ReviewsStainless Steel Quick Disconnect Fittings

20 Packs Stainless Steel Filter Garden Hose Washer, Self Locking Tabs Keep Washer Firmly Set Inside Fittings with 40 Mesh for 3/4 Inches Garden Hose and Water Faucet

  • Package contents: the package includes 20 packs of 40 meshes stainless steel filter garden hose washers with 4 small outer tabs for 0.75 inches garden hose, adequate quantity for you to use for a long term.
  • Design and function: these rubber faucet washers are designed with 40 mesh stainless steel filter and 4 small outer tabs.
  • To filter sand and gravel to reduce the possibility of nozzle clogging and to fix them in place firmly and properly, preventing washers from falling out of the hose fittings.
  • Size: outside diameter: 25 mm, inside diameter: 16 mm, thickness: 3 mm, stainless steel: 40 mesh.
  • The hose washers fit most standard 0.75 inches garden hose fittings with hose thread connections.
  • Excellent material: the washers are made of stainless steel and quality rubber, which is durable and sturdy, and convenient for you to use, giving you a good experience of using reliable rubber washers.
  • Use: the hose gaskets can repair a leaky water tap, disconnect water controller, and then twist the faucet and replace the broken one so that you can have a good replacement part for garden hoses with water tap.
Check Stock

HPDMC 4500psi Yolk Fill Station for HPA Tanks - High Pressure Gauge - Aluminum Alloy Refill Adapter - 36in Teflon Hose - DIN Valve for PCP Paintball Tank Charging System (Black)

  • Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug..
  • The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided..
  • Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve..
  • Application: Refill your PCP air rifles with 4500 psi compressed air from a tank or fill paintball, HPA co2 tanks..
  • Easy to use: Simply connect each fill adapter to the male air tool fittings, the new double o-rings design, longer service life..
Check Stock

HPDMC 4500psi Yolk Fill Station for HPA Tanks - High Pressure Gauge - Aluminum Alloy Refill Adapter - 36in Teflon Hose - DIN Valve for PCP Paintball Tank Charging System (Red)

  • Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug..
  • The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided..
  • Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve..
  • Application: Refill your PCP air rifles with 4500 psi compressed air from a tank or fill paintball, HPA co2 tanks..
  • Easy to use: Simply connect each fill adapter to the male air tool fittings, the new double o-rings design, longer service life..
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • ...m In Line style with an inlet of 1/4 inch NPT and 4 outlets of 1/4 inch NPT sizes. It is compatible with Industrial "M", "D", and "I/M" type plugs and couplers. The max working pressure is 300 PSI..
  • SAVE YOUR TIME - This air tool allows you to connect and operate three tools from a single compressor and no need to disconnect your line when you want to switch tools. It also allows you to be able to connect to different types of connections without changing tools and hoses. You can also work with 4 different tools at the same time. You will get the job well done with ease in a less time..
  • EASY TO USE - The pneumatic manifold is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
Check Stock

Universal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
  • Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance，this is one of the needed items to have in your parts kit..
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..
Check Stock

Red Oak Tools Stainless Steel Ball Lock Disconnect with MFL 1/4’’ Fitting, Gas and Liquid Corny Fitting, Fits both the John Guest and stainless push fit connectors

  • Highest quality Stainless Steel and durability for both commercial and home use.
  • White Ball lock for gas disconnect and black for liquid disconnect.
  • These fittings make joining hose easy especially if you want to use the 4mm ID, Tubing, Beer Tap, Co2 Regulator, etc.
  • Fits both the John Guest and stainless push fit connectors.
  • Look fantastic on kegs and are extremely durable, no leaks, fit and finish are perfect.
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

25PCS Fuel Line Disconnect Tool Set & Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects，Compatible with Most Ford Chevy GM Models,Blue

  • [WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for most fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
  • [DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
  • [DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
  • [HANDY DESIGN & EASY STORAGE]--All cooler line removers are set in unique and organized locations in a blow-molded case for avoiding misplacing your tools between uses, while the outside handy c....
Check Stock

M MINGLE Ultimate Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8 Inch Quick Connect, 3/4 Inch to Quick Release, 8-Pack

  • ATTENTION: M22 14 mm swivel fitting has 14 mm inside diameter, NOT 15mm. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz. If washer needs 15 mm, may cause leakage..
  • 8-pack universal Pressure Washer Adapter Set, 4 kinds of couplers includes: Metric M22-14 swivel female + 3/8’’ plug, 3/8’’ quick disconnect + M22 male, 3/4’’ female + 1/2’’ quick connect, 1/2’’ plug+ 3/4’’ male..
  • Two Quick Connector Sets connect water outlet of pump to pressure washer hose or connect pressure washer hose to gun. The other two Quick Connect Kits converts 3/4’’ threads to quick release fittings, connecting all 3/4" standard garden hose to water inlet of power washer pump..
  • High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

  • Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
  • Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
  • SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
  • What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
  • Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..
Check Stock