ReviewsSsd Mounting Bracket

2230 2280 M.2 SSD Hard Drive Mounting Metal Bracket for Dell G15 5510 5511 5515 5520 5521 5525, G15 Ryzen Edition, G7 7700, inspiron 5401 5405 3590 5505 5590 5591 Series Laptop P/N: PXNWV

Compatible with Dell G15 5510 5511 5515 5520 5521 5525, G15 Ryzen Edition, G7 17 7700 , inspiron 14 (5400/5401/5402/5405/5406/5408/5409/7405), Inspiron 15 (5501/5502/5505/5508/5509) and Vostro 14 (5401/5402) & Vostro 15 (5501/5502) Series Laptop.
Add a extra M.2 SSD to your Dell Inspiron or Vostro Series laptop.
Package Include: 1x M.2 SSD Mounting Bracket with screw..

NVMe PCIe Adapter Apply to 2280/2260/2242/2230mm M.2 NVMe and AHCI SSD, Adapter with Aluminum Heatsink Solution..
M.2 PCIe Adapter Supports PCI-Express X4, X8, X16 slots. PCIe 4.0 lanes with up to 64Gbps bandwidth, backward compatible with PCIe 1.0 2.0 3.0, Full release the speed of PCIE 3.0/4.0 X4 Full Speed M.2 PCIe SSD, such as 64Gbps M.2 PCIe 4.0 SSD..
PCIe NVMe Adapter Supports Windows 11/10/8、Windows Server 2012 R2、Linux、Fedora、SUSE、Ubuntu、Red Hat（no driver required） NOTE: Go to NVMe SSD manufacture website for driver installation if your PC can not recognize NVMe SSD. Win7 and Windows Server 2008 R2 need additional driver for NVMe SSD..
PCIe NVMe 3.0/4.0 x4 Adapter with 2 thermal pads, You put one between the ssd and the carrier and one between the ssd and the heat sink..
Package Including: ➤1-M.2 PCIe Adapter x1.➤2-SSD Spare bolt（Pre-installed on PCB）.➤3-Low Profile Bracket x1.➤4-Screw Driver x1.➤5-Regular Profile Bracket x1.➤6-Heat conducting silica gel pad x2 （thick + thin）.➤7-Aluminum Heatsink x1.➤8-Heatsink fixing spring nails x2.➤9-PCB fixing screws x2.➤10-Bracket fixing screws x1..

...he top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
[RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port..
[15MM ROD SUPPORT] When Using Battery Grip Extension Bracket.An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup..

OPTIMAL FAN CONTROL: Power up to nine PWM fans and manage the fan speed profile via NZXT CAM..
FULLY-CUSTOMIZABLE RGB LIGHTING: Expand your RGB setup with six lighting channels and customize all of your compatible RGB accessories via NZXT CAM software..
CONVENIENT INSTALLATION: Install the controller easily using built-in magnets or the included adhesive strips. The controller also has 2.5 drive bay mounting screw holes to secure it to the SSD mounting bracket..

Supports PCIe Gen4 and PCIe Gen3 M.2 NGFF 80mm, 60mm, 42mm SSD.
Supports PCIe 1.0 ,PCIe 2.0,PCIe 3.0, and PCIe 4.0 motherboard.
Note: this adapter is only for 'M' key M.2 PCIe SSD such as Samsung XP941 SSD. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD..
Fast and hassle-free setup with native OS support / Includes full-profile bracket and low-profile bracket for installation in SFF computers.
Windows 10/8, Windows Server 2012 R2, Linux series, Fedora, SUSE, Ubuntu, Red Hat native drivers support both PCIe-NVMe and PCIe-AHCI. Note: Mac Pro 2009, 2010 and 2012 models support PCIe-AHCI SSD only. （Note: Win7 and Windows Server 2008 R2 are not compatible with NVME SSD).

Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..

Add the 2nd drive to your laptop by replacing your optical drive.
Notice: Universal SATA-to-SATA Optical bay Caddy Adapter Tray.
Need to remove buyer’s optical drive faceplate and mounting bracket / ejector latch to re-use onto the caddy for proper working!.
This device accepts 2.5″ inch 9.5mm / 7mm high or less SATA HDD / SSD.
Compatible with: for Acer Aspire E14 E15 E17 ES1-511-C50C ES1-512-P84G E5-411G E5-575G E5-771G.
Notice: Buyers need to remove their optical drive Front Panel(bezel) and Mounting Bracket to re-use onto the caddy for perfect match!!!.

Super small at only 2.8 liters or 3.7 liters (includes interchangeable top cover for altering case size).
Modular design creates different configurations to accommodate various components (9.5mm slim ODD, 3.5" HDD, 2.5" SSD, 120/140mm fan).
Includes VESA mounting plate for integration with monitors.

Heatsink Part Number(s): 3JTF8, 03JTF8, CN-03JTF8. 30-pin Cable D P/N: 2JH8P, 02JH8P, CN-02JH8P. 50-pin Cable D P/N: 5F1WR, 5F1WR, CN-05F1WR.
SATA interposer Board Part Number(s): D3P25, 0D3P25, CN-0D3P25, LS-J106P. HDD Bracket P/N: 0R24Y6, R24Y6, FDQ70_SSD_SLED_BRACKET_SUB_ASSY, AM2RE000400..
Each Pack come with 1x SATA interposer Board, 1x 2.5″ HDD Bracket, 2x M.2 2280 Heatsink, 1x 30-pin Cable, 1x 50-pin Cable, 8x Screws..
These parts to help you install the TWO M.2 SSD by 2.5″ HDD bay additional (SSD-3 & SSD-4 Slots)..
Compatible with Dell Alienware Area-51m R2 series ONLY..