ReviewsSs Closed Body Turnbuckle

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

CCC, French Press 5 Part Stainless Steel 3.75 Inch Wide Plunger Assembly For Flat Top 34 oz 8-Cup 1 Liter Coffee Press Replacement Part

  • [COMPATIBLE TO USE WITH YOUR FLAT SHAPE LID] 5 PARTS, Cross, Filter & Spiral Plates, 7.00” Plunger Rod & Closed Nut & Solid Top Knob-Everything needed for a French press plunger to use with your lid.
  • Fits a 3.75" wide carafe with your domed lid perfectly and will do a great job filtering your coffee..
  • [REPLACEMENT FRENCH PRESS PARTS] “I am ridiculously happy with this!” Customer Siri said it worked on a 15-year-old Stainless Steel French Press.
  • WANT HELP? ASK A QUESTION: CLICK THE "New Value Group" above the orange "Add to Cart" button to email us through Amazon.
  • [REPLACEMENT PLUNGER SET] with 7” rod for BODUM’s flat top Brazil models, Veken, Mueller, Secura, Café Du Chateau, Coffee Gator, Clever Chef, Utopia Kitchen & other flat lidded "8-Espresso Cup" 32|34oz French Press coffee makers.
  • Not OEM Bodum, Compatibly Manufactured by CCC for flat lidded 1 Liter French Press Coffee Makers.
  • [DIRECTIONS FOR USE] Take apart your old plunger & thread the rod into the hole on you flat lid.
  • Carefully start the finely threaded nut with rounded opening on top – if it gets “cross threaded” it will get stripped.
  • spiral plate first, mesh filter sandwiched with cross plate below & thread the stem of the cross plate over the rods end, screw the closed nu....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

Muzata 20Pairs Cable Railing Kit 1/8' Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 20 Cable Lines CK07 NN1,CA4 CA5

  • Multi-Angled and Wide-Adjustment — This cable railing kit works for 1/8″ wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust freely from the max length of 10.1 inch to the min length of 6.8 inch. Package includes:20pcs turnbuckles, 20pcs terminals, 80pcs screws, 1pc bent wrench. This package can make 20 cable runs.
  • Clean Look and Durability — This cable railing hardware has a clean looking. It’s made of T316 stainless steel, which has excellent resistance to rust and seawater and is ideal for indoor and outdoor, even coastal applications. The maximum span between two end posts is 30Ft. For code compliance, post spacing is recommended to be 3-4 ft, and cable spacing 3 inch to pass the 4″ sphere test.
  • Easy to install — This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable range makes installation easier, especially for beginners, who might not cut the cable to the precise length. Apply for both wood posts and wood posts with sleeves.
  • Pre-Designed System — We pre-designed a WoodEasy cable railing system to help you construct a beginner-fri....
Check Stock

TooTaci Turnbuckle Wire Tensioner Strainer Kit with 100ft Stainless Steel Coated Wire Rope,1/16\ Steel Cable,Turnbuckles for Cables Wire,for Garden Wire,Picture Wire,Strings Light Hanging,Shade Sails

  • 【Turnbuckle and Cable Kit】-- Comes with 100ft/30M Stainless Steel Metal Cable Wire Rope 1/16 , 5× M5 Turnbuckle hook and eye.
  • 20× 1/16 Wire Rope Crimping Loop Sleeves ..
  • 【Stainless Steel Cable Wire Rope】-- 1/16 Vinyl Coated Wire Rope made of 304 stainless steel, This cable bare OD is 1.5mm，Coated OD is 2mm.
  • Stainless Steel Cable Wire Rope offer corrosion resistance, durability and strength rather than galvanized wire.
  • cable wire with 7x7 construction consisting of 7 groups of 7 strands braided together.
  • stainless steel cable wire provide longer service time on project..
  • 【Turnbuckles for Cables Wire 】-- Heavy Duty M5 Hook and Eye Turnbuckle Kit made of 304 stainless steel ,Aluminum Crimping Loop Sleeve made of Aluminum ,offers good corrosion resistance and rust resistance,stainless steel turn buckle/ tension hook and eye for tightening up cable & wire rope allow you to use in any weather and anywhere !.
  • 【 Easy To Use】:1/16 Stainless Steel Wire Rope requires cable cutters.
  • 1/16 Wire Rope Crimping Loop requires crimping tool to fasten and tighten wire.
  • and 1/16 wire rope thimbles prevent wire rope wears, extend the service time for project.and the turnbuckle is adjustable ,conne....
Check Stock

