ReviewsStages Power Meter Cannondale Si

3 Phase Power Meter DTM024 Digital LCD Display Energy Meter Electric Kilowatt Hour Meter, 220/380V 5-80A

WITH TRANSPARENT SHELL-- This power meter adopts transparent shell, which is convenient to observe the operation status of electronic components inside the meter..
LCD DISPLAY WITH BACKLIGHT-- This energy meter is equipped with LCD backlight display is used to read data clearly, convenient to operate..
LOW POWER CONSUMPTION-- The power consumption of the product is very low, saving money. The theoretical power consumption is less than or equal to 2 W..
HIGH STABILITY-- The kilowatt hour meter has stable performance and can run steadily in the range of -20-55 degrees Celsius..
APPLICATION-- 3 phase electric power meter can be widely used in power metering systems, standard: IEC62052-11 IEC62053-21..

The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
It has a 4-pin interface that can communicate directly with the analog pins.
It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..

... 15-n269si 15-n205ss 15-n228ss 15-n229ss 15- n230ss 15-n253es 15-n260ss 15-n262ss 15-n263es 15-n264ss 15-n265ss 15-n266ss 15-n204es 15-n200ss15-n201ss 15- n220ss 15-n251ss 15-n252ss 15-n258ss 15-n261ss 15-n261ss.
Over-temperature and Short-circuit Protection.
Warranty :We specialize in providing quality power products from factory direct sales and quality customer service.Full Refund within 60 days.Satisfaction guaranteed and backed by 12 months replacement warranty for free and 24 x 7 email support..
Up to 500 recharge cycles over the life of the battery..

The MHX HS is a transducer mounting hardware kit for XHS model transducers.
Compatible with: XHS 9 HDSI 180 T, HELIX 12 CHIRP SI GPS, HELIX 10 SI GPS, HELIX 9 SI GPS, 1199ci SI GPS, 999ci SI GPS, 1198c SI GPS, 998c SI GPS.
Designed specifically to be used in a marine environment.
Includes hardware for mounting XNT transducers and product manual.
Works with XNT 9 20, XNT 9 20 T, XNT 9 QB 90 T, XNT 9 QB 90, XNT 9 SI 180 T.

【 Monitoring Electric Usage and Know Cost Intuitively 】 Power consumption meter can measure power (W), volts, amps, frequency, power factor, maximum and minimum power (W), cumulative time and energy (kWh), and calculate cost automatically after price-setting.
monitoring home energy usage and help you to save electricity cost.
【 Large Clear LCD Display with Backlight 】 Electricity monitor kilowatt meter has a wide view angle and clear-digit display.
easy to read and operate the electricity monitor in dark areas with the backlit clear LCD display.
【 Long Time Data Hold Memory Function 】 Come with built-in rechargeable battery backup, the watt meter power analyzer can hold data up to 90 days when coming across a power outage or plugging out the meter from the outlet.
all data includes the cost setting will go to zero once press the reset button.
【 Potable and Takes up 1 Outlet Only 】 Compact size.
power meter socket plug leaves the lower wall outlet available when plugging into the upper outlet.
made of high-quality fire-resistant material.
friendly after-sale customer service and 1-year limited warranty.
Note: do not compatible with AC inverter and solar power inverter.
【 3680W Overload Indication 】 This power monitor meter can measure ....

Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector.
Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power.
Measures 1-Phase/ balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh),plus Power Factor/ Phase Angle.
Large dual backlit LCD display (9999 count) with bargraph.

Compatible with: All APEX models, SOLIX 10 SI, SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 10 CHIRP MEGA SI+ G3, SOLIX 12 SI, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX SI, SOLIX 15 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G3..
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz.
Dual Spectrum CHIRP Max Depth: 1200ft (365m).
MEGA Side Imaging Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (122m).

ESSENTIAL KIT: This tool kit provides everything you need to provide a stable light source and measure the relative optical power of fiber optic cables.
POWER METER (FPM-50A): Measure single-mode wavelengths from 800-1650 nm with relative power ranging from -50 to +26 dBm.
LIGHT SOURCE (FLS-50): Provides a stable light source at 1310 nm or 1550 nm wavelengths for the optical power meter.
INCLUDED ADAPTERS: Includes FC, SC, and LC adapters for both power meter and light source for PC/UPC connectorized cables.
INCLUDES: FPM-50A Power Meter, FLS-50 Optical Light Source, and H-22 Carrying Bag with Straps.

BIKE POWER METER WITH ALL CRITICAL FEATURES CYCLISTS WANT: provides “gold-standard”, both-leg power measurement, using patented technology that has been tested and proven with some of the top pro teams in the world.
COMPATIBILITY: PowerPod V3 Cycling Power Meter works with any ANT+ bike computer, with most non-ANT+ bike computers, such as Polar and Suunto, with bike computer apps on your iOS/Android smartphone.
SIMPLIFIED AND FASTER POWER METER SETUP: box to bike setup in 10 minutes.
PowerPod is the only power meter that ATTACHES TO YOUR HANDLEBAR – no need to change or modify your crank, wheel, pedals, or bottom bracket.
SIMPLE TO USE: the power meter has just one button and one “status light”. You can use Velocomp’s free Isaac software for PC/Mac, to view detailed power, wind speed, bike speed, elevation, slope, and more.
BIKE-TO-BIKE PORTABILITY: PowerPod V3 moves effortlessly from bike-to-bike. Attach it to the bike you’re riding today,it automatically detects which bike you’re riding, and readjusts its internal settings for best performance.

Soft spandex mesh for excellent stretch, moisture management and breathability.
Use this to line your favorite pair of casual shorts for added comfort on the bike.