ReviewsStabilizer Feet

Superfeet CARBON, Thin and Strong Insoles for Pain Relief in Performance Athletic and Tight Casual Shoes, Unisex, Gray

  • FIT PROFILE: Low volume / Low profile (Volume refers to the amount of space the insole will take up in your shoe. Profile is how much shape you can expect to feel under your foot).
  • CARBON FIBER STABILIZER CAP: the stabilizer cap is reinforced with EVOLYTE, a proprietary carbon fiber & polymer blend, to provide structure and support.
  • LOW-PROFILE DESIGN: the thinnest Superfeet insole.
  • HEEL CUP: the structured heel cup helps stabilize and support the foot and positions the heel to naturally absorb impact.
  • SUPERFEET SHAPE: the low-profile shape helps stabilize and support the foot, which can help reduce stress on feet, ankles and knees.
Check Stock

Pexintek Ankle Brace for Women & Men, Adjustable Active Ankle Support with Fixed Splints on Both Sides Prevent Ankle Sprain,Suitable for Left and Right Feet,Large Size, black

  • [Strong support] This Ankle Stabilizer Brace has the sole and both sides of the ankle to fix the ankle in three directions, and there are strong splints on both sides to strengthen the protection, which can effectively prevent the ankle from tilting and spraining during exercise. It can also be used in the process of ankle recovery. Prevent injury again..
  • [Adjustable design] Designed according to the physiological curve of the foot, the bottom and both sides are fixed by adjustable Velcro, which can adjust the tightness of the sole and sides of the foot according to individual conditions, making it more comfortable to wear..
  • [Provide support in various sports] This Ankle Stabilizer Brace is very cool in shape design, Sports Brace for Basketball, Soccer, Hockey, Volleyball, Football & Baseball..
  • [Applicable to both left and right feet] The universal design of left and right feet can provide strong protection to the ankle. Suitable for people with large size shoes.
  • [100% Satisfaction Guarantee] If you have any questions about this product, just tell us, we guarantee that you will get a satisfactory result..
Check Stock

Natural Foot Orthotics Slim Stabilizer, for Low to Flat Arches Specifically Designed for Plantar Fasciitis. Arch Support Shoe Insoles/Inserts Good for Feet, Leg, Back, Heel & Joint Pain Made in USA

  • AVOID SURGICAL PROCEDURES, SHOTS AND MEDICATIONS - Thousands of satisfied users have already reported 100% relief from plantar fasciitis, heel / forefoot / joint and lower back pain. The Stabilizer Slim insole supports all 4 arches of each foot taking pressure off the plantar fasciia, this starts an effective healing process for a fraction of the $400+ price you will see from others..
  • BREAK IN PERIOD - The break-in period can take up to 2-3 weeks. Day 1 wear the slim stabilizer for no more than 2 hr. Day 2 wear the slim stabilizer for 4 hrs. Day 3 wear for 5 to 6 hrs. And each day add an hour until you can wear them comfortably..
  • INSTANT PAIN RELIEF CUSTOMIZED SPECIFICALLY FOR YOU - Orthotic available in mens and womens shoe sizes to ensure the most comfortable experience possible.
  • no general size or trimming length to fit. Easy to follow break-in instructions TO customize your orthopaedic sole to your body’s needs for a lifetime. Wear in your running shoes boot dress shoes and all types of heels. Specifically for low to medium arches and flat feet (overpronation)..
  • SUPERIOR MATERIALS PRODUCED IN USA - Made from semi-rigid Ethyl Vinyl Acetate (EVA) plastic which provides the ideal firmness for best results and permanent pain relief. Avoid cheaper sole....
Check Stock

Superfeet CARBON - Carbon Fiber & Foam Insoles for Tight Athletic Shoes - 7.5-9 Men / 8.5-10 Women

  • Fit Profile: Low profile/Low volume insoles.
  • Volume refers to the amount of space these comfortable Superfeet insoles will take up in your shoe, whereas, the profile is how much shape you can expect to feel under your foot. Full-length Superfeet insoles are supposed to be trimmed to fit in your shoes..
  • Carbon Fiber Stabilizer Cap: The stabilizer cap of these Superfeet shoe sole inserts is reinforced with EVOLYTE, a proprietary carbon fiber & polymer blend, to provide structure and support.
  • Low-Profile Design: These Superfeet sole inserts are the thinnest of their type.
  • Heel Cup: The structured heel cup of these slim shoe insoles help stabilize and support the foot and positions the heel to naturally absorb impact.
  • Superfeet Shape: The low profile shape of the Superfeet shoe insert helps stabilize and support the foot, which can help reduce stress on feet, ankles, and knees.
Check Stock

Simthread Fusible No Show Mesh Cut Away Stabilizer Backing Interlining for Embroidery and Sewing - Weight 1.9 Ounces 12' x 10 Yards/Roll

