ReviewsSquare Head Wood Screw

The Hillman Group 48260 8 X 3-Inch Square Drive Multipurpose Wood Screw 250-Pack

  • Flat head with countersinking nibs allows the screw to drive clean and flush to the surface.
  • Square drive for confident stick fit while driving.
  • Not recommended for exterior projects or treated lumber.
  • Yellow zinc finish complements most wood finishes.
Check Stock

LIONMAX Pocket Screws #8 x 1 Inch, Wood Screws Coarse Thread 600PCS, Washer Head Square Drive Screws for Pocket Hole, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 1 Inch Pocket Hole Screws 600 Pieces, 150MM Square Drive Bit Included..
Check Stock

3/8-16 x 4 Stainless Steel Carriage Bolts with Hex Nuts and Flat Washers 304 Stainless Steel 18-8 Square Neck Bolts and Nuts Assortment Full Thread Coarse Thread 6 Sets

  • Package Contents: 6 Sets, each set includes one piece carriage bolt, hex nut and flat washer..
  • Screw Length: 4 inch or 100mm (measured from under the round head, including the square neck height).
  • Design feature: Big round domed head designed to eliminate the need for a washer.
  • Square neck underneath the head helps self locking..
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

1/4-20 x 2-1/2' Stainless Steel Carriage Bolts with Hex Nuts and Flat Washers 304 Stainless Steel 18-8 Square Neck Bolts and Nuts Assortment, Full Thread, Coarse Thread, 10 Sets

  • Package Contents: 10 Sets, each set includes one piece carriage bolt, hex nut and flat washer..
  • Screw Length: 2-1/2 inch or 63mm (measured from under the round head, including the square neck height).
  • Design feature: Big round domed head designed to eliminate the need for a washer.
  • Square neck underneath the head helps self locking..
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

Velocity Interior Wood Screw DIY Pack – 200 Wood Screws, Carbon Steel Screws with Zinc Plating, Includes 1 PSD ACR Drive Bit and Stick-Tight Technology (Size #6x1 1/2, 200 Pieces)

  • ...PATENTED PSD ACR DRIVE SYSTEM: These wood screws come with a patented PSD ACR Driver bit that fits perfectly into the recess, providing Stick-Tight Technology that allows the screw to stick to the bit for a stable, anti-wobble, one handed installation. This recess is compatible with commonly used Phillips, Pozi and square drives..
  • ADVANCED DESIGN: The interior screws are designed with shank slots placed up the shaft to reduce splitting while ensuring fast starting and insertion speeds. They also feature a screw thread rolled right to the tip on every screw for instant starts..
  • PERFECT DIY SCREW KIT: This Velocity DIY screw organizer kit is small, convenient, and easily portable in a plastic organizer. The kit comes with all you need for a range of small work, including our patented PSD ACR driver bit..
  • SUPERIOR, RELIABLE PRODUCTS WITH PHILLIPS: Velocity a brand of the Phillips Screw Company is based in the USA. The Philips Screw Company has been the leading innovator of building materials and fastener technology since 1935. As industry experts, we’ve become the desired brand for professional tradesmen and DIY’ers alike..
Check Stock

Velocity Interior Wood Screw DIY Pack – 100 Wood Screws Carbon Steel Screws with Zinc Plating Includes 1 PSD ACR Drive Bit and Stick-Tight Technology Size #8x1 1/2 100 Pieces

  • ...PATENTED PSD ACR DRIVE SYSTEM: These wood screws come with a patented PSD ACR Driver bit that fits perfectly into the recess, providing Stick-Tight Technology that allows the screw to stick to the bit for a stable, anti-wobble, one handed installation. This recess is compatible with commonly used Phillips, Pozi and square drives..
  • ADVANCED DESIGN: The interior screws are designed with shank slots placed up the shaft to reduce splitting while ensuring fast starting and insertion speeds. They also feature a screw thread rolled right to the tip on every screw for instant starts..
  • PERFECT DIY SCREW KIT: This Velocity DIY screw organizer kit is small, convenient, and easily portable in a plastic organizer. The kit comes with all you need for a range of small work, including our patented PSD ACR driver bit..
  • SUPERIOR, RELIABLE PRODUCTS WITH PHILLIPS: Velocity a brand of the Phillips Screw Company is based in the USA. The Philips Screw Company has been the leading innovator of building materials and fastener technology since 1935. As industry experts, we’ve become the desired brand for professional tradesmen and DIY’ers alike..
Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock

LEIGH Box Joint & Beehive Router Jig, Model B975

  • ...cording to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
  • Complete pocket hole fixture system-fixture kit includes::1* pocket hole jig with clamp1* Step Drill Bit (replaceable)1* screwdriver (replaceable)1*steel stop collar1* square drive bit2* drivepipe1* Hex wrench 1* 6 in square drive bit20 coarse square drive screws20 fine square drive screws.
Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
Check Stock

Velocity Interior Wood Screw Contractor Pack – 450 Wood Screws, Carbon Steel Screws with Zinc Plating, Includes 1 PSD® ACR® Drive Bit and Durable Bulk Screw Storage Organizer (Size #8 x 2\)

  • ...PATENTED PSD ACR DRIVE SYSTEM: These wood screws come with a patented PSD ACR Driver bit that fits perfectly into the recess, providing Stick-Tight Technology that allows the screw to stick to the bit for a stable, anti-wobble, one handed installation. This recess is compatible with commonly used Phillips, Pozi and square drives..
  • ADVANCED DESIGN: The interior screws are designed with shank slots placed up the shaft to reduce splitting while ensuring fast starting and insertion speeds. They also feature a screw thread rolled right to the tip on every screw for instant starts..
  • LARGE PACKS FOR LARGE JOBS: Our Velocity Contractor Packs are perfect for bulk buying screws and come in a large plastic container with a handle for easier transport and organizing..
  • SUPERIOR, RELIABLE PRODUCTS WITH PHILLIPS: Based in the USA, The Philips Screw Company has been the leading innovator of building materials and fastener technology since 1935. As industry experts, we’ve become the desired brand for professional tradesmen and DIY’ers alike..
Check Stock