ReviewsStainless Railing

BLIKA 120 Pack Stainless Steel Protector Sleeves for 1/8' Wire Rope Cable Railing, Cable Railing Protector Sleeves, Deck Cable Railing Kits

  • Applications: This Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Made of Stainless Steel T316 Marine Grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance..
  • Size: Suitable for 1/8" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, Required Hole Diameter = 0.251 inch..
  • Feature: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • Package List: 120 Pcs 1/8 inch Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance(as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • ...nd ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget, especially with 1/8" swage lag screw Muzata CK17, level protector sleeve MUZATA CR13, angle....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs)

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel,So it can be used indoor and outdoor;.
  • This deck railing hardware fit 1/8-inch OD cable of railing system,The thread screws were designed for wood post,Length of lag screw is 4 inch and length of its thread is 2 inch;.
  • This swage lag screws used Integrated design,So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper;.
  • Note:Length of cable should be 1.5 inch shorter than wood post edge distance(as shown in fig.3).
  • If you want To DIY a high quality railing system,Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Muzata 2Pack 6 6 Stainless Steel Handrail Black Rectangular Handrail Flat Top Rail Cable Railing System Deck Stair Indoor Outdoor HT10 BP4

  • IMPORTANT to know before purchases - This item only contains 2pack 6'6" STAINLESS STEEL flat handrails. To avoid mismatch of accessories, please search following models to build your complete railing project: Muzata HA01 extension connector, HA02 90° corner connector, HA23 vertical pivot connector, HA24 level pivot connector, HA12 end cap, HA33 end bracket. You can check the bundle sets below to save time.
  • Material difference - Muzata offers both stainless steel handrails HT10 and aluminum handrails HL10 to suit specific needs. Please check the model number to avoid mismatches. Both handrails enjoy excellent waterproof and corrosion resistance. However, if your project is located near the seaside or humid areas, aluminum handrails are highly recommended for its super strong salt tolerance.
  • Wide applications - Muzata HT10 flat handrail can work with both metal and wood posts. It is widely used at residential and commercial areas. Recommended to work with Muzata black aluminum posts PD01 PD02 PW01 or stainless steel posts PS01 PS02 PF01 PF02. Search Muzata DG01 to find matched cable railing gate.
  • SpaceSaver System - SpaceSaver cable railing system is pre-designed to help you get a fully customized cable railing project. Components to build SpaceSaver sys....
Check Stock

Wayska 60 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector for 1/8" Wire Rope Cable Railing, Come with a Free Drill Bit

  • 【High Quality Material】- This 30 degree 1/8” wood post protector is made of T316 marine grade stainless steel, high tensile strength, anti-fatigue strength and waterproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance. .
  • 【Compatibility & Parameter】- These stainless steel protector sleeves suitable for 1/8”cable railing, perfect for outdoor and indoor cable railing system. Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28",Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • 【Easy to Install】-This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • 【Package Content】- 60pcs 30 degree angle cable protector sleeves + 1pcs drill bit..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit(Single lag screw) made of high quality Marine Grade T316-Stainless Steel,It is anti-rust、 durable and easy to maintain;.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted;So they can be used to all kinds of complex cable railing system:railing of stairs,deck railing and Garden fence…;.
  • This cable railing hardware applies to standard 1/8" inch cable(OD), Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation;The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage:high quality、easy to install and looks clean..
Check Stock

BLIKA 400FT 1/8 Deck Railing Cable with Cable Cutter T316 Stainless Steel Cable Aircraft Cable for Cable Railing Stainless Cable 1/8 Inch

  • ... contemporary finish to any project, whether used indoors or outdoors, residential or commercial. Cable railing system requires hardly any maintenance..
  • 【Size】1/8-Inch Diameter(3.2MM), 400-Feet Length, breaking strength 1850 pounds. Cable construction-7x7 construction, stiffer than 7x19, more flexible than 1x19. Stainless cable 7x7 commonly used for cable railings and marine applications..
  • 【Material】Marine Grade T316 Stainless Steel, strong corrosion resistance, wear resistance, weather protection, suitable for traction, pulling, strapping, landscape and architectural use, DIY deck cable railing Balustrade handrail systems. It is suitable for coastal installations..
  • 【Cable Cutter】Made of heavy Duty Cr-Mo Steel & Forged High-Carbon Steel, Durable and Sharp. Paint with electric-fusion, rust- resistant & long lasting. Ergonomic one hand operation design. Cuts up to 5/32" stainless steel wire rope cable. It's widly use in DIY projects, balustrades, railing, decking, fences, electrical and air craft cables, for bike brake and motorcycle cables..
  • 【Package List】1 x 400 Feet 1/8Inch Stainless Cable +1 x Cable Cutter + 50 Pcs Free Aluminum Double Barrel Ferrules. If you have any issues about our product, please kindly feel free to contact ....
Check Stock

Muzata 200pack Aluminum Crimping Loop Sleeve for Hanging and Securing 5/32inch(4mm) 1/8\ 1/16\ Wire Rope Single Barrel Ferrule CableLine End CB39

  • ... doesn't fail under load. Easily secure loops when anchoring cable by compressing with vise, pliers, compression tool.
  • These wire rope crimp Loop sleeve are made of aluminum alloy, which provides corrosion resistance and attractive appearance and durability to these wire rope sleeves, They are great to work on 5/32" stainless steel cable array for deck railing, properly crimped it will support 200lb load. These wire rope cable sleeves are the most economical solution for dog Leashes, Clothes Lines, Fishing Wire, Deck Railing, Stair Railing, and any other projects require loop ends on wire ropes..
  • Specifically designed for 5/32 In (4mm) Stainless steel cable wire rope, simply slide the cable into the wire rope sleeve, then pass the end of the rope back through the remaining ferrule to form an appropriately sized loop. After using a mechanical or hydraulic swaging tool to obtain the full holding power of stainless steel oval sleeves. It really depends on how good your swaging tool is. Please search B06XD4DY22 to purchase the recommended hand crimping tool..
  • CableGenie system - This product belongs to the wood CableGenie cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CR73 or ....
Check Stock

40 Pieces T316 Beveled Washer Angle Washer Stainless Steel Stainless 1/4 Inch 30 Degree Washer for 1/8 Inch to 3/16 Inch Cable Railing Wood Metal Aluminum Posts DIY Balustrade

  • Main function: these stainless steel angled beveled washers are designed for termination on end posts that have angled, or off set holes on stair railings, which can be screwed with threaded end terminals, suitable for short and long stud terminals, and even for tuner terminals.
  • Size information: the 30 degree angle beveled washer comes in 1/4 inch in inner diameter and 5/8 inch in outer diameter, that suits for 1/8 inch and 3/16 inch staircase deck cable railing.
  • Applicable to 1/8 inch stainless steel cable and threaded terminal stud end fitting.
  • Reliable material: made of T316 marine grade stainless steel for maximum durability, our angled beveled washers with high tensile strength and strong resistance to rust and corrosion, can serve you for quite a long time.
  • Applicable occasions: these reliable stainless steel angled beveled washers are practical and versatile for your own cable railing project and big scale indoor and outdoor applications, ideal for the the angle of garden, aluminum post of decking or stairs and aisle railing kit.
  • Package included: you will receive 40 pieces 1/4 inch 30 degree angled beveled washers at once, enough quantity with fine workmanship that will satisfy your indoor or outdoor applications, practical for wood, steel, alum....
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock