ReviewsStainless Steel Lifting Rigging

US Cargo Control - 3/8 Inch x 10 Foot Adjustable 4-Leg Chain Sling with Self-Locking Hook - Grade 100 Alloy Steel - Overhead Lifting Sling for Large and Heavy Cargo

  • DURABLE LIFTING CHAIN - Our Grade 100 lifting chain provides approximately 25% higher strength than Grade 80 chains, the industry grade for chain slings. They maintain their strength under extremely high temperatures up to 400 degrees Fahrenheit..
  • ADJUSTABLE CHAIN LENGTH - Lifting chains measure 10 feet in length from master link to end hook. Our chain slings come with grab hooks attached to the master link to shorten the chain to any desired length..
  • WORKING LOAD LIMITS - Chain slings can handle up to 22,900 pounds at a 60-degree hitch, 18,700 pounds at a 45-degree hitch, and 13,200 pounds at a 30-degree hitch..
  • HIGH-STRENGTH SELF-LOCKING HOOK - These industrial grade self-locking hooks automatically close and lock under the weight of the load for safe and secure rigging. Do not open while lifting..
  • WIDE APPLICATION - Chain slings provide safe use for any of the toughest overhead lifting and rigging tasks on a regular or repetitive basis..
Check Stock

3/8\ x 4' Single Leg Chain Sling | 8,800 Lbs WLL | Oblong Link-to-Oblong Link Ends | Grade 100 Alloy | 3/4\ Master Link | for Tough Conditions | Hanes Supply (HSI)

  • ROUGH AND READY: HSI chain slings are known for their ability to withstand a variety of tough conditions. A great lifting option when the rigging job calls for an application that can handle heat, filthy conditions, exposure to chemicals or extended outdoor use under UV rays..
  • OBLONG LINK ENDS: Both ends of the sling contain oblong master links which connect to loads where a lifting hook is already available. HSI chain slings will conform to the specific usage required to complete your rigging job safely..
  • GRADE 100 ALLOY: Most commonly used for overhead lifting applications due to its excellent energy absorption properties and strength to weight ratio. The material’s hardness makes it the logical choice when looking for durability in comparison to other grades that can wear quickly on the inner portion of the link..
  • DOUBLE TAGGED FOR SAFETY: Two tags are used on HSI slings to identify WLL (Working Load Limits). Riggers can reference critical information for safe sling application and OSHA compliance..
  • AMERICAN MADE RIGGING: Hanes Supply, Inc. is proud to be the industry-leading USA based manufacturer of hoisting solutions for industrial construction and building projects since 1930. All slings are manufactured in a certified ISO 9001: 2015 facili....
Check Stock

QIQU Marine Rigging Soft Shackle for Sailing Boating Yacht and 4wd Recovery (Blue, 7/16inch3.5inch)

  • Very light compare with stainless steel rigging shackle. Easy to open and close, will not get rusty compare with rigging hardware.
  • Widely used in sailing,yacht,boat,4wd recovery,rigging hardware..
  • One sleeve for free. You can add the sleeve by yourself when you need..
Check Stock

4 PCs Kayak Scupper Plugs Kit and 8 Feet kayak Bungee Cord with Bungee Cord Hooks Fishing Rigging D-Ring Cord J-Hooks with Screws for Kayak Boat Canoe Outfitting Fishing Camping Kayak Deck Rigging Kit

  • ✔️【Kayak Deck Rigging Kit】: Kayak bungee deck rigging accessories Included 4 PCs Special kayak scupper plugs kit, A 8 Feet 1/4 inch elastic bungee cord, 6 PCs Fix D-Ring with 6 PCs 304 M6 stainless steel screws and 6 PCs Fix J- hooks with 6 screws and 2 Bungee Cord Ends.
  • ✔️【Silicone Scupper Plugs Kit】: Made of Reliable Silicone, the pull handle and the connect point is very thick and durable that don’t worried it will be broke, allowing you to pull out and replace easily, keep water from intruding into the kayak to ensure you dry, sturdy and corrosion resistance that won’t get rotted when soaking in water.
  • ✔️【High-Quality】: Kayak boat Bungee cord is Marine Grade perfect for long trips, J hooks and kayak cord hooks are made of strong and durable Nylon, and kayak oval D ring is nylon & stainless steel ideal for your kayak boat canoe etc.
  • ✔️【D Ring and J Hook Function】: With install Screws Can be used with a paddle leash to grasp paddles, rods, nets and other items that need to be secured with bungee cords, Help to Fixed your Kayak seat in your boat kayak etc.
  • ✔️【Useful kayak deck rigging set 】: A useful kayak deck rigging parts accessories and versatile deck rigging kit package that adds and ensure a large ....
Check Stock

4 Pcs M12 Heavy Duty 304 Stainless Steel Double Ended Swivel Eye Hook,1 Inch Eye to Eye Swivel Shackle Ring Connector for Tree Swing Hanging Hammock Hanging,Safe Working Load 2200 lb.