Muzata 32Pairs Cable Railing Kit 1/8" Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 32 Cable Lines CK07 NN1,CA4 CA5

  • Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust freely from the max length of 10.1 inch to the min length of 6.8 inch. Package includes:32pcs turnbuckles, 32pcs terminals, 130pcs screws,1pc cutter,1pc bent wrench.This package can make 32 cable runs.
  • Clean Look and Durability -- This cable railing hardware has a clean looking. It's made of T316 stainless steel, which has excellent resistance to rust and seawater and is ideal for indoor and outdoor, even coastal applications. The maximum span between two end posts is 30Ft. For code compliance, post spacing is recommended to be 3-4 ft, and cable spacing 3 inch to pass the 4" sphere test.
  • Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable range makes installation easier, especially for beginners, who might not cut the cable to the precise length. Apply for both wood posts and wood posts with sleeves.
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to help you construct a beginner-fri....
Check Stock

Indusco 93900241 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 5/8\ Threaded Diameter x 6\ Take Up, 15-1/2\ Length

  • Hot dipped galvanized hex turnbuckle body with clevis jaws at each end to provide full wrench bearings.
  • Stainless steel turnbuckles with design and performance requirements of ASTM F 1145 Class G.
  • Strong steel turnbuckle having working load limit based on a design factor of 5:1.
  • Can also be used for recreational activities like zip lining.
  • Turnbuckles must always be inspected for wear, distortion, cracks and damage before use.
  • Loading must be applied in a straight line and not angular.
Check Stock

Indusco 93900296 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 5/8\ Threaded Diameter x 12\ Take Up, 21-1/2\ Length

  • Hot dipped galvanized hex turnbuckle body with clevis jaws at each end to provide full wrench bearings.
  • Stainless steel turnbuckles with design and performance requirements of ASTM F 1145 Class G.
  • Strong steel turnbuckle having working load limit based on a design factor of 5:1.
  • Can also be used for recreational activities like zip lining.
  • Turnbuckles must always be inspected for wear, distortion, cracks and damage before use.
  • Loading must be applied in a straight line and not angular.
Check Stock

AD Beads 1440 Pieces Mixed Size Glue on Quality Glass Flatback Rhinestones Round Crystal Gems ( 05 Aquamarine )

  • ...n't need any extra tool except one tube glue. Push out a rice amount glue from the needle point tube to the area which you want to have rhinestone. Don't move until it's dry..
  • Mixed Size: Our high end Crystal glass Rhinestone is the best result to Glue on surface of any bag,custom dress or clothes, cellphone's case, body arts, Nail arts, shoes arts, and any decorations.SS3 (1.3-1.4mm), SS4 (1.5-1.6mm), SS5 (1.7-1.8mm), SS6 (1.9-2.0mm), SS8 (2.3-2.4mm), SS10 (2.7-2.8mm), SS12 (3.0-3.2mm), SS16 (3.8-4.0mm), SS20 (4.6-4.8mm), & SS30 (6.2-6.5mm).
  • We do our best to keep in touch during the transaction.If you are not completely satisfied with your purchase experience ,we want to hear from you. We will strive to provide a response within 12 hours of receiving your questions.
Check Stock

AD Beads 1440 Pieces Mixed Size No Hotfix Glue on Quality Glass Flatback Rhinestones Round Crystal Gems (22 Lt. Rose)

  • ...ce amount glue from the needle point tube to the area which you want to have rhinestone. Don't move until it's dry..
  • Mixed Size: Our high end Crystal glass Rhinestone is the best result to Glue on surface of any bag,custom dress or clothes, cellphone's case, body arts, Nail arts, shoes arts, and any decorations.SS3 (1.3-1.4mm), SS4 (1.5-1.6mm), SS5 (1.7-1.8mm), SS6 (1.9-2.0mm), SS8 (2.3-2.4mm), SS10 (2.7-2.8mm), SS12 (3.0-3.2mm), SS16 (3.8-4.0mm), SS20 (4.6-4.8mm), & SS30 (6.2-6.5mm).
  • We do our best to keep in touch during the transaction.If you are not completely satisfied with your purchase experience ,we want to hear from you. We will strive to provide a response within 12 hours of receiving your questions.
Check Stock