DBM IMPORTS Pair of Ultra Precision 123 1 2 3 Block 23 Holes Drilling Milling Tool
- 5 holes tapped to 3/8-16 and others untapped.
- Accessories: 5 stainless steel socket head cap screws.
ReviewsSquareness Windows
3 x 2.95' Precision Mill Vise Anti-Jaw Lifting W/Swivel Base Fit for Milling Shaping and Drilling Machines
- Accurate to 0.002? per 4? on squareness and 0.006? per 4? on parallelism without base.
- Vise Key: 11.11mm table slot width, 12.00mm base width.
6 x 7-1/2' Precision Mill Vise Lengthen Anti-Jaw Lifting W/Swivel Base Fit for Milling Shaping and Drilling Machines
- Accurate to 0.002" per 4" on squareness and 0.006" per 4" on parallelism without base.
- Vise Key: 15.875mm table slot width, 18.00mm base width.
BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks
- Heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of block.
- Accuracy and squareness on all sides within .0001"-.0002".
- 23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes Cross drilling design allows for efficient use of lower weight with maximum strength, Dimensions- 1" x 2" x 3", 2.1 lbs. weight.
New 1 x 2 x 3 Inch Blocks No Holes Matched Pair Hardened Steel Plain (1'x2'x3') 123 Set Precision Machinist Milling
- Dimensions- 1" x 2" x 3", 3.5 lbs. weight.
- Accuracy and squareness on all sides within .0001"-.0002".
- Made of precision-grade tool steel hardened and ground on all 6 sides of block.
- Heat treated and case hardened to HRC 57-62.
DBM IMPORTS High Precision 8 Jaw Wire Cut EDM Vise HRC 55 .0002 Toolmaker Stainless Steel Hardened Grinding Milling
- Stainless Steel High Precision 8" Wire Cut Vise.
- Parellelism and squareness within .0002".
- Precision ground and hardened throughout.
- Made of stainless steel to resist erosion.
- Case Overall dimension: 13-1/2''L x 6''W x 3''H.
Machinist Engineer Solid Mini Square 2-1/2 x 1-1/2 x .220 Inches Thick DIN 875/0 Square w/in - 0.0003 Inches Stainless TTWSS2
- Machined from a solid blank of stainless steel (will never rust or go out of square).
- DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”.
- Wide enough to stand on its edge on its own.
2-4-6 Blocks Matched Pair (2 Each), Hardened Steel RC 55-62, 23 Holes (2x4x6 Inches) 246 Precision Ground Machinist Set Up Blocks
- Includes matched pair 2-4-6 blocks includes 2 blocks.
- Made of precision-grade tool steel hardened and precise ground on all 6 sides of block, heat treated and case hardened to HRC 57-62.
- Accuracy with squareness on all sides within .0002 per inch.
- Cross drilling design gives minimum weight and maximum strength.
- 23 holes consists of 5 tapped holes that are 5/8-11 for clamping and Holes - 18 untapped holes.
Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes
- Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
- Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
- Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
- Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
- One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Jorgensen Cabinet Master 24-inch 90° Parallel Jaw Bar Clamp, 2-pack…
- Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel..
- Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp..
- Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle..
- Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading..
- This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure..
Yellowhammer Ultra Precision Matched Pair 1-2-3 Setup Blocks with Bolts Hex Wrench and Protective Case – Perfect for Machinists Metalworkers Woodworkers and Many Other Applications
- SET INCLUDES: matched pair (2x) 1-2-3 blocks, 5x 3/8"x16TPI bolts with hex wrench, and protective plastic case..
- Precision ground on all six sides with dimensions within +/- 0.0001", parallelism and flatness within .0001", and squareness within .0003".
- Each block is equipped with 23 cross-drilled holes 5 threaded to accept 3/8"x16 bolts (included) and 18 non-threaded holes, for easy and accurate work....
- Perfect for machinists, metalworkers, woodworkers, and many other applications..
- Includes fitted protective case for easy storage and transport..