ReviewsStainless Steel Flexible Conduit

TEMCo THA005 3-1/2 Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 -16 Thread

  • Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93".
  • Fits Draw Stud Size: 3/4"-16 (TEMCo THA001).
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

TEMCo THA032 1/2 Conduit Punch and Die For Hydraulic Knock Out Driver

  • Conduit Fitting Size: 1/2", Actual Hole Size: 0.86".
  • Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • ...Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience ....
Check Stock

TEMCo THA041 3-1/2 Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

  • Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93".
  • Fits Draw Stud Size: M20x1.5mm (TEMCo THA010). Fits Driver: Old style TEMCo TH0037.
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

IDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
  • Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
  • Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
  • Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

TEMCo THA040 3 Conduit Punch and Die For METRIC Hydraulic Knock Out Driver M20x1.5mm Thread

  • Conduit Fitting Size: 3", Actual Hole Size: 3.5".
  • METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty

  • Powerful 9 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". All dies have laser engraved alignment marks for easy and precise positioning..
  • Punching Thickness Capacity: 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
  • 5 Year Warranty from a well-known American name. NON-GENERIC.
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • 【Precision Cutting】 - The 2 inch metal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfor....
Check Stock

Morris 19426 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 1\ (Pack of 25)

  • Overall Size: 155x 30 x 80mm/ 6.10" x 1.18" x 3.15"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses.
Check Stock

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock