ReviewsStainless Steel Tap

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
➤[Package include]: 17xTaps for Internal Threads.

Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

NutriChef PKBRTP299 Pressurized Mini Keg System, 128oz Double-Walled Stainless Steel Growler Tap Portable Dispenser Kegerator Kit, Co2 Regulator for Craft Beer Draft/Homebrew

DOUBLE-WALLED: Double-walled stainless steel insulation keeps beverage warm/cold for 8 hrs, Traditional growler kegs will let carbonated drink go flat after the first pour but not this 128 oz keg, it keeps beer vacuum pressured & fresh for weeks.
128OZ VOLUME CAPACITY: Includes metal screw on cap for easy portable transportation & storage. Its 15.7” short cap design fits into your home fridge or kegerator. The barrel is the same volume as traditional growlers & laser marked at the fill level.
STAINLESS STEEL MATERIAL: The drink tank growler tap dispenser kit is constructed w/ solid food grade stainless steel, regulator is made from aluminum & tap from brass material. The pressure release valve allows safe removal of the tap hardware.
ADJUSTABLE REGULATOR: Monitor the current PSI of the 1 gallon growler cooling tank from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. The hexagonal screw cap makes it easy to grip.
SET INCLUSIONS: The 3.7 liter keg includes cap spear, brass tap, CO2 aluminum regulator w/ 0-30 PSI, food grade silicone O-Ring kit, 47.24” silicone beer tubing (0.2” inner diameter & 0.4” outer diameter. Perfect for any homebrew/craft draught beer.

Check Stock

EdgeStar KC2000 Full Size Kegerator and Keg Beer Cooler

Holds US Standard 1/4 and 1/2 Kegs. Does NOT support use of Coors, Miller, rubberized or other oversized kegs.
5 lbs CO2 cylinder included (supplied empty).
Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"), Warranty: 90 days labor, 1 year parts.
For freestanding use only, Casters included for easy mobility, Drip tray catches spills to contain drips and messes.
For a stainless steel version please see model# KC2000SSA, for a dual tap see KC2000TWIN, and dual tap stainless KC2000SSTWIN.

Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

...piral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping tools, such as tap wrench, tapping machine. Micro taps(such as M1-M3.5) are mainly us....

Check Stock

2 Pcs Stainless Steel Kitchen Sink Tap Hole Cover ，Kitchen Faucet Hole Cover ，Faucet Hole Cover，Sink Tap Hole Cover，Kitchen Faucet Hole Cover Stainless Steel (1.2 to 1.6 Inch in Diameter)

Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting and will not fade ，Can be used for a long time。.
Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying..
Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover is equipped with a rubber gasket to achieve a good seal and avoid leakage..
Stainless Steel Kitchen Sink Tap Hole Cover device is decoration and leakage prevention,preventing water from leaking onto the floor,keep the kitchen clean and tidy.Kitchen Sink Tap Hole Plate Stopper Cover very small, which convenient to store and don not take too much space..
We believe that our Premium Sink Tap Hole Cover，will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..

Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
➤[Package include]: 17xTaps for Internal Threads.

Check Stock

Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp

★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals..
★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider..
★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on..
★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose..
★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler..

Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

...ize: M1.8 x 0.35 metric thread, H2 thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.

Check Stock

KitchenAid KCM4212SX Cold Brew Coffee Maker-Brushed Stainless Steel, 28 ounce (RENEWED)

factory REFURBISHED (RENEWED) Smooth, Rich Full-Bodied Flavor Simply, fill with coffee and cold water, steep, & enjoy.
Streamlined Design Beautiful, streamlined design with glass and stainless steel components to preserve taste, for easy use and cleaning..
Always on Tap Built in stainless steel tap to dispense your cold brew from your refrigerator and carrying handle for easy portability..
Reusable Stainless Steel Steeper Allows you to brew the beverage of your choice and is labeled with fill level indicators to take the guesswork out of the brewing proc.
Model KCM4212SX makes up to 14 Servings* Simply mix 2 oz of coffee concentrate with every 6 oz of your favorite milk, water or ice. This brewer makes up to 28 oz of coffee concentrate that stays fresh in the fridge for up to 2 weeks. *Servings may vary based on coffee or tea type..

Check Stock