ReviewsStainless Hose Clamp

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

Swpeet 100Pcs 8-44mm Adjustable Range Assorted Sizes Assortment Hose Clamps Kit, 100% 304 Stainless Steel Adjustable Range Worm Gear Hose Clamp Perfect for Plumbing, Automotive

  • 21-44mm:10Pcs. With a wrench in total 101Pcs. So many sizes are enough for daily needs. Clamp’s diameter can be adjusted according to a worm gear mechanism for precisely sealing pressure..
  • ♛ HIGH QUALITY ---- High quality 304 Stainless Steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The steel adopts hole technology makes its screw tightly bite the steel band.The hose clamp is sturdy, firm and reliable. No more worrying about rusting and cracking when installing on pipes..
  • ♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • ♛ WITH A WRENCH EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.Perfect to apply in such both indoor or outdoor situations as automotive, industrial, boat/ marine, shield, household and ....
Check Stock

YELUN Solid Brass Garden Hose Repair Connector with Clamps Hose End Repair Kit,Fit for 5/8"Garden Hose Fitting,Male and Female Hose Fittings (5/8"-3 Set)

  • The product contains 3 pcs male + 3 pcs female garden hose repair kit,6 pcs stainless tightening clamp, with 6 pcs free rubber gaskets.
  • Standard 5/8" US thread garden hose connection, and our size is 15.95mm(0.628 IN). The hose can be easily inserted and the stainless steel clamp is tightened without water leakage, work with your gaden hose, sprayers, nozzle, etc..
  • Sturdy material: these hose connectors are made of 58-3 brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage.
  • Note:1.Keep the water pipe incision flat.Tighten stainless clamps as tightly as possible to prevent leakage..
  • Good Service: If you have any problem with this product,feel free to email or call us.We will replace it or give your money back for any reason..
Check Stock

SANIFANNY Liquid Hand Sanitizer Dispenser - Easy-Access Lid for Convenient Application - Portable Design with Belt Clip and Lanyard Hook - Medical-Grade Rubber Made in Canada Parent Pink

  • DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in....
  • Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make....
  • Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof.....
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage.....
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a....
Check Stock

Cimeton 304 Stainless Steel Adjustable Clamp Worm Gear Hose Clamps (19Ft Strap + 12 Strong Fasteners)

  • [Material]: The strap with fasteners are made of 304 stainless steel, it is anti-rust and corrosion-resistant. Solid and sturdy material ensures that the adjustable worm gear hose clamp is durable for use and reusable..
  • [Smooth Worm Gear Clamp]: Our fastener steel is more thicker and keeps strapping strong and heavy duty. It is not easy to bend when tightening the hose clamp. We use the best quality screws to clamp the strap tightly when turning the screwdriver..
  • [Simple Operation]: It is easy to operate, you only need a pliers and a screwdriver. You can use pliers to repeatedly bend the strap up and down and the strap will be easily cut off. Then you can make an adjustable hose clamp according to your needs..
  • [Cost and Work Effective]: Our hose clamps make it much more cost effective and flexible than ordering a variety of worm clamps. You can make band hose clamps according to your need, such as 10 inch, 12 inch and so on. It also effectively solve the problem of hose leakage and air leakage..
  • [Wide Applications]: It can be widely applied in automotive, industrial, boat, shield, electronic or home applications. It is also perfect for your duct collection dryer vent ductwork, garden fence, segmented wood turning project, pole mount bracket, automotive, ....
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

  • Smooth Worm Gear Clamp: Our fastener steel is thicker than competitions, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!.
  • All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 201 SS, anti-rust and anti-salt, very suitable for outdoor use and coastal areas. The stainless steel hose clamps can be reusable after you release it again. Last forever! Separated fasteners can be purchased in our Amazon store..
Check Stock

Ripeng 200 Feet 40 Pieces Hoses Clamps, Worm Gear Clamps Stainless Steel Adjustable Duct Hose Large Clamp for Intercooler, Pipe, Plumbing, Tube and Fuel Line, 43 Inch

  • ...trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 2 piece adjustable hose clamp and 40 pieces fasteners, enough quantity to meet your different needs.
  • Suitable Size: the stainless steel duct clamp strap's total length is 100 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Reliable Material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water proof, corrosion resistant, strong, and long lasting use, which can be applied in outdoor and coastal areas.
  • Wide Range of Uses: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Convenient to Use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjus....
Check Stock

ZIPCCI Hose Clamp 25 Pack Stainless Steel Worm Gear fuel line hose clamps 16-25mm 5/8-1 inch

  • Package includes: 25 pieces 3/4 inch hose clamps..
  • Hose clamp clamping range from 16 to 25mm (5/8 to 1 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

5/16\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

  • Quality material: the entire hose clamp is made of quality 304 stainless steel, which is resistant to salt, rust, corrosion, water and oil.
  • Hose clamps with stainless steel material are firm and reliable, no need to worry about rusting and cracking when installed on pipes.
  • 10 Range sizes for options: these hose clamps are flexible and expandable with adjustable widths to fit 20 cm/ 7.87 inches hoses.
  • They include 10 steel hose clamps in different diameters to accommodate more hoses, and the fixture kit is flexible and easily extensible, with adjustable sizes ranging from 9 to 273 mm/ 0.35 to 10.75 inches.
  • Easy to install: the hose clamp is designed with a worm gear construction that adjusts its diameter to apply good sealing pressure.
  • It connects the hose so that the hose can be installed in a narrow space to prevent leakage.
  • These fixtures can also be applied for many times due to the 304 stainless steel material.
  • Wide application: the hose clamp could be firmly locked and applied to fasten hoses, pipes, cables, pipes, fuel lines, etc..
  • Suitable for many fields, like automotive, industrial, marine, shield, electronic or home applications.
  • Package includes: the hose clip kit comes with a total of 28 hose clips in a range of 10 sizes from 9 to 273 mm/ 0.3....
Check Stock

Stainless Steel Hose Clamp Kit - Heavy Duty Adjustable Worm Gear Clamps - Adjustable Band Clamps for Pipes Fuel Lines Radiator - Metal Strapping Tool in Automotive and Plumbing - Worm Drive Clamp

  • Hose clamps can be used to secure hoses, pipes, and fuel lines in automotive, home, garden, boat, radiator, and air conditioner applications. Hose clamps are available in a variety of sizes and designs to meet your needs..
  • This clamp will prevent pipe leakage and also can fit the hose perfectly and seal it without damaging it. This will keep the hose in good condition and allow it to function properly..
  • These stainless steel hose clamps are installed at the joints of the hose to prevent fluid leakage. The clamps are tightened so that they compress the hose, forming a seal. This seal keeps fluids from escaping..
  • The hose clamp is made of stainless steel for durability and resistance to corrosion. This makes it ideal for use in a wide range of industries, including automotive, marine, and plumbing..
  • The worm gear design of the hose clamp makes it easy to adjust the size of the clamp. The design is such that the worm gear can be tightened or loosened as needed, making it a versatile and convenient tool..
Check Stock