ReviewsStainless Steel Welded Tubes

Dinghy Sailing Race Control

  • ...steering. Very portable and easy to assemble or disassemble in 10-15 minutes.
  • FEATURES: Electric trolling motor compatible. 3-20hp Outboard Compatible (depending on model). Air Keel creates a shaped V hull for easy planing and improved steering. Sturdy carrying handles. 3x Stainless steel bow D-rings for towing. D-rings on bow/tail tubes for bimini and accessory attachments (not pictured). Self bailing transom drain valve. Easy grab rope plus splash guard around edge limits water spray inside boat.
  • PREMIUM QUALITY: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology.
  • INCLUDED IN BOX: PVC Boat Hull, Aluminum framed marine wood floor, one aluminum bench seat, 2 aluminum oars, storage bag, foot pump, 2 repair patches plus valve wrench, 1 front carry D ring plus 2 rear exterior sturdy carrying handles, port and starboard front towing D-rings.
  • USCG APPROVED. Manufacturer Certifica....
Check Stock

POWERGO MOTORSPORT 1152403820 1-1/2 x 2-5/8 inches 304 Stainless Steel Shorty Headers for C1500 C2500 K1500 K2500 Suburban Blazer Jimmy Tahoe Yukon | 5.0 5.7 305 350 V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM, which brings excitement to street driving and is ideal for street racing.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16 in. (11.5mm) thick steel plates and flattened by hydraulic press.
  • Polished surface for extra resistance against rusting.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

For Suzuki DRZ 400 2000-2019 DRZ400 S/SM DR-Z400 DR-Z 400 DRZ400S DRZ400SM Motorcycle Exhaust Pipe Muffler With Header Link Pipe Full System (C)

  • Fits All Can Am Renegade G2 XMR. Fitment Below.
  • Built and assembled in our shop located in northern Sweden.
  • Cans and tubes are high-quality SS304 stainless steel.
  • All aluminum parts are 6061, CNC machined out of a billet block.
  • Precision TIG-welded with high-quality filler rod.
Check Stock

Exhaust Headers 1-1/2 in. 304 Stainless Steel Polished Finish for 88-95 C1500 C2500 K1500 K2500 Silverado Sierra 92-95 Suburban Blazer Jimmy Tahoe Yukon 305 350 cu. in. 5.0L 5.7L

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16-inch (11.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting.
Check Stock

Switching Goals

  • CONSTRUCTION: All weather steel construction for durability and authentic feel.
  • FEEL LIKE THE PROS: Both posts have flags attached so wind can be considered when kicking. This feature was also added to replicate what is seen in the end zone of every NFL team.
  • STABILITY: Steel base with welded supports and four ground stakes for maximum stability.
  • EASY ASSEMBLY: Quick connect steel tubes allow for easy assembly.
  • Assembles to 8.5' x 5.5' with crossbar at 40 inch high.
  • AUTHENTIC FEEL: Padded ground post replicates what is seen on field to create an authentic experience for young athletes.
Check Stock

Newport Baja Inflatable Boat - 11ft Marine Wood Floor

  • ...eering. Very portable and easy to assemble or disassemble in 10-15 minutes,..
  • FEATURES: Electric trolling motor compatible. 3-20hp Outboard Compatible (depending on model). Air Keel creates a shaped V hull for easy planing and improved steering. Sturdy carrying handles. 3x Stainless steel bow D-rings for towing. D-rings on bow/tail tubes for bimini & accessory attachments (not pictured). Self bailing transom drain valve. Easy grab rope + splash guard around edge limits water spray inside boat,..
  • PREMIUM QUALITY: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology,..
  • DIMENSIONS & CAPACITY: Model: Baja. Length: 11ft 9 in. Tube diameter: 18 in, Inflated width: 66 in. Chambers: 3 + 1 keel. Max Power: 20HP. Max Engine Weight: 115 lbs. Outboard Shaft: Short 15”-17”. Max Load: 1519 lbs, Max Persons: 6,..
  • USCG APPROVED. Manufacturer Certificate of Origin & Vessel Bill....
Check Stock

Backyard Football 2001

  • CONSTRUCTION: All weather steel construction for durability and authentic feel.
  • FEEL LIKE THE PROS: Both posts have flags attached so wind can be considered when kicking. This feature was also added to replicate what is seen in the end zone of every NFL team.
  • STABILITY: Steel base with welded supports and four ground stakes for maximum stability.
  • EASY ASSEMBLY: Quick connect steel tubes allow for easy assembly.
  • Assembles to 8.5' x 5.5' with crossbar at 40 inch high.
  • AUTHENTIC FEEL: Padded ground post replicates what is seen on field to create an authentic experience for young athletes.
Check Stock

Blackburn Chicane Water Bottle Cage (Stainless Steel, One Size)

  • 4MM WELDED STAINLESS STEEL - 4mm welded stainless steel construction.
  • WONT RUST - Won't rust or scuff water bottles.
  • INCREDIBLE STRENGTH - 6mm alloy tube construction.
Check Stock

Happybuy Horizontal Sausage Stuffer 3L/ 7Lbs Manual Sausage Maker With 5 Filling Nozzles Sausage Stuffing Machine For Home & Commercial Use Stainless Steel

  • 304 Stainless Steel Material: Our sausage stuffer consists of a whole sturdy 304 stainless steel body, base, cylinder, and tubes, which are designed....
  • Horizontal Design & Easy to Use: Using the horizontal design, mainly as the center of gravity is lower, ensuring that the machine is more stable when....
  • Multi Filling Tubes: Comes with five stainless steel stuffing tubes (Φ10 mm, Φ16 mm, Φ22 mm, Φ32 mm, Φ38 mm), which can meet different size....
  • Large Capacity & Easy Cleaning: This horizontal sausage machine is equipped with a stainless steel cylinder with a capacity of 3 liters / 7 lbs, which....
  • Wide Application: This sausage stuffer is not only suitable for all kinds of restaurants, snack bars, canteens, workshops, and markets but also an....
Check Stock

Tioyar Front Bumper w/Winch Plate + 5 LED Lights Fit 1984-2001 Cherokee XJ and Comanche MJ

  • Fit 84-01 Cherokee XJ /1984-2001 Comanche MJ.
  • Bumper uses 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tubes to make the bumper harder and more durable. The grade 3 textured black powder coating is corrosion resistant and durable..
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The front bumper contains a built-in winch plate that can support a 12,000-pound winch. inside and outside of the D-ring mount are mechanically welded to achieve maximum strength..
  • Both the inside and outside of the D-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. It is also safer when off-road. The front bumper is equipped with 1x144W LED aluminum light + 2x20W LED aluminum lights + 2x18W LED aluminum lights..
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Gibson 65572 Stainless Steel Dual Extreme Exhaust System

  • Exits Behind Rear Tire At An Aggressive Angle.
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out.
  • T-304 High Polished Stainless Steel Clampless Slash Tips.
Check Stock