ReviewsStainless Steel Clevis Pin And Cotter Set

4 Pack 5/16 Inch Clevis Slip Hook Clevis Safety Hook with Safety Latch Clevis Rigging Tow Winch Trailer 14,000 Lb Capacity 3/4 in Opening

  • 【Reliable Strength】5/16 inch grade 70 clevis hooks with high-strength, forged steel construction and precision heat treatment which rated for heavy-duty loads up to 14,000 pounds gross trailer weight..
  • 【Secure Attachment】This clevis grab hook has a grade of 70 ratings, offering enhanced tensile strength, increased resistance to abrasion, and instilling greater confidence in your towing rig..
  • 【Quick Release】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
  • 【Corrosion-resistant】To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
  • 【Application】These grade 70 5/16 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc. It's great for connecting heavy-duty safety chains or securing transport binder chains. It meets requirements for high-test, transport and alloy chain..
Check Stock

4 Pack G70 Forged Steel Clevis Slip Hook 3/8 Inch Safety Hook with Safety Latch, Suitable for 10MM Chain Heavy Duty Grab Hook for Tow Winch Trailer, 18000 Lb Capacity

  • Reliable strength：With high-strength, forged steel construction and precision heat treatment, this 3/8 inch clevis slip hook is rated for heavy-duty loads up to 18,000 pounds gross trailer weight.
  • Provide security：This forged steel clevis slip hook has a grade-70 rating, offering superior tensile strength, resistance to abrasion. This chain clevis hook is great for connecting heavy-duty safety chains or securing transport binder chains.
  • Corrosion-resistant：To promote long-lasting use and dependable strength , this clevis grab hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements.
  • Quick release：This 3/8 inch safety chain hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin.
  • Application: These grade 70 3/8 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc. It's great for connecting heavy-duty safety chains or securing transport binder chains. It meets requirements for high-test, transport and alloy chain.
Check Stock

Robbor Safety Latch Hook 3/8 inch Clevis Slip Hook with Latch Grade 70 Forged Steel 18,000 Lbs Capacity Heavy Duty Chain Hook Working with Towing and Chain

  • Robbor 3/8inch G70 Clevis Slip Hook is Designed for Making Quick Connections with Chain in Industrial and Construction Applications, Exclusive Design and Spring-loaded Safety Latch Help Ensure Secure Attachment..
  • Robbor Clevis Slip Hook, Rated for 18,000 lbs. Gross Trailer Weight (each Hook Must Meet or Exceed the GTW) Manufactured from Forged Steel, Finished in Zinc for Superior Durability.
  • Hook Pin and Cotter Pin Provide an Easy, Secure Attachment to Safety Chain ,This Clevis Slip Hook is Equipped with a Spring-loaded Latch for Secure Attachment and Quick Release as Needed, 3/8" Diameter Pin.
  • Meets Grade 70 Hook Specifications, For Use with Grade 70 Transport Chain or With Chain of a Lower Grade.
  • More Attention -When Attaching Safety Chains, the Chains Should be Cross Underneath the Trailer Coupler, and Each Hook and Chain must be Rated to Meet or Exceed the Gross Weight of the Trailer.
Check Stock

5/16\ G70 Clevis Slip Hook with Safety Latch, 4 Pack Heavy Duty Slip Hook for Trailer Truck Transport Tow Chain Hook

  • HEAVY DUTY CLEVIS SLIP HOOK - 5/16 inch G70 Clevis Slip Hook is Designed for Making Quick Connections with Chain in Industrial and Construction Applications, Exclusive Design and Spring-loaded Safety Latch Help Ensure Secure Attachment..
  • SAFETY LATCH FOR QIUCK RELEASE - Hook Pin and Cotter Pin Provide an Easy, Secure Attachment to Safety Chain ,This Clevis Slip Hook is Equipped with a Spring-loaded Latch for Secure Attachment and Quick Release as Needed, 5/16" Diameter Pin..
  • EFFICIENT PERFORMANCE SLIP HOOK - When Attaching Safety Chains, the Chains Should be Cross Underneath the Trailer Coupler, and Each Hook and Chain must be Rated to Meet or Exceed the Gross Weight of the Trailer..
  • 4PCS 5/16" G70 CLEVIS SLIP HOOK - This 5/16 inch clevis slip hook with safety latch widely used in trailers, flatbed trailers, truck, crane, tractor, transport tow Winch hook trailer, etc..
  • MEETING YOUR REQUIREMENT - To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
Check Stock

Robbor 5/16 Chain Hook with Safety Latch Heavy Duty Clevis Slip Hook Grade 70 Forged Steel 14,000 Lbs Capacity Safety Latch Hook Working with Towing and Chain

