ReviewsSquare Tube Threaded Insert

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
In very Harder wood such as white oak or maple, drill a hole size (3/8.

THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..

Specially designed for 2” prime focus, the adapter features large 40mm through hole and takes you directly from the cameras bayonet mount to a 2" Barrel with as few wasted photos..
Fits all Nikon DSLR cameras: D1, D2, D3, D3S, D3X, D35, D4, D40, D40X, D50, D60, D70, D80, D90, D100, D200, D300, D300S, D600, D700, D750, D800, D800E, D810, D3000, D3100, D3200, D5000, D5100, D5200, D7000, etc..
Standard 2" barrel size to insert to 2" telescope focuser or other accessories. Threaded for Standard 2" Eyepiece Filters (48mm) (thread inside tube)..
Baffles is machine-threaded and anti-reflection painting process to reduce internal reflections..
All metal construction. Anodizing Aluminium process..

THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..

Material: spring steel.Galvanized surface..
Metal star blades are designed to be inserted into steel tube feet..
When inserting the threaded insert into the tube, the star washer/clip usually bends to bend in the direction of entry. Then, the edge of the clamp bites into the inner diameter of the pipe to provide firm support..
The outer edge is flush with the outer edge of the pipe to provide a neat appearance..

Turn your Sawyer screw on/off filter into an inline filtration system for your hydration pack with this simple accessory.
Screw the connections onto the each side of squeeze filter, then insert the filter inline into your hydration pack drink tube.
Compatible with the Sawyer Squeeze Filter and the Sawyer Dual Threaded MINI Filter (not included).
Designed for use with industry standard 1/4-inch inner diameter tubing.

2" square hollow tube insert used in fabrication of products like ball mounts and other receiver mounted items. 5/8" pin hole, 24" length..
Center of pin hole is 2-1/2 inches from end of tube. 3/16 wall thickness..

14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
[Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
[Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
nails/wood screws recommended, not required or included).
[Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not included).

20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..

2" square hollow tube insert used in fabrication of products like ball mounts and other receiver mounted items. 5/8" pin hole, 24" length..
Center of pin hole is 2-1/2 inches from end of tube. 3/16 wall thickness..

There is a box which you can store and convenient to carry.
It is convenient and quick to convert and inch threaded holes with wire threaded inserts..
In the event of a threading error or repair of a damaged female threaded hole, a threaded insert can be used as a means of repair to provide a cost-effective recovery of the screw hole..
The wire threaded insert set are placed in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-accuracy female thread..
High quality stainless steel material can make sure the durability and stability of the product.