ReviewsSpring loaded Regulator

GasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice

Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.

Check Stock

Yeeco AC 110V 10000W SCR Electronic Voltage Regulator Motor Speed Control Thermostat Governing Governor dimmer

AC 10000W SCR regulator with aluminum shell and Intelligent fan.
Maximum power: 10000W (connected resistive load), the load cannot exceed the specified maximum power 10000W.
NOTE: Must Pay attention to the temperature rise when using in the first time, if it exceeds 80 °C, please enhance heatsink.
The power must leave 2/3 margin when connect to inductive load or Capacitive load.
If there are any problems with our product, don’t hesitate to contact us, we would do anything for your satisfaction.

Check Stock

5KW 6KW AVR Automatic Voltage Regulator Rectifier for Gasoline Generator W/Carbon Brush Honda GX390

Stop fluctuation of voltage, automatically maintaining generator output terminal voltage at a set value.
Prevent generator from suffering damages of voltage fluctuation or over load..
It uses an electromechanical mechanism, or passive or active electronic components..
According to the design, which is used to manage one or more AC or DC voltage..
In addition to the shunt regulator, the regulator operates through a number of fixed internal comparison of the actual output voltage of the reference voltage..

Check Stock

SILCA EOLO III CO2 Inflator Head Only | Presta & Schrader Compatible | Bicycle Tire Pump CO2 Adaptor | Easy Push to Inflate | Head for Co2 inflator for Bike Tires

Versatile | Looking for a bike pump Presta valve adapter? The Silca CO2 bike tire Inflator is the smallest spool valve CO2 regulator on the market and works with any 16g or 25g threaded cartridge. Co2 inflator Presta and Schrader valves compatible..
Easy to Use | Thread the cartridge on, press it onto the valve, pump with co2, and air is in your tire. Simple press-to-pump design. No lever needed! Lightest spring action of any spring-valve regulator. Works perfectly with the Presta valve pump or the Schrader valve pump..
Airflow Regulation | Light action spring provides easy control over how much co2 is released. Press this EOLO III Silca pump lightly for lesser air in your tire or put more pressure for faster tire inflation..
Great Emergency Kit Tool- The small and lightweight quality of the EOLO make it essential for your bike repair kit or bicycle tire repair kit. Perfect to keep in your saddle bag, pocket or your Silca Premio. You can count on this tiny tool to get you home in a pinch!.
Camera-lens' Style Valve Head | Allows for easy installation even in disc wheels.This Silca tool features 3 (Red, White, Green) insulation rings to prevent frozen fingers from co2 inflator cartridge..

Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.

Check Stock

YICBOR Singer Featherweight Portable Thread Stand for Singer 221 222K Pfaff Elna Bernina Butterfly Old Household Sewing Machines

SINGER 221 FEATHERWEIGHT QUILTING FOOT SPRING TYPE 1/4" PART #P60610.
Durable, Sturdy, Steel, Hinged, Low-Shank, with 1/4” (6mm) Spring Seam Guide, Sewing Machine Foot. The Spring Seam Guide allows for perfect, precise, exact uniform seams for patchwork quilting, piecing and topstitching. The fabric glides on the black spring guide to provide a consistent 1/4” (6mm) distance from the spring guide to the needle..
NOT COMPATIBLE WITH JANOME/ELNA/KENMORE TOP LOADING BOBBIN SEWING MACHINES. THESE TOP LOADING BOBBIN SEWING MACHINES HAVE A DIFFERENT CENTER NEEDLE POSITION..
fits Babylock , Brother, Singer, White, Kenmore, Janome, Viking Husqvarna, Elna...LOW SHANK SEWING MACHINES..
will fits Babylock Bernette Bernina Brother Elna (Side Loading Bobbin) Euro-Pro Husqvarna Viking Husky Series Janome (Side Loading Bobbin) JUKI Kenmore (Side Loading Bobbin) Necchi New Home Simplicity Singer White.

Check Stock

ABN Spring Loaded Center Punch, Automatic Center Punch Tool – Auto Center Punch, Awl Punch Hole Punch Tool, 5in

EASY TO USE SPRING PUNCH TOOL: Put away your hammer, pilot, and center drill and instead use the ABN Center Punch Spring Loaded Nail Setter Tool to make or mark the center of a hole you wish to create.
Press down on the nail set tool until the tip of the hammer nail fully retracts into the handle, the spring-loaded trigger will release, and the blade of the metal punch tool will mark the workpiece.
FITS YOUR PROJECT: Nail spring tool marks your workpiece with a dimple to give you a starting point that prevents screws and drills from wandering.
Use this automatic center punch for metal, wood, glass, canvas, plastic, and leather materials.
Use this spring loaded center punch glass break window breaker to enter a car in emergencies or use as a spring loaded awl for your belts or purses.
ADJUST FOR ACCURACY: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
BUILT TO LAST: Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.

Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
The valve spool has annular grooves to help center the valve in the bore..

Check Stock

Ronlap Gate Wheels for Wooden Gate, Spring Loaded Gate Caster Heavy Duty for Metal Tube Swing Gate, Small Fence Gate Support Wheel with Universal Mount Plate, 220 Lbs Capacity, 4 Inches, 2 Pack, Black

【Built-in Spring Design】: Innovative spring built-in-design, extends spring’s service life while providing a more beautiful appearance. The built-in spring-loaded clamp acts as a shock absorber when the gate wheels for wooden gate roll over uneven or rough surfaces, reducing stress on the gate hardware and extending the life of a gate's posts and hinges.
【Spring-loaded Gate Caster】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
【Heavy Duty Gate Wheel】: Thicken matte black power coat finish plating steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each gate wheel, make it easy to open or close large heavy wooden gates, vinyl gates, metal tube gates or metal swing gates.
【360° Swivel Fence Gate Wheel】: 4 inches ageing resistance rubber caster with 360° rotation top plate, great in mechanical strength and loading capacity, easily transform to any di....

Check Stock

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.

Check Stock

Voltage Regulator Reducer, 48V 36V to 12V Regulator Reducer Transformer, 10A 120W DC 12 Volt Voltage Regulator, Application for Golf Cart, Club Car and More Car Truck Vehicle…

【CONVERTER VOLTAGE REDUCER】➤➤Converter Input: Voltage: 48V Nominal, Voltage Range: 30 to 60 volt DC(36V/48V).
Conveter Output: Voltage: DC 12V(Fixed Output), Current: 10A, Output Power: 120w. Conversion Maximum Efficiency: ≥97%.
【WIDE APPLICATION】➤➤12v voltage regulator apply for golf cart and club car and more car truck vehicle. Convert the 48 volts to the 12 volts needed for the led light/Audio/radio..
【SUPERIOR QUALITY】➤➤Made of aluminium shell and silicone sealed, 12v dc voltage regulator is durable for a long time service. 100% waterproof, anti-dust, corrosion, shock. Golf cart converter can run effectively and safely in the range of -40°C~80°C..
【FUNCTION】➤➤The volt regulator is mainly use to reduce the voltage. Prevent the problems of over-heat /over-current /over-load /short-circuit. Easy to install. Note: We don't provide the installation instructions.
【12-MONTH WARRANTY】➤➤We provide 12 month warranty and lifetime service. If the reducer have any problems, please contact us and we will reply you as soon as possible within 24 hours. This package include 1Pcs Converter.

Check Stock