ReviewsStainless Steel Band Clamp

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

  • The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Maximum Diameter: 2", Band Width: 1 1/4" (1.25").
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Squirrelly 4 Inch Heavy Duty Stainless Steel with Rounded Band Edges T-Bolt Clamp Turbo Intake Soft Hose Intercooler

  • Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
  • Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
  • These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
  • Clamp sizing: 104mm-112mm // 4.09" - 4.40". Fits 4" outside diameter..
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ...e for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you ....
Check Stock

Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers,Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,Hose Axle Plier CV Clamp Tool CV Joint Banding Tools

  • 【High-quality】CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • 【 2 Pcs CV Joint Boot Clamp Pliers 】 The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 【24 Pcs CV Boot Clamp】Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • 【Package Included】:1*CV Clamp Tool,1*CV Joint Boot Clamp Pliers,12*Small CV Boot Clamps,12*Large CV Boot Clamps.
  • 【CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers】 The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Plier....
Check Stock

Hose Clamps 304 Stainless Steel Single Ear Hose Clamp, 125Pcs (7-25.6mm) Crimp Pipe Clamps Assortment Kit 9 Sizes Ear Stepless Cinch Rings Crimp Pinch Fitting Tools (125Pcs with Pliers)

  • HIGH QUALITY- The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
  • 360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
  • WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
  • Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
  • SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
  • ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our cus....
Check Stock

AKIHISA T-Bolt Hose Clamps,304 Stainless Steel Heavy Duty Adjustable Tube Clamps (23-25mm 4pack)

  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, g....
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

YXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm, 2Pcs

  • Rust resistant steel sheath, stainless steel clamp type lock-up, notched sleeve allows installation, flush with nozzle hex..
  • It is mainly used in the heating devices of plastic injection machine stuffing container..
  • Band size : 35 x 35mm/1.4′ x 1.4 inch (inner Dia.H).
  • Package Content : 2 x stainless steel band heater.
Check Stock

Nxtop 110V 380W Injected Mould Heating Element Band Heater 35x35mm 2-PCS

  • Rust resistant steel sheath, stainless steel clamp type lock-up, notched sleeve allows installation, flush with nozzle hex..
  • It is mainly used in the heating devices of plastic injection machine stuffing container..
  • Band size : 35 x 35mm/1.4' x 1.4 inch (inner Dia.H).
  • Package Content : 2 x stainless steel band heater.
Check Stock

Beck/Arnley 103-2958 Constant Velocity Joint Boot Kit

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-in....
Check Stock