HighFree 13PCS Boring Head, Boring Bar CNC Milling Tools, 2 inch R8 Shank Holder Boring Head Tool for The Milling Machine
- Qualified for precise tool alignment and squareness.
ReviewsSquareness Cabinet
DBM IMPORTS Pair of Ultra Precision 123 1 2 3 Block 23 Holes Drilling Milling Tool
- 5 holes tapped to 3/8-16 and others untapped.
- Accessories: 5 stainless steel socket head cap screws.
3 x 2.95' Precision Mill Vise Anti-Jaw Lifting W/Swivel Base Fit for Milling Shaping and Drilling Machines
- Accurate to 0.002? per 4? on squareness and 0.006? per 4? on parallelism without base.
- Vise Key: 11.11mm table slot width, 12.00mm base width.
6 x 7-1/2' Precision Mill Vise Lengthen Anti-Jaw Lifting W/Swivel Base Fit for Milling Shaping and Drilling Machines
- Accurate to 0.002" per 4" on squareness and 0.006" per 4" on parallelism without base.
- Vise Key: 15.875mm table slot width, 18.00mm base width.
BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks
- Heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of block.
- Accuracy and squareness on all sides within .0001"-.0002".
- 23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes Cross drilling design allows for efficient use of lower weight with maximum strength, Dimensions- 1" x 2" x 3", 2.1 lbs. weight.
New 1 x 2 x 3 Inch Blocks No Holes Matched Pair Hardened Steel Plain (1'x2'x3') 123 Set Precision Machinist Milling
- Dimensions- 1" x 2" x 3", 3.5 lbs. weight.
- Accuracy and squareness on all sides within .0001"-.0002".
- Made of precision-grade tool steel hardened and ground on all 6 sides of block.
- Heat treated and case hardened to HRC 57-62.
DBM IMPORTS High Precision 8 Jaw Wire Cut EDM Vise HRC 55 .0002 Toolmaker Stainless Steel Hardened Grinding Milling
- Stainless Steel High Precision 8" Wire Cut Vise.
- Parellelism and squareness within .0002".
- Precision ground and hardened throughout.
- Made of stainless steel to resist erosion.
- Case Overall dimension: 13-1/2''L x 6''W x 3''H.
Machinist Engineer Solid Mini Square 2-1/2 x 1-1/2 x .220 Inches Thick DIN 875/0 Square w/in - 0.0003 Inches Stainless TTWSS2
- Machined from a solid blank of stainless steel (will never rust or go out of square).
- DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”.
- Wide enough to stand on its edge on its own.
2-4-6 Blocks Matched Pair (2 Each), Hardened Steel RC 55-62, 23 Holes (2x4x6 Inches) 246 Precision Ground Machinist Set Up Blocks
- Includes matched pair 2-4-6 blocks includes 2 blocks.
- Made of precision-grade tool steel hardened and precise ground on all 6 sides of block, heat treated and case hardened to HRC 57-62.
- Accuracy with squareness on all sides within .0002 per inch.
- Cross drilling design gives minimum weight and maximum strength.
- 23 holes consists of 5 tapped holes that are 5/8-11 for clamping and Holes - 18 untapped holes.
Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes
- Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
- Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
- Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
- Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
- One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Yellowhammer Ultra Precision Matched Pair 1-2-3 Setup Blocks with Bolts Hex Wrench and Protective Case – Perfect for Machinists Metalworkers Woodworkers and Many Other Applications
- SET INCLUDES: matched pair (2x) 1-2-3 blocks, 5x 3/8"x16TPI bolts with hex wrench, and protective plastic case..
- Precision ground on all six sides with dimensions within +/- 0.0001", parallelism and flatness within .0001", and squareness within .0003".
- Each block is equipped with 23 cross-drilled holes 5 threaded to accept 3/8"x16 bolts (included) and 18 non-threaded holes, for easy and accurate work....
- Perfect for machinists, metalworkers, woodworkers, and many other applications..
- Includes fitted protective case for easy storage and transport..