ReviewsSpringfield Taper Lock Bushing

CTS 500K Pot Short (3/8 inch) Solid Shaft Audio Taper - 10% Tolerance - Pair (2X)

  • PAIR of CTS 450G POT 500K SOLID SHAFT Audio Taper Pot - 10% Tolerance.
  • 3/8" High X 3/8" Diameter Brass Bushing 1/4" Diameter Brass shaft.
  • 1/4" Diameter Solid Shaft - Requires Knobs That Fasten with a Set Screw.
  • Mounting Hardware included. 1X Lock Washer, Dress Washer and Nut.
Check Stock

(3x) CTS 450G 250K Brass Short (1/4\) 10% Audio Taper Potentiometers for Electric Guitar

  • 250K Short Split Audio Taper Pots - 10% Tolerance - suitable for tone or volume control.
  • 1/4" High X 3/8" Diameter Bushing, 24 Tooth Fine Spline Shaft Solid Brass Bushing & Shaft.
  • Low Friction Rotation & Bakelite base plate.
  • CTS 450G Series Made Specifically for Use in Guitars.
  • Imperial Sized - NOT for import guitars using metric components.
Check Stock

CTS TAOT Custom 500K SHORT Split Shaft Audio Taper Pots - Set of Four (4X) - 10% Tolerance – 450G

  • TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT.
  • Short Split Shaft (3/8" Height X 3/8" Diameter Bushing).
  • 24 Tooth Fine Spline .236" Diameter Shaft.
  • Audio Taper suitable for both Volume & Tone controls.
Check Stock

VPABES Woodworking Chisel Mortiser Drill Press Mortising Attanchment Kit, Professional Mortising Drilling Machine Accessorie Woodworking Mortising Locator Tool with 4 Bits

  • Bushing for a Series s holder 40-position tool posts.
Check Stock

CTS Pot, 500k Audio, Long Split Shaft (4 Pack)

  • Genuine CTS pots, the brand used by nearly every American guitar company for half a century!.
  • 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper..
  • 24-tooth knurled split-shaft, for 24-tooth plastic knobs that push on. Included brass sleeves convert shafts to quasi solid-shaft, for knobs with setscrews..
  • 3/8-32 bushing thread is 3/8" diameter, 1/2" long. For rear-routed guitars..
  • CTS low torque design (dimpled back) is easy to turn..
Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock