ReviewsStainless Steel Solenoid Valves

Aquarium Choice 6 Pieces CO2 DIY Reactor Bottle Cap Fish Tank DIY Quick Twist co2 Bottle Cap with 118 INCH Long Hoses

  • 【Support MORE raw materials】2.3L capacity and thickened wall cylinder, supporting 400g citric acid + 400g baking soda + 600ml water. Other....
  • 【304 stainless steel】Corrosion and high pressure resistant 304 stainless steel cylinder with a pressure load of 180kg/cm² (2560 psi). Safer to....
  • 【High quality solenoid valve】The bubble counter is integrated with the solenoid valve and has a built-in check valve. And the solenoid bubble....
  • 【Attention】This set contains almost all the necessary accessories, only the reaction raw materials need to be prepared by yourself..
  • 【Most parts are replaceable】Quality inspection one by one, rather than random inspection! We are serious about quality control and buyer....
Check Stock

RKX AC Compressor Control Solenoid Valve Compatible with Audi and Volkswagen Compressors made by Sanden PXE16 PXE14 MK5 MK6 B8 TDI

  • Highest quality control valve available GUARANTEED! Our valves feature premium quality materials and craftsmanship. All valves undergo rigorous quality testing and inspections. Our valves are manufactured in an ISO 9001, IATF 16949 certified facility..
  • PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING The manufacture used several suppliers for the AC compressor! This solenoid is only compatible with Sanden PXE16 PXE14 compressors held in with a snap ring and are visually identical..
  • Please note this is a new updated valve and may be longer than the valve found in your compressor. It is 100% compatible with the short style valve..
  • Compatible with Audi and Volkswagen vehicles from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
  • THIS IS VALVE IS SECURED INTO THE COMPRESSOR BODY USING A SNAP RING. If your valve is held in with a bolt please see our other listing. This part is only compatible with Sanden compressors. If you compressors is manufactured by another company please check our other listings..
Check Stock

Motorized Ball Valve- 1 Stainless Steel Electrical Ball Valve with Full Port 9-24V DC and 5 Wire Setup can be used with Indicator Lights [Indicate Open or Closed Position] by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING-1" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully....
  • 5 WIRE INDICATOR LIGHTS SETUP- 5 Wire setup allows for easy operation and indicators for when the valve is fully open or fully closed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically reduces power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great....
Check Stock

Intake & Exhaust Camshaft Position Actuator Solenoid Valve Replacement for Chevy Cobalt HHR Malibu Equinox GMC Terrain Pontiac G6 & more GM Vehicles - 2.0 2.2 2.4L Replaces 12655421,12655420

  • REPLACeS PART # ----- Intake Solenoid #: 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014 | Exhaust Solenoid #: 12655421,....
  • COMPATIBLE VEHICLES ----- These Camshaft Position Actuators (also called VVT Solenoids) replacement for 2006 - 2010 Chevy Cobalt, Chevy Malibu 2008 -....
  • PERFECT FUNCTION ----- Intake & Exhaust camshaft position actuator solenoid valves to clear Check Engine Light CEL codes P0010 P0011 P0013 P0014.....
  • PERFECT OEM FIT ----- Each Camshaft Position Solenoid Valve Actuator is manufactured to the same specifications as the factory actuator. Each Actuator....
  • 1-YEAR WARRANTY ----- Order from both actuator solenoids from SURIEEN comes complete with 12-MONTH Warranty. If either actuator fails on your vehicles....
Check Stock

CPS Solenoid Valve Magnet Tool #TLMKC18, Original Version (CPS - TLMKC18)

  • Solenoid Valve Troubleshooting Magnet, 18Mm.
  • Direct Connect Or Pilot Operated 2-Way Solenoids.
Check Stock

2 Wire Turbo VGT Solenoid & IPR Pigtail Harness Replacement for 6.0L Ford Powerstroke & Chevy GMC Duramax 6.6L

  • Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness..
  • Compatible with 6.0L Powerstroke Turbo VGT Solenoid (AKA Boost Controller) and IPR Valve 2003-2010 (2003 2004 2005 2006 2007 2008 2009 2010)..
  • Compatible with 6.6L Duramax (LLY/LBZ/LMM/LML/LGH) Turbo VGT Solenoid (AKA Boost Controller) 2004-2016 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016)..
  • Female Socket 2-Wire Pigtail Adapter Connector Repair Harness Kit For Ford Power Stroke, Navistar, And GM Duramax Engines..
  • You will get: 1x Connector Adaptor Wiring Harness..
Check Stock

MagTool 4L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve (4L with Solenoid)

  • 4 Liter Capacity. That is 2x larger than the size of our competitors’ CO2 generator systems. Holds 600g-800g of citric acid and sodium bicarbonate, aka baker soda powders..
  • Professional CO2 Kit With All Accessories Needed For A Complete Setup! 4 Liter SUS304 stainless steel bottle / DC mini solenoid / Regulator / Precision needle valve / Bubble counter / CO2 diffuser / CO2-graded tubing / Plastic funnel and measuring cup..
  • Safety! The wall of the bottle meets the safety requirement - 1.5mm thick SUS304 stainless steel. It can sustain pressure up to 1137 PSI (80kg/cm2). The built-in safety valve will open automatically when the inside pressure exceeds the safety threshold..
  • 12V DC Instead of AC Power. DC solenoid runs on very low voltage and generates almost no heat. The solenoid is warm to touch and is super quiet. No humming noises..
  • Attentions: The required powders to generate CO2 gas are NOT included! You will need citric acid and sodium bicarbonate powders..
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

mistcooling Misting Fan Kit-18” Fan with 1500 PSI Misting System-Residential, Restaurant and Industrial Misting Pump – High Pressure (White Color) (6 Fans 18\ White)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor us e - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock