ReviewsStainless Steel Cnc Machined

BW USA Berm Platform Bike Pedals – Lightweight Aluminum Flat Pedals for MTB and BMX – Orange

  • CNC MACHINED 6061 ALUMINIUM BODY – Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE – Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS – Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT – At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

RIDE IT PT-GROM Adjustable short Brake and Clutch Levers for HONDA GROM 2014 2015 2016 2017 2018 2019,HONDA Monkey 2019-Black

  • 6 Position Lever Adjustment stainless steel fasteners.
  • Precision Machined Pivot Bore To Ensure A Perfect Fit.
  • Perfect fitment without any modification.
  • Easy installation,prefessional installation recommended.
  • Machined from CNC Billt 6061 T6 Aluminum.
Check Stock

Hi-Tech KSG 4 Notch Barrel Nut Remover Tool

  • A must have tool to safely remove your stock "4 NOTCH" KSG Barrel Nut that is locktited on from the factory. If you have a "6 NOTCH" stock barrel nut,....
  • Our design does not allow the tool to touch the face of your gun keeping it perfectly safe and unscratched..
  • Backside is machined to accept a 1/2" standard socket. You can use a socket wrench or we recommend an Air impact wrench for best results. Spins off in....
  • CNC Machined from Stainless Steel for superior strength. Made in the USA!.
Check Stock

Fiblink Spinning Reel Aluminum Body 66 LBs Max Drag 4.1:1 High Speed Gear Ratio Left/Right Interchangeable Collapsible Handle Super Smooth Deep Sea Spin Reel (Noeby) (Infinite 7000)

  • Full Metal Body - The reels are built with a Non-Corroding Chrome Pleted Al-Si-Cu-Mg Aluminum body. 6 water-proof circles covered all body, rotor and drag knob. The surface of rotor component is protected by phosphating coating for enhanced wear resistance..
  • Smooth System - 9+1 & 10+1 precise stainless steel shield bearings, stronger precision NCTM (No Clearance Transmission Mechanism) solid brass pinion gears, strengthened aluminum drivetrain, stainless steel main shaft and sealed multi-disc carbon drag system in spinning reel delivers uninterrupted and balanced performance..
  • High Speed Smooth Spool - Twin ball bearing to support the high speed smooth running of spool.
  • CNC Machined aluminum spool. Stainless Steel and Carbon drag washers to support good dragging performance..
  • Changeable CNC Aluminum handle - Removable and changeable CNC Aluminum handle and EVA knob, elegant appearance. The reels feature a high speed 4.1:1 gear ratio, 66lb Max drag.
  • The high speed retrieve helps every angler battle the strong, fast runs of the biggest fish and the moderate speed is perfect for finessing in your next trophy..
  • Usage - It can be used for trolling fishing, jigging fishing or deep sea fishing.
  • 6.5mm/0.26” solid main shaft for monster fighting....
Check Stock

Johnson Level & Tool 1411-0600 Magnetic Billet Torpedo Level, 6\

  • FUNCTIONAL LEVEL: This leveler features powerful GripTight v-groove rare earth magnets that hold flat or round ferrous metal surfaces, offering hand-free use..
  • SECURE DESIGN: The surface-level features a stainless-steel screw conduit lock for accurate bend offsets..
  • QUALITY CONSTRUCTION: The Johnson level has a solid billet aluminum frame that promises excellent durability. The CNC machined level has heat dissipation for welding..
  • ACCURATE READING: The checkpoint level has a machined vial opening that provides accurate readings effortlessly..
  • HIGHLY RELIABLE: The 6 in. Magnetic Billet Torpedo Level has four vials that measure 0°, 30°, 45°, and 90°..
Check Stock

CAMEKOON Trolling Reel for Big Game Saltwater Fishing, Aluminium Frame and Graphite Side Plates, 3+1 Stainless Steel Bearings, Conventional Baitcasting Reel with Right Hand Retrieve

  • ...d 6061-T6 marine grade aluminum, while the side plates are made of extremely durable lightweight graphite material to reduce weight and are suitable for monster fish in various harsh conditions..
  • High Performance- The ACT conventional reels designed with 3+1 anti corrosion stainless steel ball bearings offers extremely smooth performance. Gear ratio is 5.1:1 on the size 321 and gear ratio is 4.1:1 on the size 331, size 341, and size 351. With the help of smooth and reliable performance performance, you can start fighting the big fish at any time..
  • More Powerful - An easy adjustable star drag system with carbon fiber drag washers extend drag durability and performance. A carbon fiber drag system composed of 4pcs carbon fiber drag washers and 3pcs stainless steel drag washers provides smooth drag up to 26LB even in wet conditions. Excellent performance you can't beat!.
  • Huge Capacity - ACT big game reel comes with a forged and machined aluminum spool that providing tons of line capacity to anglers using leadcore, heavy braid, or strong monofilament fishing line. Size 351 reel will hold over 580 yards of 30 lb. Thumb bar spool ....
Check Stock

