ReviewsSquare Stainless Tubing

Speedway Motors Speedy Notcher Roll Cage Tube Joint Tubing Notcher with Instructions, Built-In Protractor Gauge with Degree Angle, Premium Holesaw Blade

Fantastic tool and is a ‘must have’ for making custom fabricated tube chassis, roll cages and header/exhaust work.
Works well with 9/16" to 2" O.D. tubing, useful in joining different sized tubing.
Ideal for anything that you need to put an angle onto the end of either round or square tubing for tight notches and perfect fit.
Incorporates and includes a built-in protractor gauge to quickly and easily set the degree angle of the tubing where end matches up to mating tubing.
Takes the challenges and difficulty out of making 40° to 90° angled tubing joints and makes angled tubing joints quickly and accurately.

Ideal to cut drip tubing, air compressor hosing, air line, air hose, rubber hose..
The Hose cutter cuts air hose perfect 90 degree and nice, smooth, square end..

This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..

Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
- 110v AC (Available in 12vdc and 220v on request).
- Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..

...e 3 compact PTFE tube cutter, 3.2 inch/ 8 cm in length, 0.92 inch/ 2.3 cm in width and 1 inch/ 2.5 cm in height.
They are small in size, compact in structure and easy to carry, has a cutting capacity of 1/8 inch to 3/4 inch (3 mm to 19 mm).
Quality material: the fuselage by durable, high impact of polyacetal and 304 stainless steel blade, blade is replaceable, fixed by screw, you can according to their own need to replace the blade.
Stable structure, long service life, can work in high temperature and high pressure environment, can be applied for a long time.
Smooth cutting: the hardness of the cutting part is pointed to ensure smooth cutting, which can improve the installation speed and reduce the risk of leakage caused by uneven cutting.
Our cutter is designed to cut tubing efficiently, accurately and cleanly.
Safe and efficient: tube cutter with self-supporting design saves the inconvenience of cutter, it can click and cut quickly by pressing the tail.
In addition, because the blade is pointed, self-supporting can safely keep the cutter can be closed when not in use, can not only prolong the life of the blade and protect your safety.
Widely use: suitable for various types of soft pipes: PU, PE, Nylon Tube, PVC, etc..

Insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run.
Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants.
Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.

Insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run.
Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants.
Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.

Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
Quick-adjust feature provides the user with fast cutting speeds.

Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
Quick-adjust feature provides the user with fast cutting speeds.

Attaches to almost anything, great for UTVs.
Attaches to tubing 3/4in. to 2in. in diameter.
Attaches to square tubing 1/2in. to 1.25in.
Attaches to plastic, aluminum, steel, fiberglass, etc,.
3 Mounting options - clamped, drilled through with blocking plate or drill and tapped to .25-20 thread.

Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
- 110v AC (Available in 12vdc and 220v on request).
- Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor us e - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..