ReviewsStainless Steel Ball Valve Tap

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • Quality Materials: Full Port Heavy Duty 1" Ball Valve is made of high quality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden..
  • Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃～120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
  • Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

TMCRAFT 1.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 1.6 Gallon capacity can be stored and taken anywhere. Measures 8.9"L x 8.9"W x 11.1"H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

Trerice (735-2) Needle Valve, 1/4\ NPT Connection

  • ★★★★★【Safety】Good sealing and no leakage, perfect replacement for the old or damaged one.
  • Made of stainless steel material material, durable and not easy to rust..
  • ★★★★★【High Performance】The BSPP thread makes sure tight connecting and it can provide stable performance.
  • Female thread straight ball can be used for flowing regulation.
  • ★★★★★【Important Parameters】Item: Straight ball valve.
  • Optional Style: Type A: Black Handle 1/8in, Type B: Black Handle 1/4in, Type C: Black Handle 3/8, Type D: Black Handle 1/2.
  • ★★★★★【Application Range】Suitable for transmission of water, gas, oil, fuel and other media.
  • ★★★★★【What you Get】1 x Straight Needle Valve.
Check Stock

Shower Head Shut Off Valve, 304 Stainless Steel Mini Ball Valve NPT Thread(1/2\),Shower Head Flow Control Valve

  • Strong and sturdy:The shower switch valve is made of high-quality 304 stainless steel, which is more sturdy and durable for copper and plastic ball valves.It is recommended to wrap tape on the threads to better control the position of the ball valve on the hand shower and prevent water leakage.
  • Standard connection: 1/2 inch standard connection, NPT female and male, suitable for shower connectors in the United States，which also widely used at home, bathroom, kitchen, Motorhome, etc..
  • Function: The purpose of this stainless steel on-off valve is to conveniently control or close the water flow, even if your hands are full of foam or you are washing your hair. The water flow can be easily closed or reduced, thereby saving water..
  • Easy to use: The long stainless steel handle rotates a quarter turn to easily control the amount of water..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

DAN SPEED 2 NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

Pressurized Beer Mini Keg System - 64oz Stainless Steel Growler Tap, Portable Mini Keg Dispenser Kegerator Kit, Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - NutriChef

  • ...e same volume as traditional growlers and is laser marked at the fill level.
  • KEEPS YOUR BEER FRESH: A traditional growler will let carbonated beer go flat after the first pour but not this mini growler, as it will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer.
  • STAINLESS STEEL MATERIAL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • WORKS W/ DISPOSABLE CO2: Each cartridge will pump around 128oz of beer before depleting Co2 cartridges not included. Screw universal threaded 16g CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system.
  • UPGRADED REGULATOR: Monitor the mini keg growler's current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer coolerDescriptionNutriChef Model : PKBRTP50.5Homebrew Mini Keg - Stainless Steel CO2 Home Keg Dispenser System (64 oz.) Features:Compact & Portable Mini Keg SystemHomebrew CO2 System Keeps Carbonated Beverages Fresh All DayIncludes All Ne....
Check Stock

VARMHUS NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000 (1-1/2")

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock