ReviewsStabilizing Arm Trailer Jacks

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...nd natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you....
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • ...l disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • ...l disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...l disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
Check Stock

SteadyFast Made in USA, Stabilizer System for 5th Wheel, Travel and Camper Trailers Without Auto Leveling - 4 Foot Plates- Item B

  • Stabilize your Trailer in less than 60 Seconds. Made in USA System Stabilizes Parked Travel, Camper, or Fifth Wheel Trailer.
  • Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates plus two additional so all jack footplates will match..
  • Installs Permanently so there is nothing to setup or store. Approximately 2-3 hour install...
  • Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. If you have an Auto Leveling system Please check out our Item C..
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks.
Check Stock

Camco 44545 Heavy-Duty Extra-Large Stabilizer Jack Pads with Handle - Prevent Trailer Jacks from Slipping Into Soft Ground - Includes (2) Jack Pads , YELLOW

  • Prevents Jacks from Sinking: Helps prevent jacks from sinking into soft ground.
  • Can be used with stabilizing jacks and scissor jacks.
  • Features: Rope handles for easy carrying.
  • Measurements: 17-inches x 15-inches x 1-inch.
  • Durable Construction: Constructed of a heavy-duty polymer.
  • Made in the USA: Product is made in the USA.
Check Stock

SteadyFast Stabilizer for 5th Wheels, Travel, and Camper Trailers Without Auto Leveling - 2 Foot Plates- Item A

  • Best Performing Stabilizer System, ONLY 60 SECONDS to SETUP, No need to crawl under trailer, No Storage Space Needed, Made in USA,.
  • Only Available in Dark Grey. Permanently installed in 2-3 hours..
  • Works on 5th Wheels and Travel Trailers with existing stabilizer jacks. If your trailer has an auto leveling system Please order our Item C...
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks or any other parked trailer stabilizers.
Check Stock

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
  • The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Check Stock

Bulldog 500245 Black Universal 6" Trailer Jack Poly Wheel Caster with Pin (1200 lbs. Capacity)

  • For use with Bulldog round tube trailer jacks or wherever a removable caster that fits 2 inch diameter tubing is required.
  • Fits Bulldog trailer jacks rated from 2,000 lbs. to 5,000 lbs..
  • Heavy duty poly wheel with zinc finished, steel swivel mount components.
Check Stock

Red Hound Auto 4 Telescoping Folding Trailer Stabilizer Jacks Swing Down 1000 Lbs Support Capacity Each for RV Trailer Camper Includes Handle and Mounting Screws

  • Includes 4 Red Hound Auto telescoping stabilizer jacks, 1 adjustment rod handle, mounting hardware and level (easy to read, detailed instructions included).
  • Each stabilizing jack can hold up to 650 lbs. lift capacity or 1,000 lbs. support capacity if used properly.
  • Perfect for utility trailers, pop-up campers, motorcycle trailers, cargo trailers, concession stands and more.
  • Conveniently folds up for travel and folds down for use.
  • Adjustable telescoping function establishes ideal heightEach stabilizing jack can hold up to 650 lbs. lift capacity or 1,000 lbs. support capacity if used properly.
  • Constructed of premium, weather resistant, industrial grade material that is powder coated for rust protection.
  • Deluxe Kit includes 4 jacks, adjustment jack rod handle and eight 3/8" self-tapping mounting screws.
Check Stock

Andersen Hitches Ultimate Trailer Gear EZ Block Bag 3603

  • Each Ultimate Trailer Gear EZ Block Bag includes the following: 1 EZ Block, 1 Camper Leveler with 1 TUFF Chock, 1 Extra TUFF Chock, 4 TUFF Pads, 1....
  • This 10 piece kit is the perfect accessory set for single axle trailers.
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away... and less dirt....
  • The Andersen EZ Block is an extremely strong and durable jack block that is perfect for all bumper-tow trailers. It works with scissor jacks, post....
  • EZ Blocks feature a recessed post hole that helps prevent post jacks from slipping. The EZ Block is designed to resist dirt and oil.
Check Stock