ReviewsStainless Steel Line Pipes

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

51"Toilet Snake Clog Remover,Toilet Auger Grabber Tool，Plumbing Snake for Toilet,With 4 Claws Bendable Hose Pickup Reaching Assist Tool for Grabbing Objects Blocked in Toilet Pipes and Drainage Drains

  • Products Introduction: Our toilet unclogger tool is specifically designed for grabbing blockages in toilet pipes and various pipes. Snake toilet clog remover is equipped with thickened ABS Anti-slip red handle to control the spring that has a comfortable grab and is not easily broken. High-quality stainless telescopic link can help toilet auger more easily enter into pipes with 43 -inch-long stainless steel galvanized iron spring inside which is high-intensitive and not easy to become rusty and to be out of shape. In addition, it has Directional four-jaw picker that can firmly grab stoppers to achieve professional dredge effect..
  • Dismoutable Toilet Auger Grabber：With a design of four flexible grabber claws, the elastic GrabberClaw Pick Up Reacher with upgraded gripper has 1.6-inch diameters and firm holding power and it not easily drop. For pipes with relatively small diameters or pipes that don't need to use Four Jaw Pickup, you can demout the access pilers. And only by pulling toilet snake back and then can you clear away obstructions of pipes..
  • Easy Operation: You just need to pull the stainless push-pull rod to the maximum by grasping push-pull rod immovably w....
Check Stock

RESTEK 20250 Compact Ferrule for Agilent Gas Chromatography, Graphite, Fit =0.28 mm ID (Pack of 10)

  • Coupling pipe fitting for connecting and extending pipes.
  • Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

Double Headed Sheet Metal Nibbler Cutter, Lichamp Drill Attachment Nibbler Metal Cutting Double Head 360 Degree, 5 Pcs Tool Set with Iron Tool Box, for Workshop, Home DIY and Car Repair

  • PERFECT TOOL FOR ANY CUTTING TASK: This multi-purpose nibbler cutter is suitable for cutting of various materials such as sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, formica, plastic, fiberglass etc. Suitable for car repairing and maintenance, metal sheet, gutters, roof sections, complex shapes or stencils..
  • EASY USE AND CONTROL: Easily fit into any standard drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Compact size, easy to operate and labor-saving. Easy and fast to cut 14 gauge material and creates a precision, burr free edge, 360 degree double cutting head to cut straight line, curve line, circles, or many other irregular lines and shapes..
  • DOUBLE HEADED: Creative design with double heads, which is more powerful and durable than single head nibbler. Ergonomic design ultra-grip handle offers comfort, superior control, maneuverability and increased safety..
  • MAXIMUM CUTTING CAPACITIES: Steel plate 15 gauge, stainless steel 18 gauge, copper/aluminium plate 14 gauge, plastic/fibre board 14 gauge..
  • GUARANTEE: 100% Satisfaction Guarantee, 30 days return, refund policy without hassle, 1 year FREE exchange for a risk-free purchase..
Check Stock

Drain Line Adapter (DLA) With 1/2-inch Barb Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher (ET116-004, D-50B, DLA-D)

  • ...ET116-004 is designed for connecting dishwasher and reverse osmosis (RO) filter to a garbage disposal line. Its dishwasher connector accommodates various inside diameter (ID) dishwasher hoses (1/2-, 5/8-, 3/4-, or 7/8-inch). Its reverse osmosis 1/2-inch barb insert fits 1/2-inch ID RO drain tube. A hose coupler and stainless steel clamps are provided for a secure connection to the garbage disposal inlet. The ET116-004 installation enables plumbing pipes to stay intact..
  • ❤ DRAIN LINE CONNECTION: The ET116-004 enables the connection of the RO water filter to a garbage disposal with a dishwasher. Installing the ET116-004 is simple and allows bypassing the existing plumbing but with no pipes to undo..
  • ❤ QUIET OPERATION: The ET116-004 is designed to eliminate most reject water noise. It is also equipped with a self-cleaning port..
  • ❤ CERTIFICATION: The ET116-004 is legal to install in any state. It is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested. These certifications assure that ET116-004 is safe to use. The testing is conducted for every manufactured....
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair

  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge.
  • 360 degree double cutting head to cut straight line, curve line and circles.
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass.
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips.
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

Ahyuan Roll up Dish Drying Rack Over The Sink Kitchen Roll up Sink Drying Rack Portable Dish Rack Dish Drainer Foldable SUS304 Stainless Steel Dish Drying Rack (17.7''x11.2'')

  • Newest Displayed Dimension:17.7"(L) x 11.2"(W) X 0.5'' (H).16pcs SUS304 Stainless Still Pipes. Please kindly measure your sink size firstly before purchasing this roll up over the sink dish drying rack! Great Gift for Mother's Day, Father's Day, Christmas Day, New Year, family members and all festivals Gifts.
  • Stamped with SUS304 Marks Tough Stainless Steel Dish Drying Rack: Made of SUS 304 tough stainless steel, this drying rack is very solid and sturdy and it can resist to constant use and rust for years. In terms of construction, the anti-slippery rubbery grips on either end are firmly attached to the stainless steel pipes, those are our unique advantages.
  • Roll up Sink Drying Rack and Spacing-saving Dish Drying Mat: This dish drainer can roll up and go in a drawer quickly when not in use. Works great and keeps the kitchen sink area looking neat, the best one of dish drainers for kitchen counter. You can roll up this over the sink dish drying rack as much as you like during using it and for the pipes also can be removable.
  • Multi-use Folding Dish Drying Rack: This roll up drying rack unrolls above an open sink for air-drying washed dishes, for additional counter top space, or as a trivet. Vegetable and fruit dish drainers, great kitchen dish racks for c....
Check Stock