ReviewsStainless Steel Sink Grid

American Standard 7434000.075 29.92-in X 16.26-in Sink Grid, Stainless Steel

  • Sink grid designed to fit the Memphis single bowl sink 7434000.075 #18SB.332211C.075.
  • Large Stainless steel grid with feet and bumpers.
Check Stock

BLANCO 237681 FORMERA Stainless Steel Sink Grid, Stainless

  • CUSTOM DESIGNED: Fits BLANCO FORMERA 33" KITCHEN SINK model #442763.
  • SINK PROTECTOR: Keep your beautiful sink looking flawless - the kitchen sink grate holds dishes and utensils off the sink base.
  • CONVENIENT DRAIN GRATE: Allows water to pass below standing the dishes, this stainless steel sink grid is ideal for food prep and rinsing plates.
  • IN-SINK DRYING RACK: Can also be used as a drying rack for glassware and crockery.
Check Stock

Sinkology SG017-31ST SinkSense Wagner 31 in x 14 Stainless Steel Kitchen Sink Bottom Grid

  • The Wagner is a solid, custom-made stainless steel bottom grid designed exclusively to fit Sinkology's Harper 35.75 in. farmhouse sink.
  • Protects your fireclay kitchen sink and keep dishes off the surface. Rubber feet and side bumpers provide added protection..
  • Handmade from durable extra thick stainless steel.
  • Take your farmhouse sink up a level by pairing you bottom grid with Sinkology GridLogic Plate Organizer (Model # SGL-PLT-ST).
Check Stock

Serene Valley Sink Bottom Grid 29-1/16\ X 13-15/16\

  • IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
  • Grid dimension: 29-1/16" X 13-15/16" for your sink bottom with Corner Radius 2"..
  • 304 Premium stainless steel with heavy-duty design (outer wire diameter 1/4" and inner wire diameter 1/8") to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
  • Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided..
Check Stock

Zeesink Sink Grid and Sink Grate Size 28 3/4 X 15 3/4 ,Kitchen Sink Protector,Sink Bottom Grid Rear Hole,Sink Grid for Single Bowl Kitchen Sink

  • Sink Grate:Stainless Steel Construction and Rear Drain Hole Design..
  • Kitchen Sink Protector:Protective Rubber Feet and Bumpers to Protect the Sink Surface from Scratching..
  • Sink Bottom Grid:Drying Sink Rack for Glassware and Dinnerware..
  • Sink Grid:Measure the Length and Width Inside the Sink, from 1" High of the Sink Bottom..
Check Stock

MELIHOME Sink Protectors for Kitchen Sink, 12 3/16\ x 13 3/8\ SUS304 Stainless Steel Sink Bottom Grid, Rear Drain Sink Rack Metal Protector Kitchen Sink Grate Mat Accessories

  • ...Your Kitchen Sink】Sink rack for bottom of sink can protect your sink from scratches and dents, wide grating can accelerate water flow and filter food debris.Silicone protective pads can reduce noise, it is not easy to fall and slide the advantages throughout the place..
  • 【Multi-Use】Kitchen sink grates with T304 stainless steel construction, anti-rust and anti-corrosion.Sink rack can allow water to flow away freely underneath your dishes and cutlery, which solved the problem of standing water in the sink when dishes are in it.You can use it as a drainer for rinsed vegetables, a drainer and air drier, a cooling rack or a drying rack..
  • 【How to Measure Your Sink to Find the Matching Grid?】1.Measure the dimension of your sink bottom at 1" height. 2.We suggest width and length of the grid of your choice has about 1/2" less than your measurement. Measure the grid of your choice have the same corner radius as the grid you choose..
  • 【Quality Service】Any purchase of MELIHOME sink grid series you will get a 30-day money-back and a trusted 3 years warranty. If any questions, please feel free to e-mail us.If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
Check Stock

Kitchen Sinks 30x18 inch Undermount Kitchen Sink Stainless Steel Sink 16 Gauge Single Bowl Kitchen Sinks Set with Accessories

  • 【Premium Material】Oxwiser kitchen sinks are handcrafted from high quality T304 stainless steel for rugged, durability and superior performance..
  • 【Description】Oxwiser kitchen sink Exterior size 30" (L) x18" (W), Interior size: 28" (L) x16" (W). Round coner design, easy to clean, X grooves quick drain and dry with sloped base channels..
  • 【Practicality】Oxwiser undermount kitchen sink with stainless steel grid, drainer and cotton towel, stainless steel grid is good to protect the sink from scratching, 3.5" Sink drainer diameter fits the standard garbage disposal unit in US..
  • 【Sound Dampening】Oxwiser uses extra-large, extra-thick rubber pads which reduces running water sound. Anti-condensation thickened noise reduction coating to absorb sound from sound sources and isolate condensation..
  • 【Quality Assurance】Oxwiser always puts customer service first, we are confident in the quality of our sinks and invite you to experience Oxwiser sinks..
Check Stock

MELIHOME Sink Protectors for Kitchen Sink, 26 9/16\ x 14 5/8\ SUS304 Stainless Steel Sink Bottom Grid, Large Single Bowl Sink Rack Metal Farmhouse Farm Kitchen Sink Grate Mat Accessories

