ReviewsStainless Steel Pipes And

Ahyuan Roll up Dish Drying Rack Over The Sink Dish Drying Rack Dish Racks for Kitchen Counter Dish Rack Over Sink Camper Accessories Dish Drying Rack (Gray, 19.7''Wx20.5''L)

  • 28pcs tough SUS304 stainless steel pipes. Color: Black/Silver. Product Size: 20.5"(L) x18.1"(W) X 0.5'' (H). Please kindly measure your sink size firstly before purchasing this over sink kitchen dishes drainer rack! Great Gift for family menbers and all festivals Gifts.
  • Tough Stainless Steel Dish Drain Rack: Made of SUS 304 tough stainless steel, this drying rack is very solid and sturdy and it can resist to constant use and rust for years. In terms of construction, the anti-slipperyrubbery grips on either end are firmly attached to the stainless steel pipes, those are our unique advantages.
  • Roll up Sink Drying Rack and Spacing-saving Dish Drying Mat: This dish drainer can roll up and go in a drawer quickly when not in use. Works great and keeps the kitchen sink area looking neat, the best one of dish drainers for kitchen counter. You can roll up this sink dish drying rack as much as you like during using it and for the pipes also can be removable.
  • Multi-purpose over Sink Roll-up Drying Rack: unrolling above an open sink for air-drying washed dishes, for additional counter top space, or as a trivet. Vegetable and fruit dish drainers, great kitchen dish racks for counter.
  • Heat Resistant Dish Drainers for Kitchen Sink: AHYUAN kitchen dish rack is thermores....
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • ...Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience ....
Check Stock

WINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps

  • Premium Materials: WINL hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: WINL stainless stee....
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock

5/16\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

  • Quality material: the entire hose clamp is made of quality 304 stainless steel, which is resistant to salt, rust, corrosion, water and oil.
  • Hose clamps with stainless steel material are firm and reliable, no need to worry about rusting and cracking when installed on pipes.
  • 10 Range sizes for options: these hose clamps are flexible and expandable with adjustable widths to fit 20 cm/ 7.87 inches hoses.
  • They include 10 steel hose clamps in different diameters to accommodate more hoses, and the fixture kit is flexible and easily extensible, with adjustable sizes ranging from 9 to 273 mm/ 0.35 to 10.75 inches.
  • Easy to install: the hose clamp is designed with a worm gear construction that adjusts its diameter to apply good sealing pressure.
  • It connects the hose so that the hose can be installed in a narrow space to prevent leakage.
  • These fixtures can also be applied for many times due to the 304 stainless steel material.
  • Wide application: the hose clamp could be firmly locked and applied to fasten hoses, pipes, cables, pipes, fuel lines, etc..
  • Suitable for many fields, like automotive, industrial, marine, shield, electronic or home applications.
  • Package includes: the hose clip kit comes with a total of 28 hose clips in a range of 10 sizes from 9 to 273 mm/ 0.3....
Check Stock

TECHNICAL PRODUCTS No. 7 Rubber Plug for 1-1/4 Inch Pipe

  • Safely seal off in-ground plumbing lines during freezing conditions!.
  • Winter freeze plugs are used to plug your swimming pool pipes after they have been drained to prevent water from entering the pipes and causing freeze damage..
  • The rubber expansion plugs are non-corrosive construction made of heavy-duty nylon, stainless steel, and high quality rubber..
  • Simply screw plugs into all return and drain inlets after blowing out lines..
  • Features stainless steel bolts and washers and large plastic wing-nuts..
Check Stock

FIREHIKING 90 Degree Stove Pipe 2.36inch/6cm Stainless Steel Flue Extension Elbow Chimney for Outdoor Wood Stove (2elbows)

  • 【Size】 - The stove pipe diameter is 2.36in/6cm..
  • 【Thickened Stainless Steel】 - The thickness of the straight pipe is 0.5mm and the thickness of the elbow is 0.35mm. Stainless steel material can resist rusting very well..
  • 【Durable】 - This stainless steel stove pipe is designed for outdoor camping wood stoves with good heat resistance and abrasion resistance..
  • 【Tightly Connected】 - The elbows and straight pipes are tightly connected and can be used together..
  • 【Usage Scenarios】 - The flexible combination of straight pipes and elbows allows the stove to be used in more places, such as hot tents, hammock tents, and RVs..
Check Stock

KES RO Water Filter Faucet Kitchen Bar Sink 304 Stainless Steel Drinking Water Faucet Brushed Nickel

  • T-304 STAINLESS STEEL: This kitchen faucet is made from T-304 Stainless Steel (premium lead-free material), ensuring drinking water safety for you and your family..
  • RUST-FREE FINISH: Faucet body, handle, escutcheon are all made from T-304 Stainless Steel, with added 18/10 Chromium/Nickel content to protect against corrosion & rust..
  • ADJUSTABLE WATER PIPES: Single cold water control valve, water pipes can whirl 360, more convenient to use..
  • 90 DEGREE SINGLE LEVER HANDLE: 90 Degree Single lever handle for quick and easy water control, washerless ceramic valving ensures precise water control..
  • NOTICE BEFORE BUYING: 1 hole deck-mounted.
  • USES 1/4″ TUBE, please check before buying the faucet can connect to your RO Unit or Water Filtration System..
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

‎DNA MOTORING ZTL-30SS 16 Pcs 3.0 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit Universal Fit

  • 【Universal Kit】Comes with 4 pcs Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • 【Specifications】16-Gauge Piping Walls.
  • 【Stainless Steel Construction】Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Easy To Use】Slip Fit Ends for Easy Installation, Provides Easiest Fabrication.
  • 【DIY Custom】Perfect Do-it-yourself Kit with Plenty of Options for your ,otorcycle, Automotive, Atv or Any Other Need you May Have.
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock