ReviewsStainless Stell Ball Valve

RAINPAL RBS006 Stainless Steel Rain Barrel Spigot (Quarter Turn Ball Valve)

  • Attention: Inside Access Needed to Install the Nut.
  • Stainless Steel 304 Body w/ Aluminum Alloy Handle. No Lead, Corrosion Resistant..
  • Stainless Steel Quarter Turn Ball Valve, Turn Right to close..
  • For all ball valve, there is a chamber around the ball may trap water. May contain water from testing, which is normal..
  • Fit up to 1/4 inch thickness wall, 10 mm water flow opening, With Garden Hose Hook up. Need 21mm or 7/8 inch hole saw to install..
Check Stock

VARMHUS NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000 (1-1/2")

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit Brass,Silver,Red,Blue

  • PERFECT TOOL for replacing damaged valve cores with R1234yf refrigerant in the system without losing the systems charge.
  • ATTACHES TO R1234yf SERVICE PORTS to quickly and easily remove and replace valve cores without the loss of refrigerant.
  • BALL VALVE DESIGN with stainless steel ball provides smooth movement and durability.
  • KIT COVERS 17 mm and 14 mm high and low side service ports.
  • INCLUDES standard valve core shaft, GM large bore valve core shaft, Eaton R134a/R1234yf high side valve core shaft, low side 14 mm connector, high....
Check Stock

Megairon 316 Stainless Steel 2" Full Port Ball Valve with Blue Vinyl Handle, NPT Female x Female Thread,1000 WOG(US Stock)

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

TMCRAFT 1.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 1.6 Gallon capacity can be stored and taken anywhere. Measures 8.9"L x 8.9"W x 11.1"H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

Trerice (735-2) Needle Valve, 1/4\ NPT Connection

  • ★★★★★【Safety】Good sealing and no leakage, perfect replacement for the old or damaged one.
  • Made of stainless steel material material, durable and not easy to rust..
  • ★★★★★【High Performance】The BSPP thread makes sure tight connecting and it can provide stable performance.
  • Female thread straight ball can be used for flowing regulation.
  • ★★★★★【Important Parameters】Item: Straight ball valve.
  • Optional Style: Type A: Black Handle 1/8in, Type B: Black Handle 1/4in, Type C: Black Handle 3/8, Type D: Black Handle 1/2.
  • ★★★★★【Application Range】Suitable for transmission of water, gas, oil, fuel and other media.
  • ★★★★★【What you Get】1 x Straight Needle Valve.
Check Stock

JOERICA 6 Pcs 20G Stainless Steel Screw Nose Studs Rings CZ Body Jewelry Piercing Golden-Tone

  • ♥♥STYLISH SET♥♥ One order includes 10 pcs screw nose rings with 10 different styles, 2mm round cz/2mm square cz/2mm flat top/2mm ball/2.5*3mm heart cz/4*4.5mm hollow heart/4mm rose/3mm clay ball, each one is different and unique, make you attractive and trendy everyday..
  • ♥♥QUALITY MATERIAL♥♥ Built of quality 316L stainless stell , healthy material, low irritant and not readily corrode, rust, or stain with water, comfy for your sensitive nose. Great polish and electroplated, give you smooth wearing feeling..
  • ♥♥SIZE♥♥ Pin thickness: 20 Gauge(0.8mm), 7mm wearable bar length, well fitted as nose stud and other labret retainers. Sparkling AAA+ CZ and unique shape, give you charming look and win more compliments..
  • ♥♥CLASSIC DESIGN♥♥ Classic screw shaped pin, stay in place, won.
  • t come loose, easy to put on and take off. All-match style, great for daily casual wearing and special occasions as well..
  • ❤SERVICE GUARANTEE❤ Within 365-Days, If You Are Not Satisfied, We Promise Exchange and Money Back Guarantee, It Is Our Ultimate Goal to Let You Have a Satisfying Shopping Experience..
Check Stock

EDOU DIRECT Ball Valve for High Pressure Washer Hose Kit | 3/8" Male Plug X 3/8" Female Quick Connect | 4,500 PSI Max Working Pressure | Includes replacement Quick Connect and Teflon Tape

  • Professional Ball Valve Kit - Includes 3/8” quick coupler plug and 3/8” quick coupler socket. The ball valve kit is designed for using with a high pressure hose..
  • Premium Quality - Made of stainless steel and designed for a maximum working pressure of 4,500 PSI..
  • Leak Free - Apply Teflon tape (included) to the ball valve for a superior, leak-free experience..
  • Highly Convenient - The ball valve is easy to turn on & off, and provides good leverage under high pressure. Switch wands, tips, or hoses quickly and easily..
  • Superior Value and Excellent Customer Service - Includes lifetime professional customer support within 24 hours..
Check Stock

EDOU DIRECT Ball Valve for High Pressure Washer Hose | 3/8" Male Plug & 3/8" Female Quick-Connect | 4,500 PSI Max Working Pressure | Easily and quickly switch between wands, tips, or hoses.

  • Professional Ball Valve Kit - Includes 3/8” quick coupler plug and 3/8” quick coupler socket. The ball valve kit is designed for using with a high pressure hose..
  • Premium Quality - Made of stainless steel and designed for a maximum working pressure of 4,500 PSI..
  • Leak Free - Apply Teflon tape to the ball valve for a superior, leak-free experience..
  • Highly Convenient - The ball valve is easy to turn on & off, and provides good leverage under high pressure. Switch wands, tips, or hoses quickly and easily..
  • Superior Value and Excellent Customer Service - Includes lifetime professional customer support within 24 hours..
Check Stock