ReviewsStainless Steel Barbed Fittings

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

...(OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
5/16-inch barb connects your hose and screws/unscrews from fitting.
Included hose clamps tighten seal on hose and are winged for easier use.
PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.

Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..

Check Stock

GlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 12.7mm ID Inner Diameter - Includes Clamps

GlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 1/2" Inner Diameter Fuel Line.
Features 1/2" (12.7mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps.
Manufactured from 304 Stainless Steel that Prevents Corrosion.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 9.5mm ID Inner Diameter - Includes Clamps

GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 3/8″ Inner Diameter Fuel Line.
Features 3/8″ (9.5mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps.
Manufactured from 304 Stainless Steel that Prevents Corrosion.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

CONCORD Home Brewing Starter Kit. Weldless Setup including Ball Valve, Barb Hose, Bulkhead, Thermometer, etc

Starter Kit includes everything you need to turn any ordinary kettle into a brew kettle.
Includes 3" Glass Dial Thermometer (4" Probe).
304 Stainless Steel Bulkhead Fitting, Ball Valve, Barbed Hose, Hex Nut.
All Standard 1/2" NPT fittings is compatible with your current setup. Hole saw makes perfect sized hole to fit 1/2" NPT..
Starter Kit capable of installing 2 bulkheads with thermometer and ball valve onto your kettle..

Check Stock

Beduan Stainless Steel 5/8\ Hose Barb to 1/2\ Male NPT Home Brew Fitting Water Fuel Air (Pack of 2)

This Fitting is 5/8" barb to 1/2" NPT male, suitable for pipe with 5/8" ID..
Material: Made of 304 stainless steel, strength and resistance to corrosion..
Temperature range from -30 to +150 degrees F..
Barbed retracting locks for easy slide-back connecting and disconnecting..

Check Stock

ANPTGHT 5/16 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】5/16"Barb x 5/16"Barb x 5/16"Barb, Can be connected with 5/16" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

ANPTGHT 1/4 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】1/4"Barb x 1/4"Barb x 1/4"Barb, Can be connected with 1/4" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

ANPTGHT 3/8 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
【Size】3/8"Barb x 3/8"Barb x 3/8"Barb, Can be connected with 3/8" Hose ID..
【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..

Check Stock

Beduan Stainless Steel 1/4 Hose Barb to 1/4 Male NPT Home Brew Fitting Water Fuel Air Pack of 2

This Fitting is 1/4" barb to 1/4" NPT male, suitable for hose tubing with 1/4" ID..
Material: Made of 304 stainless steel, strength and resistance to corrosion..
Maximum working pressure of 2800 psi, Temperatures range from -868 to 1472 ℉/-500 to 800 °C.
Barbed retracting locks for easy slide-back connecting and disconnecting..

Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Y Shaped Union Home Brew Fitting

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Size: 1/4”Barb x 1/4”Barb x 1/4”Barb.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..

Check Stock