Tigeracing Tie Down Anchors+MZS Lifts Kit, 2\ Front Coil Spacers Compatible with 1988-2007 Silverado & Sierra 1500 2WD Only

  • Note :Fits1988-2007 Silverado & Sierra 1500 2WD Only. Only fit 2WD models. Silverado 1500 / Sierra 1500 only fit classic models, Colorado / Canyon only fit models equipped with Torsion bars..
  • Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds!Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws,make it safe and stay on all the time when driving!.
  • Perfect Fit & Precise Structure : Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Advanced spray-paint technology not afraid of being scratched.Fearless of the wind, dust, rain and snow..
  • MZS lifts kit are CNC machined out of billet aluminum. Strong & Anti-Rust.Maintains factory ride quality. Increased ground clearance. Levels the front with the rear of the vehicle..
  • Important: Spacer thickness to lift amount is NOT a 1 to 1 ratio. To raise the front up 2.
Check Stock

Tigeracing Tie Down Anchors+MZS Lifts Kit, 2\ Front Coil Spacers Compatible with 1988-2007 Silverado & Sierra 1500 2WD Only

  • Note :Fits1988-2007 Silverado & Sierra 1500 2WD Only. Only fit 2WD models. Silverado 1500 / Sierra 1500 only fit classic models, Colorado / Canyon only fit models equipped with Torsion bars..
  • Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds!Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws,make it safe and stay on all the time when driving!.
  • Perfect Fit & Precise Structure : Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Advanced spray-paint technology not afraid of being scratched.Fearless of the wind, dust, rain and snow..
  • MZS lifts kit are CNC machined out of billet aluminum. Strong & Anti-Rust.Maintains factory ride quality. Increased ground clearance. Levels the front with the rear of the vehicle..
  • Important : Spacer thickness to lift amount is NOT a 1 to 1 ratio. To raise the front up 2.
Check Stock

Invidia HS15STIGTT N1 Titanium Burnt Tip Dual Cat-Back Exhaust System for Subaru WRX/STI

  • Pipe size: 76mm (3"), Tip size: 101mm (4").
  • Constructed with high-quality SUS304 stainless steel, CNC-machined flanges, and manufactured with a polished finish.
  • Mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure.
  • Twin outlet, single layer burnt Titanium tips.
Check Stock

Sougayilang Fly Fishing Rod and Reel Combo, 4 Pieces Ultra Lightweight Portable Fly Rod and CNC Machined Aluminum Alloy Reel Complete Starter Package with Rod Bag-#5/6

  • FLY ROD - 5/6 weight, 9ft, 4 pieces, IM8 graphite which has machined aluminum reel seat with double lock rings and laser etched butt cap, comfortable cork handle according to the ergonomic design which optimize your fishing experience. Stainless steel stripper guide with silicon carbide rings, stainless single foot guides and tip top. Each section is 29’’. Rod weight is 4.4 ounces..
  • ACCESSORIES - Sougayilang incredible fly fishing rod and reel combo includes a 4 sections rod, a CNC-machined reel, 100FT fly fishing line, backing line, connector, tapper leader, 5.5 inches hemostatic forceps, 12 hand tied flies, fly box, line nipper, retractable zinger and fly fishing starter guide book. You can carry this combo and go out to enjoy the happiness of fishing anytime..
  • ROD CASE - With a 29.5 inches rod case bag, which has a detachable and adjustable length straps. The case could hold all you need when fly fishing. 4-section cloth rod bag with ties can protect per section..
  • 2 Years Support - we give 100% heart to our customers, so whatever the pro....
Check Stock

PQYRACING Turbocharger Adaptor Flange T25 T28 GT25 GT28 5 Bolt to 3' v Band Turbo Outlet DOWNPIPE Flange Adapter

  • Adapter body material: Common stainless steel,V band flange material: 304 stainless steel Material: Cast & CNC machined forged billet T6061 aluminum.
  • Turbo discharge flange material: Laser cut mild steel with chrome plated.
  • Not blow out like the cheap paper ones,Design for turbo application.
Check Stock