  • ★ Simthread Fusible No Show Mesh Cut Away Stabilizer - Thanks to its semitransparent and soft texture, no show mesh stabilizer sheet is a good choice for light-colored and soft woven fabric.
  • ★ Fusible Embroidery Stabilizer Specification - 12" x 10 Yard, come in a roll-type packaging which makes it easy for you to cut sheets depending on your requirements..
  • ★ 100% Nylon Material - The invisible embroidery stabilizer backing is made of strong nylon spun polymesh material that provides permanent stable backing for embroidery projects, and helps the stabilizer withstand repeated washing and wearing..
  • ★ Safe and Soft on Skin - The stabilizer sheet is acid-free and lead-free.
  • the soft spun polymesh material protects your skin from rubbing on the rough thread parts at the back of an embroidery design. No more irritable and uncomfortable feeling when wearing embroidered shirt!.
  • ★ How to Use - Simply iron on the stabilizer to the fabric, cut the invisible embroidery stabilizer into a size as you want, hoop it together with the fabric, then stitch.
  • cut away and clean the stabilizer around the stitches after finishing your project. And also, it can be used to embroider patches by hooping only two cross layers of the stabilizer together with no fabric..
Check Stock

PCB Mount Stabilizers,Velocifire PCB Screw-in Stabilizers Mechanical Keyboard Stabilizers PC Material Satellite Switch 7u 6.25u 2u for Mechanical Keyboard(Smokey Grey)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock

PCB Mount Stabilizers,Velocifire Keyboard Stabilizers PCB Mount Screw-in Stabilizer Mechanical Keyboard Gold Plated Stabilizer 7u 6.25u 2u for DIY Mechanical Keyboard(Transparent)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock

No Show Mesh Machine Embroidery Stabilizer Backing 12' x 50 Yd/roll - Seneme Light Weight 1.8 oz Poly Mesh Cut Away Stabilizer for Machine Embroidery, Hand Sewing, Hoop & Stitch

  • √High Quality Stabilizer: This no show mesh cutaway stabilizer is 100% nylon spun polymesh which is a non-toxic material. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. The strong material helps the stabilizer withstand repeated washing and wearing..
  • √100% Safe on Skin: The stabilizer sheet is acid-free and lead-free.
  • the soft spun polymesh material protects your skin from rubbing on the rough thread parts at the back of an embroidery design. No more irritable and uncomfortable feeling when wearing embroidered shirt!.
  • √Easy to Use: Cut the embroidery stabilizer into a size as you want, hoop it together with the fabric, then stitch.
  • cut away and clean the stabilizer around the stitches after finishing your project..
  • √Versatile Support: Using a stabilizer for machine embroidery projects delivers flawless results. It works best with light-colored and soft cloth and those with natural fibers. It is perfect for chest logos, infant items, pique knits, T Shirts, Polo shirts, micro fiber apparel, silk and satin and so much more..
  • √Embroidery Stabilizer Specification: 12" x 50 Yard/roll - type packaging which makes it ....
Check Stock

JABASIC Women Hiking Shoes Breathable Mesh Athletic Outdoor Sneakers Grey/Purple,7

  • ➤Breathable:Soft Knit Mesh Upper Design,Protective Cap And Heel Stabilizer,Always Keep Your Feet Dry And Comfortable..
  • ➤Slip-resistant:Rubber Outsole With Anti-skid TPR Patch Design Provides Traction And Conforming To Human Body Motion..
  • ➤Anti-Collision: TPU Rubber Toe Cap Has Good Pressure Resistance And Reduces External Damage..
  • ➤Lady Hiking Shoes With Lace Up Design For A Comfortable And Secure Fit,Easy To Adjustment For Your Feet..
  • ➤Occasions:Jabasic Women Shoes Suitable For Daily,Shopping, Walking,Travel,Hiking,Climbing,Camping And So On..
Check Stock

Bunsen Burner, Natural Gas - Flame Stabilizer, Air Flow Adjustable - Cast Iron StabiliBase, Anti-Tip Design with Handle - Suitable for use with Natural Gas - Eisco Labs

  • SIMPLE DESIGN || This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed to have the gas flow controlled via the valve at the gas output, not at the burner. Simple, easy to use burner jetted for natural gas.
  • FOR NATURAL GAS || Suitable for use with natural gas. Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing.
  • CAST IRON BASE || This improved design has an extended cast Iron base (4.25" x 4.25") that prevents tipping, even when hoses are connected. Burner feet are spaced at all four corners for added stability and allows burner to fit comfortably under stands. Burner equipped with a sturdy "Candle stick holder" handle. This safety feature is casted into the base to allow user to move burner without getting harmed.
  • FLAME STABILIZER & AIR FLOW ADJUSTABLE || Burner features an air flow sleeve, allowing you to adjust the amount of oxygen drawn into the tube. Additionally, this design features a brass flame stabilizer that is fixed to the burner tube.
  • MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highes....
Check Stock

JABASIC Women Hiking Shoes Breathable Mesh Athletic Outdoor Sneakers (Grey/Purple,9)

  • ➤Breathable:Soft Knit Mesh Upper Design,Protective Cap And Heel Stabilizer,Always Keep Your Feet Dry And Comfortable..
  • ➤Slip-resistant:EVA Outsole With Anti-skid TPR Patch Design Provides Traction And Conforming To Human Body Motion..
  • ➤Anti-Collision: TPU Rubber Toe Cap Has Good Pressure Resistance And Reduces External Damage..
  • ➤Lady Hiking Shoes With Lace Up Design For A Comfortable And Secure Fit,Easy To Adjustment For Your Feet..
  • ➤Occasions:Jabasic Women Shoes Suitable For Daily,Shopping, Walking,Travel,Hiking,Climbing,Camping,Trekking,And So On..
Check Stock