  • Robbor 5/16 inch G70 Clevis Slip Hook is Designed for Making Quick Connections with Chain in Industrial and Construction Applications, Exclusive Design and Spring-loaded Safety Latch Help Ensure Secure Attachment..
  • Robbor Clevis Slip Hook, Rated for 14,000 lbs. Gross Trailer Weight (each Hook Must Meet or Exceed the GTW) Manufactured from Forged Steel, Finished in Zinc for Superior Durability.
  • 3)Hook Pin and Cotter Pin Provide an Easy, Secure Attachment to Safety Chain ,This Clevis Slip Hook is Equipped with a Spring-loaded Latch for Secure Attachment and Quick Release as Needed, 5/16" Diameter Pin..
  • Meets Grade 70 Hook Specifications, For Use with Grade 70 Transport Chain or With Chain of a Lower Grade.
  • More Attention -When Attaching Safety Chains, the Chains Should be Cross Underneath the Trailer Coupler, and Each Hook and Chain must be Rated to Meet or Exceed the Gross Weight of the Trailer..
Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

LucaSng 2Pcs 3/8 Inch Clevis Grab Hooks Grade 70 Transport Chain Hook, 7500 lbs WLL, Yellow Zinc Finish

  • Durable Material:Drop forged, medium alloy steel hook, quenched and tempered then zinc plated. Use with System 7 transport chain..
  • 3/8" Grade 70 transport grade clevis grab hooks,and should never be used for overhead lifting applications..
  • Easy to use：The shallow throat opening allows for easy and secure connections with 3/8 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • 30,000 LB Breaking Strength with 7,500 lb WLL (working load limit)..
  • These Grade 70 5/16 inch Clevis Hook are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc..
Check Stock

Glarks 96Pcs 12 Sizes 304 Stainless Steel Flat Head Single Hole Clevis Pins Assortment Kit

  • ❋ [Package]: The Kit includes different sizes clevis pins, M3x10, M3x12, M3x16, M3x20, M4x12, M4x16, M4x20, M4x25, M5x12, M5x16, M5x20, M5x25, a nice assortment of sizes that helped you match and find all the pins you need, and products of different sizes are placed separately to avoid confusion..
  • ❋ [Stainless steel material]: The clevis pins are made by 304 stainless steel, Anti-corrosion and anti-rust, can be used to fix parts of different materials..
  • ❋ [High strength]: Our products are made of solid materials, which will not break even if they are under heavy weight, and can be used for a long time..
  • ❋ [Easy to use]: The clevis pins are precise in size and smooth on the surface. They can be easily installed and disassembled even in narrow spaces, which can save you energy..
  • ❋ [Widely used]: Our products need to be used with cotter pins, can be used in industry, machinery manufacturing, household DIY and furniture installation..
Check Stock

US Cargo Control Clevis Grab Hook - 3/8 Inch G70 Chain Clevis Hook - Easily Secure Heavy Loads to A Truck Or Flatbed Trailer - 6,600 Pound Working Load Limit - 4 Pack

  • HEAVY DUTY CHAIN GRAB HOOK - This high-quality clevis grab hook is made of forged steel, is heat-treated, and coated with a yellow zinc chromate finish so it can survive even the toughest conditions..
  • EASY TO USE - The shallow throat opening allows for easy and secure connections with 3/8 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • STANDARD GRADE 70 HOOK - These grab hooks for chains are made specifically for 3/8" Grade 70 transport chain and should never be used for overhead lifting applications..
  • CLEAR IDENTIFICATION - All US Cargo Control standard grade 70 hooks and fittings are manufactured with a gold or yellow chromate finish for quick identification, along with the grade indication embossed on the surface..
  • SPECS - 3/8 inch Clevis Grab Hook | Grade 70 | Forged Steel | Yellow Zinc Chromate Finish | Product Weight: 1.1 lbs. | 6,600 lbs. working load limit | NOT FOR OVERHEAD LIFTING | Quantity: 4 Clevis Grab Hooks.
Check Stock

HVAZI 335PCS 304 Stainless Steel Cotter Pin Assortment Kit

  • High Quality 304 stainless steel Cotter Pin Kit total 335pieces.
  • The Assortment contain the following sizes:M1.2*10mm(100PCS).
  • All products are made of 304 Stainless Steel.
  • 304 Stainless steelhave good chemical resistance and may be mildly magnetic.
  • Place the cotter pin in the hole, the bulbous head will stop the pin from moving all the way through, bend the open tips to secure in place.
  • 100% New,Used for a wide variety of farm, lawn, garden and industrial applications etc.
Check Stock