ReviewsSquare Bend U Bolt

Armored Personnel Carrier

  • Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
  • Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
  • Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
  • Package：Provide U bolt and 4 lug nuts are supplied.
Check Stock

CE Smith 27620 Guide-ON Post 40\ H Beige

  • Fits Frames up to 3" W x 4-1/4" H 1-1/2" square, 16 gauge pre-galvanized steel uprights 18" high.
  • For larger trailer frames check out our Large Frame U-Bolt Kit (11416): Fits trailer frames up to 3 inch wide x 5-1/4 inch tall.
  • 2" schedule 40 white PVC posts (2-3/8" actual OD).
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

  • ... Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
  • Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
  • Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
  • Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then，drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, place the nuts and hand tighten the washers. At last, finish with the wrench..
Check Stock

Discount Ramps RV or Camper Trailer Bumper Bike Rack for 1-2 Bicycles

  • Transports 1-2 bicycles on an RV or camper trailer bumper (max 60 lb. capacity).
  • Designed for 4″ to 4.5″ square RV bumpers, installs with (2) 6.5″ U-bolts around the RV bumper.
  • 1.75″W Tire wells with 6.5″ spacing between wells, 4.5″ from bolt to first well.
  • Single L-style support tie-down 19.5″H brace (bicycle tie-downs sold separately).
  • Heavy duty steel construction with a black paint finish.
Check Stock

ReadyLift 67-5012 Sway Bar Bracket

  • COMPATIBLE WITH 1995 - 2022 Toyota Tacoma (2WD 4WD). *Does NOT fit 5-Lug models..
  • CONTENTS: (2x) High-Strength Steel Rear Lift Blocks - 9/16 Pin, (4x) Square Bend 9/16th U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: 1 inch rear suspension lift. | *Please note that our lift block kits are designed to be installed directly to your truck's factory....
  • INSTALLATION: Designed to be installed simply and easily by placing our lift blocks between your axle and OE leaf pack, and then securing everything....
  • BENEFITS: Improves the look of your vehicle and increases rear-end ground clearance, allowing you to fit larger custom rims and tires. Due to their....
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

XIEKRAB 2Pcs Heavy Duty 2 inch Muffler Clamps Rustproof, 2" Exhaust Pipe Diameter, Black Saddle Style U-Bolt Clamp

  • 【Practical Tool】：Brand XIEKRAB Heavy duty u-bolt clamps exhaust saddle style..
  • 【Material】：Made of high quality industrial steel with black zinc coating on the surface to prevent corrosion and rusting for use in bad weather..
  • 【Durable & Safe】：Designed to ensure a tight, leak-resistant connection, XIEKRAB U-bolt clamps are manufactured from durable and robust material for long service life..
  • 【Easy to Use】：Inside diameter (ID) Applicable pipe size,No welding design, easy to install and dismantle for use and improve efficiency..
  • 【Package Content】 Includes saddle, u-bolt & nuts and one wrench，Carton packing..
Check Stock

Defender Security U 9961 4-Inch Surface Bolt, Solid Brass, Polished Brass Finish

  • VERSATILE SURFACE LOCK – The U 9961 Surface Bolt can be mounted vertically or horizontally and is effective for keeping doors, cabinets and closets closed, deterring kids and pets from getting in or out from certain areas of your home, and so much more..
  • GREAT FOR CHILD PROOFING – The surface bolt lock is a great alternative to traditional products to baby and child proof your home. It can be installed out of the reach of inquisitive toddlers and adds a level of security to many areas of your home. Great for pet-proofing too!.
  • EASY INSTALLATION – Installation is quick and easy! The surface bolt includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications..
  • DURABLE CONSTRUCTION – The surface bolt lock is constructed from solid brass with an attractive polished brass finish. It is built to last..
  • PRODUCT INFO – The U 9961 Surface Bolt is 4” in length and includes two different keepers for surface or mortise installations..
Check Stock

Defender Security U 10307 4-Inch Surface Bolt, Solid Brass, Classic Bronze Finish , Gray

  • VERSATILE SURFACE LOCK – The U 10307 Surface Bolt can be mounted vertically or horizontally and is effective for keeping doors, cabinets and closets closed, deterring kids and pets from getting in or out from certain areas of your home, and so much more..
  • GREAT FOR CHILD PROOFING – The surface bolt lock is a great alternative to traditional products to baby and child proof your home. It can be installed out of the reach of inquisitive toddlers and adds a level of security to many areas of your home. Great for pet-proofing too!.
  • EASY INSTALLATION – Installation is quick and easy! The surface bolt includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications..
  • DURABLE CONSTRUCTION – The surface bolt lock is constructed from solid brass with an attractive classic bronze finish. It is built to last..
  • PRODUCT INFO – The U 10307 Surface Bolt is 4” in length and includes two different keepers for surface or mortise installations..
Check Stock