ReviewsSquare Shank Taps

NEIKO 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece Easy Out Screw Extraction | Broken Bolt remover | 1/8” to 7/8” in 1/32” Increment | Cr-Mo | Stripped Fastener Tool

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Drill America 1/8'-27 NPT Pipe Tap, Carbon Steel, DWTPT Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
  • DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
  • HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
  • MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
  • HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stock

Drill America DWTPT1-1/2 1-1/2\-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

MaxTool 1\-14P Hand Thread Taps HSS M2 Plug Taps 14 TPI FULLY GROUND RIGHT HAND; HPF02W00R100F

  • The premium high speed steel M2 material provides long tool life.
  • The straight flutes are suitable for threading through holes and blind or bottoming holes.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

MaxTool 3/8-16 Spiral Flute Taps HSS M2 Thread Taps 16 TPI FULLY GROUND RIGHT HAND; SFF02W02R24

  • The premium high speed steel M2 material provides long tool life.
  • Suit for threading blind holes in steel and Non-Ferrous material.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

  • The premium high speed steel M2 material provides long tool life.
  • Suit for threading blind holes in steel and Non-Ferrous material.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

MaxTool 1/2-13 Spiral Flute Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SFF02W02R32

  • The premium high speed steel M2 material provides long tool life.
  • Suit for threading blind holes in steel and Non-Ferrous material.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

ATOPLEE Metric Thread Tap,M12 HSS Right Hand Thread Tap (M12x1.25)

  • 【Material】This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps..
  • 【Size】Thread Diameter:12mm,Total Length:88mm.
  • Shank Diameter:9mm, Pitch:1.25mm；Thread Length：28mm..
  • Square Head Size:6.8x 6.8mm (L*W) ,Net Weight:0.045 kg.
  • 【Usage】When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials..
  • 【Package Included】 1pcs Metric Right hand Thread Tap.
Check Stock