ReviewsSquare Proximity Switch

uxcell a11021800ux0169 SN04-N DC 10-30V 200mA NPN NO 3-Wire 4mm Approach Sensor Inductive Proximity Switch

  • Size : 18 x18 x 36mm/0.7" x 0.7" x 1.4"(W*H*L).
  • Hole Size : 0.9 x 0.4cm/0.35" x 0.2"(L*W).
  • Package Content : 1 x Proximity Sensor Switch,2 x Screws.
Check Stock

Approach Sensor, SN04-N DC NPN 3-Wire Inductive Proximity Switch 5mm Detecting Distance Normally Closed Proximity Sensor Switch

  • 5MM LONG DETECTION DISTANCE: This is a professional normally close proximity switch sensor with 5mm detection distance. Detection object: magnetic metal (detection distance is reduced when non-magnetic metal).
  • GOOD DETECTION SWITCH: When proximity switch is close to some target object, it will send out control signal..
  • AUTOMATIC CONTROL COMPONENT: It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching..
  • OUTSTANDING PERFORMANCE: The approach sensor has the advantages of high sensitivity, quick response, stable performance..
  • NON-CONTACT DETECTION: Non-contact detection avoids the sensor and the target object from damages..
Check Stock

Taiss/ 2m Sensing Feedback Reflex photoelectric Switch Sensor E3F-R2NK 6-36VDC NPN NO(Normally Open)Proximity Switch Diameter 18mm E3F-R2N1

  • Proximity switch is a position sensor with switch output that can be connected with microcomputer.
  • It also can drive directly from, electromagnetic relays, counters and contactor to achieve automatic control purposes.
  • It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching..
  • When proximity switch is close to some target object, it will send out control signal..
  • It's widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial etc..
Check Stock

Taiss 2pcs LJ12A3-4-Z/AX Inductive Proximity Sensor Detection Switch NPN NC DC 6V-36V 4mm Normally Close Proximity Switch 6-36V Approach

  • Product Name : Inductive Proximity Switch.
  • Wire Type : 3 Wire Type (Brown, Blue, Black).
  • Switch Appearance Type : Cylinder Type, Metal Shell.
  • Supply Voltage : DC 6-36V Output Current : 300mA.
  • Total Size : 66 x 21mm/ 2.6'' x 0.8'' (L*Max.D).
  • Package Content : 2 x Inductive Proximity Switch.
Check Stock

uxcell 1-15mm Inductive Proximity Sensor Switch Detector NO AC 110-220V AC 90-250V 500mA 2-Wire PR30-15AO

  • 【Specification】: Detecting Distance: 15mm.
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity..
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, paper making, light industry for limiting station, orientation taking count, speeding trial etc..
Check Stock

Taiss LJC18A3-H-Z/BY Proximity Switch 1-10mm Distance Measuring Capacitance Proximity Sensor Switch PNP NO(Normally Open)DC 6-36V 300mA M18 3-Wire

  • Product name: Capacitive Proximity switch.
  • wire Type: DC 3 wire Type (Brown, black, Blue).
  • Detecting object: metal or non-metal material.
  • Operating temperature: -25 c to +65 c (non-freezing condition).
  • Size: 7. 5 x 4cm/3'' x 1. 6'' (l*max. Dia).
  • package content: 1 x Capacitive Proximity switch.
Check Stock

Taiss 1pcs LJC18A3-H-Z/BX 1-10mm Sensor Switch Capacitance Proximity Sensor Switch NPN NO(Normally Open) DC 6-36V 300mA M18 3-Wire

  • Special attention: After the switch is installed, the sensing distance needs to be adjusted, otherwise, there will be no response when the switch is turned on.There are two friends recently. The reaction product does not work, First note: our products are 100 % tested before they leave the factory. Solution: 1. Turn Switch control sensing distance behind the product.
  • 2 .Send us an email and we will send you a new one..
  • Product Name : Capacitive Proximity Switch.
  • Wire Type : DC 3 Wire Type (Brown, Black, Blue).
  • Operating Temperature : -25 to +65 Celsius (Non-freezing Condition).
  • Detecting Object : Metal or Nonmetal Material.
  • Package Content : 1 x Capacitive Proximity Switch.
Check Stock

Taiss 2PCS M12 4mm Sensing DC 5V NPN NO(Normally Open) 3D Printer LJ12A3-4-Z/BX-5V Cylinder inductive Proximity Sensor Switch Work Voltage 5VDC Special for MCU

  • Product Name : Inductive Proximity Switch.
  • Wire Type : 3 Wire Type (Black, Brown, Blue).
  • Operating Temperature : -25°C to +55°C (Non-freezing Condition).
  • Size : 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia).
  • Package Content : 2 x Inductive Proximity Switch.
Check Stock

uxcell 4mm Inductive Proximity Sensor Switch Detector PNP NO DC 5-30V 200mA 3-Wire SN04-P for 3D Printer Probe Bed Leveling,MCU Board

  • 【Specification】: Detecting Distance: 4mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue).
  • Switch Appearance Type: Rectangular Type.
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 200CM copper wire, strong and durable, and excellent electrical conductivity..
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc..
Check Stock

Vensans Capacitive Proximity Sensor Switch, LJC18A3-B-Z/AX Capacitive Proximity Sensor Switch 3 Wires NPN NC

  • 【Product Usage】Metal shell. It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching..
  • 【Basic Function 】When proximity switch is close to some target object, it will send out control signal..
  • 【Widely Use】The Proximity Sensor Switch is used for testing parts such as size and speed. Test objects: metal, and non-metal such as plastic, glass, water, oil, etc..
  • 【Perfect Accessory】Also be used in frequency counters, frequency pulse generator, liquid level control and processing procedures for the automatic convergence..
  • 【Operating Instructions】The detection distance varies with the conductivity, dielectric constant, water absorption rate and volume of the tested body, and a large detection distance can be obtained for the grounded metal..
Check Stock

Taiss 1Pcs LJ18A3-8-Z/BX-5V M18 8mm Sensing DC 5V NPN NO(Normally Open) 3D Printer Cylinder inductive Proximity Sensor Switch Work Voltage 5VDC Special

  • Product Name : Inductive Proximity Switch.
  • Wire Type : DC 3 Wire Type Brown, black, Blue).
  • Operating Temperature : -25C to +55C (Non-freezing Condition).
  • Size : 7 x 3cm/2.8'' x 1.2'' (L*Max. Dia).
  • Package Content : 1 x Inductive Proximity Switch Special note: if the product you received is damaged or does not work properly, please contact us by email in time, and we will replace the new product for you free of charge.
Check Stock