ReviewsSpur Point Bit

Dewalt DT4582-QZ Self-Feed Drill Bit, 51mm

  • They have two sharp cutting edges and an aggressive 'self feed' spur for Rapid penetration into material.
  • They are fitted with a non-slip shank for better in chuck bit retention.
Check Stock

Diablo 1 in. x 6 in. SPEEDemon Spade Bit (2-Pack)

  • SPEED-TIP self-feed design effortlessly pulls the bit with minimal effort and faster holes.
  • Optimized curved paddle design quickly removes chip build-up for more holes per charge.
  • Impact Strong increases shank stability and durability.
  • Angled spur cutting edge scores wood for clean holes and reduced blowout.
  • Maximum performance in cordless and corded impact and drill drivers.
Check Stock

12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits • Ideal for Wood • PVC • Resin • Composite • MDF and Drywall (Sheet Rock) Materials

  • Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them..
  • Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!.
  • Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4’s, 6 x 6’s, PVC, Resin’s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects..
  • Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won’t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent....
Check Stock

IVY Classic 46180 5-Piece Forstner Bit Set, High-Carbon Steel, Wooden Case

  • Tapered rim cuts clean, smooth pocket holes, angled holes and flat bottom holes in wood and plywood, Swift Bore (Registered Trademark).
  • Two-cutter design for maximum cutting and chip removal.
  • High-carbon steel construction with Rockwell hardness 45-53.
  • Set includes: 3/4, 7/8, 1, 1-1/4, and 1-3/8" bits. Length: 3-1/2.
Check Stock

Big Agnes Gear Loft Tent Accessory, Triangle

  • Keep your essentials within reach with a lightweight mesh gear loft that hooks onto the loops in your Big Agnes tent..
  • Please check your tent for compatability.
  • Compatible with Fly Creek HV UL 1/2 (standard, Platinum), Tiger Wall UL 1/2/3 (standard, mtnGLO, Platinum) Copper Spur Platinums, Copper Spur HV UL 1/2/3 (standard, mtnGLO), Fly Creek HV UL Bikepack 1/2, Copper Spur HV UL Bikepack 1/2, Seedhouse SL 1/2/3, C Bar 2/3, Copper Spur HV Expedition 2/3.
Check Stock

1 Pair Western Style Antique Spur, Male Knights Equestrian Equipment Spurs for Boots, Horse Riding Ornaments Low Carbon Steel Carving Spurs with Hand Engraved Trims

  • Western Antique Spurs, Men Knight Equestrian Equipment Spurs- Western-style spurs, hand-crafted and beautifully carved, suitable for all riding boots and male knights, creating a versatile denim temperament. Which can helps to improve leg skills or train horses, improve equestrian skills, assist in communication between knights and horses..
  • Horse Riding Ornaments Black Steel Engraved Spur- Western Style Antique Spurs are made of black low carbon stee materials, durable and not easy to bend, strong and resistant to corrosion. The rotating tooth roller not only can effectively control the horse, but also reduce the damage to the horse. The carved stud and the metal pendant at the end. At each step, a clang sounds and takes you into the wild Western world..
  • Wide Applications of the Horse Spur- The curved gear thorn reduces the stimulation of the horse and avoids significant damage to the horse. Knight Equipment Spurs are suitable for all kinds of occasions, such as training horses/ equestrian events/ dressage/ sports/ entertainment/ performances/ farms/ ranch etc..
  • Easy to Operate and Use- The slot is located at the rear and can be fixedly mounted between the spur gear and the belt. Spurs for Boots, Western Retro Cowboy Black Carbon Steel Carving Spurs wit....
Check Stock

Diablo by Freud DSP1090 1-1/2 in. x 4 in. SPEEDemon Spade Bit Multi, One Size

  • SPEED-TIP self-feed design effortlessly pulls the bit with minimal effort and faster holes.
  • Optimized curved paddle design quickly removes chip build-up for more holes per charge.
  • Impact Strong increases shank stability and durability.
  • Angled spur cutting edge scores wood for clean holes and reduced blowout.
  • Maximum performance in cordless and corded impact and drill drivers.
Check Stock

MAX-CRAFT HSS Cobalt Drill Bit Double End 30# (0.1285') Stubby Body Drill Steel Metal Iron-10Pcs

  • ✔️DOUBLE END DRILL BIT SIZE:  30#(0.1285")Diameter) x 5/8"( Flute Length) x 2" (Overall Length).
  • ✔️MATERIAL: HSS Cobalt Material is the best hardened material for drilling longest life.
  • ✔️DOUBLE END CUTTING POINT :The 2 cutting point of one single drill bit, when one cutting point is used bored and the other cutting end can be used, as another new drill bit..
  • ✔️SPLIT POINT 135 DEG. ANGLE: No center punch is needed-- the aggrevsive 135 Deg. Split Point quick-cut points are self-centering and penetrate quickly with less pressure..
  • ✔️APPLICATION: Drill through stainless steel, general steetl, metal sheet, iron, copper, aluminum, plastic….
Check Stock

Sumind 5 Pieces 54T 0.8 32 Pitch Plastic Spur Gear Compatible with 4x4 VXL Rally VXL HPS HPI RC Car and Boat

  • You will receive: 5 pieces of 54 tooth 0.8 32 pitch spur gear, meet your replacement needs and you can share them with your friends who love the....
  • Advantage: these spur gears allow you to control(such as increase or decrease) the final drive ratio and tune according to your situation for....
  • Quality materials: this plastic spur gear is made of plastic, lightweight and easy to install, you can use for a long time.
  • Wide application: the plastic spur gear is suitable for most of model car, such as compatible with 4x4 VXL Rally VXL RC vehicles, HPS. HPI and so on.
  • Suitable size: each spur gear measures approx. 0.8 module, which is compatible with 32 pitch or 8 module pinion gears.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

Wbestexercises 1 Pair Bass Drum Legs,Iron Plating Metal Anti-Rust Stable Bass Drum Leg, Drum Stands Replacement for Percussion Instrument

  • 【Ideal Accessory】Drum Spur With Metal chromium plating, this bass drum spurs is beautiful and durable. Perfect instrument part for the student and beginner musicians,universal accessories for bass drum..
  • 【Long Term Use】Bass Drum Spurs With Bracket have undergone strict quality to guarantee the safety and reliability so that conducive to our longterm use..
  • 【Environmental Material】Professional Bass Drum Spurs With Bracket adopts firm screw design, more stable to use. Environmentalfriendly material, safer and more freely to use. The distances between screw holes on the mounts is 3cm..
  • 【Not Easy to Deform】Bass Drum Spurs Irom material, bass drum spurs can stand steadily and won't easy to deform. Antirust, it can be used for s long time without being erode..
  • 【Standard Specification】Drum Spur With Fittings Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control..
  • 【Ideal Accessory】Drum Spur With Met....
Check Stock