ReviewsStainless Exhaust Header

LEDAUT 2"x 100'Titanium Exhaust Heat Wrap For Car & Motorcycle Exhaust Tape With Stainless Ties

2"X 100' titanium exhaust wrap with 16 x 11.8" stainless steel(304) locking ties..
Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
Heat shield are highly resist to abrasions, oil spills, temperatures and vibration breakdown..
The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
The thermal heat wrap reduces heat under hood up to 50% and improve car and motorcycle performance.

1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Condition:100% Brand New AFTERMARKET PARTS,Qty.: 1 x Set Exhuast Fipe (Header & Mid ).
Material: Stainless Steel,Color: Polished,Designed to replaces the stock pipe and increase the power performance.
Full stainless steel made exhaust header mid or link pipes.
Joint is designed to fit all 51mm slip-on type mufflers.
Includes necessary mounting hardwares,Easy to install,no instruction.

Compatible For Honda MSX125 Grom 2013 2014 2015 2016 2017 2018 (fit for under seat exhaust, if you want right side exhaust, please contact us.).
Made of high quality stainless steel , exquisite workmanship and fashionable design, will enhance the look of your motorcycle..
Easy to install, without instructions. with baffle Sounds low , Removed baffle souds loud. Install according to personal needs..
Package included: 1x Exhaust header, 1x Muffler, 1x Clamp, 1xScrew,2xSprings, 2x weld ears.
If you have any question with your purchase, please contact us directly. Thanks.

【Stainless Steel】 The exhaust middle link pipe is made of premium stainless steel construction , high temperature resistant and anti-corrosion, wear resistance, certain hardness, certain impact resistance and durable,superior longevity, good design make the your motorcycle more stable,less shaking, less collision damaged,perfect material can extend the using life of your motor exhaust system..
【Attractive Performance】The motor exhaust front pipe is 100% brand new by professional manufactury ,it has good performance in reducing the exhaust noise and temperature,due to the perfect design, the pipe can make your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance, you can directly replace your old or broken one without worry..
【Special Fitment】The exhaust front pipe is designed for the Kawasaki Z900 2017-2018 ,this exhaust header is designed Fordrivers who need the highest performance of motorcycles, fashion design style, a great accessory to dress up your rides.
【Easy to Install】This front middle pipes kit are easy to install, no modification, cutting or drilling, and are not easy to fall off. It can be easily replaced without soldering. It is the best choice to replace the worn or da....

M4 Exhaust manufactures exhausts which add power and a more race-inspired sound to your bike as well as lowering the overall weight..
Extra time on research and development ensures your exhaust has the ultimate in quality workmanship, ease of installation, and the best performance possible for your motorcycle..
Street Slayer slip-on exhaust with a polished stainless steel, titanium or carbon fiber canister..
The Street Slayer slip-on exhaust system will shed some weight over stock to give your sport bike an improved power-to-weight ratio..
Bolt-on and slip-on systems utilize the stock header assembly, but remove the stock canister’s restrictions, for better sound and an increase in power..

M4 Exhaust manufactures exhausts which add power and a more race-inspired sound to your bike as well as lowering the overall weight..
Extra time on research and development ensures your exhaust has the ultimate in quality workmanship, ease of installation, and the best performance possible for your motorcycle..
Street Slayer slip-on exhaust with a polished stainless steel, titanium or carbon fiber canister..
The Street Slayer slip-on exhaust system will shed some weight over stock to give your sport bike an improved power-to-weight ratio..
Bolt-on and slip-on systems utilize the stock header assembly, but remove the stock canister’s restrictions, for better sound and an increase in power..

Custom header exhaust kit for use on Honda GX390 engines. Great start for those that want to construct their own exhaust system for generators, go karts, mini bikes. Kit includes mandrel bent 90 degree 1 1/4" tube with 3.5" radius, cnc cut 1/4" thick flange, and stainless steel replacement mounting hardware..

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.