  • 316 Stainless Steel Swivels: These stainless steel eye swivels are made by 316 stainless steel to make sure durable for your using. The surface of swivels are polished not only could be corrosion resistance but also have expensive appearance.Because of the 316 stainless steel material,it could bear high strength power and abrasion resistance..
  • Durable Connections Swivel Ring Hook: Because of the high quality material,it could make sure provide durable connection.Whether you use it as the different usages,it will You can use it as the part of connectors and use it combine with carabiners then become to necessary lifting accessories.You can use it with handles on your cable crossovers so that handles rotate not the cable..
  • Heavy Duty Swivel Eye Ring: The glossy surface would make sure corrosion resistance and abrasion resistance.You can use it as connectors for longer and no worry about taking the trouble to replace it.Once you start use it as eye to eye swivel,you will be impressed by how durable it is and longer using life..
  • Double Ended Swivel Eye Hook: Made by 316 stainless steel,it would make sure bear high strength power and longer using life.You can use it as connectors for chains and ropes.The smoothly rotate could prevent rope knotting from ....
Check Stock

TOUGHER Beam Clamp, 4400lbs/2ton Capacity I Beam Lifting Clamp 3Inch-9Inch Opening Flange Width Range Beam Clamp for Lifting Rigging

  • ➤ The i-beam clamp is built by durable steel and the Blue safety coating for surface protection, which can withstand the harsh environment, ensuring longevity. premium one pair of Glove for free on each order..
  • ➤ Heavy-Duty Beam Clamp is built for most construction and industrial uses. The beam clamps and hangers have jaw opening of 3" to 9" and provides a reliable and flexible rigging point for numerous applications. Easily installed and adjusted by hand..
  • ➤ It's very easy to attach to the metal I-beam outside your house. you can used it to hang your new hammock swing or lifting cast iron intermediates when building or repairing gas blowers..
  • ➤ Easy Opperation: Rotate the screw shaft counterclockwise to loosen the clamp, and then place it on the lower edge of the i-steel, and then rotate the screw shaft clockwise to fix the i-steel..
  • ➤ TOUGHER Lifting Beam Clamp is mainly used in factories, mines, highways, bridges, metallurgy,docks, warehouses, construction sites, etc. for the installation of machinery, lifting goods, mechanical equipment of infrastructure construction projects..
Check Stock

HEVERP 20PCS 1/8 Inches M3 Stainless Steel Wire Rope Cable Clip Clamp

  • Package:20pcs.The dimension of the clip is L:17mm x W:8.5mm x H:20mm.Product detailed size as picture 2 shown,please check the size to make sure it is what you want.Thank you!.
  • Material: Corrosion resistant stainless steel.If you are unsatisfied with our products, please feel free to contact us, we will provide you with a satisfactory solution..
  • The clip is suitable for using in 1/16"-1/8" diameter wire rope or cables.Please pay attention to the detailed size shown on the picture..
  • Our Wire rope clamps made of stainless steel, corrosion resistance, long life span for maximum corrosion resistance and durability.
  • Perfect for rigging rope, wire and cable in unlimited applications mainly in rigging, temporary guardrail systems, securing loads, hanging banners, flags and signs and basically anything that involves cables.
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

Ayunwei 52mm(2.04 inch) Fixed Snap Shackles 316 Stainless Steel Bail Snap Shackles with Quick Release Pin for Bracelet and Boat of 5 Pcs

  • These snap shackles are made of 316 stainless steel material, corrosion resistant in saltwater environment, not easy to rust, and hence, expect it to last longer.
  • Contain quick release pin, which allows the snap bail to be released, even under tension.
  • The maximum working load limit of 2.04 inch shackle is 450 kg, comes with 5 pcs shackles.
  • Great for your lifting and rigging needs or marine applications, or using it as a dog leash clip, halyards, surfing, outdoor survival and etc..
  • 【Satisfaction guarantee】 If you are dissatisfied with our shackles with any reason, please return your order during 30 Days for full refund ( if you have any doubts with installation or any other problem please contact us firstly).
Check Stock

BestEquip Beam Clamp 4400lbs/2ton Capacity, I Beam Lifting Clamp 3inch-9inch, Opening Range Beam Clamps for Rigging, Heavy Duty Steel Beam Clamp Tool, Beam Hangers for Lifting Rigging, in Yellow

  • 4,400 lbs Clamping Capacity: Working Load Limit: 4400 lbs. Dimension: 10.5''x3.5''x9''. It is made of 0.2'' thick steel plate. There also comes with an extra 6.5' lifting sling for you..
  • Solid Steel Structure: The i-beam clamp is built by durable steel, which can withstand the harsh environment. And the yellow powder-coating finish for surface protection ensures durability and longevity..
  • Manual Adjustment: Our I beam lifting clamp's width can be adjusted from 3'' to 9''. Quick adjustment to the size of beam width by rotating the screw shaft to fix the i-steel clockwise..
  • Easy To Use: Built-in attachment points provide high stability and reliable use. The clamp jaw is designed to reduce flange stress by distributing load away from the I-beam flange edge. Small size for applications on beams with a low base height..
  • Extensive Uses: Pererf for harsh indoor or outdoor environments. It is ideal for material lifting, rigging, and handling for industries such as factories, warehouses, construction, building, railway construction, etc..
Check Stock

Partsam 1100 LBS Capacity 10FT Lifting Manual Chain Block Hoist Come Along 1\\/2 TON 2 Heavy Duty Hooks Commercial Grade Steel

  • Application: this manual hand lift steel chain block hoist is widely used for personal manually lifting for loading stuff with a mechanical load braking system that allows for precise operation such as factories, construction sites, garages, workshops, warehouses, farms, docks, wharves, and mines, 360-degrees without twisting and bending, very flexible,helpful and safe..
  • 【Process & Material】the design is in accordance with EN13157 standard, it meets all pertinent world standars.
  • High Strength steel frame and gear case build to be durable for rugged needs of contruction and maintenance rigging.
  • Equipped with wide throat top and bottom drop forged hooks that are designed to bend slowly to warn of overloads. Load chain is alloy steel grade 80 accord with ISO3077 standard.
  • 【Capacity】 1100lbs Capacity for hoist.
  • 【Warranty】 3 Year. We are based on our own manufcturing aftersale services, feel free to tell us with your concern before or after your purchasing.
  • 【Package includes】 1pcs 1100lbs capacity manual chain hoist, 1pcs 6FT 20000lbs break through lifting sling.
Check Stock