  • ...Your Kitchen Sink】Sink rack for bottom of sink can protect your sink from scratches and dents, wide grating can accelerate water flow and filter food debris.Silicone protective pads can reduce noise, it is not easy to fall and slide the advantages throughout the place..
  • 【Multi-Use】Kitchen sink grates with T304 stainless steel construction, anti-rust and anti-corrosion.Sink rack can allow water to flow away freely underneath your dishes and cutlery, which solved the problem of standing water in the sink when dishes are in it.You can use it as a drainer for rinsed vegetables, a drainer and air drier, a cooling rack or a drying rack..
  • 【How to Measure Your Sink to Find the Matching Grid?】1.Measure the dimension of your sink bottom at 1" height. 2.We suggest width and length of the grid of your choice has about 1/2" less than your measurement. Measure the grid of your choice have the same corner radius as the grid you choose..
  • 【Quality Service】Any purchase of MELIHOME sink grid series you will get a 30-day money-back and a trusted 3 years warranty. If any questions, please feel free to e-mail us.If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
Check Stock

Sink Mat for Stainless Steel/Ceramic Kitchen Sink, Adjustable Sink Protector | Sink liner Pad | Dish Drying Mats, Easy to Clean & DIY Cut,Durable and Fast Draining 15''×11.5''

  • HIGH QUALITY SILICONE MATERIAL: This silicone sink mats is flexible,pliable and rustproof.Backside pattern cutting design allow to cut a hole for most drain openings, perfect conform to sink side,cushion the sudden force safeguard your fragile dishes.A good protection for your fragile glassware and stainless steel / ceramic sink..
  • HEAT RESISTANT: Our sink mats and protectors can handle up to 500F,you can safely place pots and dishes in the sink or porcelain countertop directly from the oven / stove.Also use as a drying grid, dishware drainer, drain rack, cooling rack, defrosting grid .etc.
  • RAISED & SOLID BOTTOM FEET: Non-slip and raised feet elevate the kitchen sink mats,allow food particles and water run through it. Also work as a dish drying mat under the sink. Kitchen sink grid has has an opening for the sink drain,fits most sigle / double bowl sinks..
  • CAN BE CUSTOMIZED TO YOUR KITCHEN SINK: The size of sink mat are 15*11.5 and 26*13. It can be cut to fit any area you need according to the bottom of the drain stopper. The color perfectly match the decor of stainless steel sink and porcelain sink..
  • DISHWASHER WASHING: Silicone material is dishwasher washing,easy to clean. Cleaning sink protectors with running water is also a good way.Another benefit of....
Check Stock

DELTA FAUCET Delta Lenta 32-inch Undermount 16 Gauge Stainless Steel Single Bowl Kitchen Sink with Accessories, 953034-32S-SS, Satin

  • STAINLESS STEEL KITCHEN SINK with UNIVERSAL design features clean lines and rounded corners for a sleek contemporary look that blends perfectly with any kitchen style – KIT INCLUDES stainless steel kitchen sink, black silicone bottom grid, stainless steel drain assembly w/ strainer – OUTER SINK DIMENSIONS: 32 in. L x 19 in. W x 9.5 in. D – Bowl Dimensions: 30 in. L x 17 in. W x 9 in. D – Minimum Cabinet Size: 36 in. – 3.88 in. drain opening compatible with all standard garbage disposals.
  • HEAVY-DUTY SINK made with high-performance TRU16 gauge stainless steel to stand up to everyday needs with great resistance to dents and damage – UNDERMOUNT DESIGN installs seamlessly to create a clean look with no exposed mounting deck, allowing you to wipe water and debris into the sink – REAR-SET DRAIN creates more storage space in the base cabinet – SPACIOUS SINGLE BOWL SINK offers generous space for washing large cookware and loads of dishes while containing mess and splatter inside the sink.
  • WEAR-RESISTANT SATINSHEEN FINISH is easy to maintain, offering resistance to rust and corrosion – NOISEDEFEND SOUNDPROOFING technology with large rubber pads on all sides of the sink greatly reduces noise and vibration – ANTI-CONDENSATION UNDERCOATIN....
Check Stock

13x16 and 11.26x14.5 inch Protectors Kitchen Sink Grates - Bottom Grids for Kitchen Sink - Sink Protectors Stainless Steel - Sink Rack for Bottom of Sink - Metal Sink Grate Set of 2

  • Kitchen Sink Grates: The size and measurement method of the sink protection grid are shown in the picture display. Please check the dimensions of your sinks before purchasing!.
  • Stainless Steel Sink Grates: we carefully designed our 13L x 16W and 11,26L x 14,5W premium stainless steel protective grids to fit most single and double bowl sinks. Our 2 Pack is great for top mount under mount and farmhouse apron sinks.
  • Bottom Grids for Kitchen Sink: have more purposes than just protecting your kitchen sink. You can use it as a kitchen rack to dry your dishes or why not use it as a cooling grid? We are sure you will find a place for your new sink protector!.
  • Metal Sink Protector: are made from chrome-plated stainless steel that is resistant to corrosion and rust. The superior finish looks sleek, modern, and stylish in your kitchen sink. Soft protective bumpers prevent scratching..
  • 30-DAY MONEYBACK: If you are not completely satisfied with your premium Sink Grate simply return it within the first 30 days for a full refund..
Check Stock