Strut Tool , Black

  • Fits all MacPherson strut spring sizes, import and domestic.
  • This is an inexpensive, but super safe strut spring compressor.
  • Heavy duty clamps and bolts securely hold spring during operation.
Check Stock

Garage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

Ronlap Gate Wheels for Wooden Gate, Gate Caster Spring Loaded for Metal Tube Swing Vinyl Gate Heavy Duty, Outdoor Rolling Fence Gate Support Wheel Rollers Kit, 220 Lbs Capacity, 4-Inch, 2 Pack, Black

  • 【Built-in Spring Design】: Unique spring built-in-design, extends spring’s service life while providing a more beautiful appearance. Built-in spring-loaded clamp acts as a shock absorber when the gate wheels for wooden gate is rolling over uneven or rough surfaces, reducing stress on gate hardware, extending the life of a gate’s posts and hinges.
  • 【1-3/4” Self-regulating Vertical Travel】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
  • 【Heavy Duty Gate Casters】: Thicken matte black power coat finish plating steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each fence gate caster wheel, make it easy to open or close large heavy wooden gates, vinyl gates, metal tube gates, or metal swing gates.
  • 【360° Swivel Wheel for Gate】: 4 inches ageing resistance rubber caster with 360° rotation top plate, great in mechanical strength and loading capacity, easily tr....
Check Stock

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

  • ♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
  • ♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
  • ♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
  • ♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
  • ♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

Universal Leaf Spring Lowering Block Kit 4 Inch

  • This 4" lowering block kit includes just what you need to drop your car's leaf spring rear suspension.
  • Extruded aluminum lowering blocks are 2-1/2" wide and 5" long.
  • U-bolts fit 3" diameter axle housings and are 10" long to fit a variety of applications.
  • U bolts are a premium steel construction and are zinc plated for corrosion resistance.
  • Drops the ride height on vehicles with the axle mounted on top of the leaf springs.
Check Stock

3/8\-16 Double Expansion Shields - (Pack of 12)

  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together..
  • The band or shield is designed to expand during installation..
  • The anchor sits flush with the base material and is designed to accept a screw or bolt..
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration..
  • Screws and bolts can be removed or replaced after installation..
Check Stock

FOLIV 212PCS SAE Hex Bolts Nuts Flat Spring Washers Assortment Kit, Heavy Duty 304 Stainless Steel, 10 SAE Sizes Included

  • GOOD MATERIAL: Made of 304 Stainless Steel, anti-rust and corrosion resistance, FOLIV hex bolts nuts can be used in humid environments..
  • DIFFERENT SAE SIZES: our heavy duty hex bolts kit includes 1/4’’- 20 x 3/4’’, 1/4’’- 20 x 1-1/2’’, 1/4’’- 20 x 1’’, 1/4’’- 20 x 2’’, 5/16’’- 18 x3/4'', 5/16’’- 18 x 1'', 5/16’’- 18 x 1-1/2’’, 5/16’’- 18 x 2’’, 3/8’’- 16 x 2-1/2’’ and 3/8’’- 16 x 1-1/2’’..
  • Package: 53PCS Hex Bolts +53PCS Hex nut+53PCS Flat washer+53PCS Spring washer are included in the package, suitable for users' needs..
  • Easy to carry: All the nuts and bolts are packed in a transparent box with clear size label on it. It is convenient for user to store and use..
  • GOOD AFTER-SALE SERVICE: FOLIV provide good after-sale service for our product quality problem. Please feel free to contact us if you have any questions..
Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, i....
Check Stock

Monroe 172604 Quick Complete Strut Assembly

  • ...ing Plate The new bearing plate helps ensure consistent precise steering return by eliminating “memory steer ” Helps eliminate steering noises commonly associated with worn or corroded bearings Also improves overall steering smoothness (if equipped - front only).
  • Upper Spring Seat Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe strut and upper strut mount The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
  • Coil Spring Manufactured from high-quality U S steel each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height Each spring is painted or powder-coated for excellent rust resistance.
  • Boot Kit The durable strut boot protects the strut rod and seal from dirt and debris The premium bumper prevents component damage when the suspension bottoms out.
Check Stock

Slide-Co 1932 1/2 inch x 1-5/16 inch, Stainless Steel with Plastic Tip, Shower Door Catch

  • Aluminum plunger bolts with black nylon cap.
Check Stock