ReviewsStainless U bolts

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
The antenna does not come with mast pole mount.
it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..

Check Stock

TORCH 8.5\ Square Extended U Bolts Extra Long 2.5\ wide 9/16\ Ubolt w Hardware

FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..

Check Stock

Tigeracing Tie Down Anchors+MZS Leveling Kit 1\ Rear Lift Blocks Compatible with 2015-2020 F250 350 Super Duty

Compatibility fits 2015-2020 F250 350 Super Duty, 4 Piece tie downs are for F150 rear holes,B07V35TGV9 and B07V425TTC are for front holes. 2..
Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds!Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws,make it safe and stay on all the time when driving!.
Perfect Fit & Precise Structure : Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Advanced spray-paint technology not afraid of being scratched.Fearless of the wind, dust, rain and snow..
Note: U-bolts are required for installation, U-bolts are NOT included in this kit. Some vehicles are equipped with 2" or 4" rear factory blocks. Lift height will vary based on size of existing block being replaced..
Easy installation: MZS leveling kit can be installed in about 1-2 hours, does not require special tools. A front end alignment back to factory spec is recommend after install..

Check Stock

Square U Bolt in Zinc 3/8 x 3 x 7 U Bolt Zn Industrial and Scientific Supplies U Bolts for Boat Trailer Tube Rectangular Wood and Metal Objects 4 Pieces

Common Size: the square U bolts measures about 3/8 inch in diameter, 3 inch in width and 7 inch in length, proper for 3 x 3 inch square, suitable size can meet your different fastening needs, please check the size before ordering.
Sufficient Quantity: you will receive 4 pack of square U bolts in zinc, including 4 pieces of u bolts, 4 pieces of frame plates and 8 pieces of nuts.
Enough quantity satisfy your uses and replacements.
Hard Material: the square U bolt adopts carbon steel material, and with zinc plated, sturdy and reliable, with nice rust and corrosion resistance, each bolt can withstand the weight, still perform well in rainy and wet environments.
Wide Applications: the U bolts are widely suitable for various fields, such as industry, manufacturing, maintenance, the automotive sector, clothing production, etc., ideal for fastening tubes, woods, trailer, and so on.
Tips: It is recommended to use lubricant during installing the U bolts to prevent wear and tear.
Use a manual wrench or socket ratchet when installing nuts.
Do not use high speed power tools or impact tools to tighten the nuts.

Check Stock

1SHOT Steel Stud Anchor 250 Pack

Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..

Check Stock

304 Stainless Steel Square U-Bolts Boat Trailer (1/2\ D x 3-1/16\ W x 5-5/16\ L),U Bolt Fit 3\ x 3\ Square Trailer Frame(4PCS)

U-bolt Size: 1/2" D x 3-1/16" W x 5-5/16" L, thread length: 2 1/2" inches, suitable for 3*3 square trailer frame.
Material Type: 304 stainless steel, all accessories are made of 304 stainless steel.
You Can Get: (4) U-shaped bolts, (8) flat washers, (8) lock washers, (8) hexagonal nylon inlay nuts, these are half the price of the hardware store..
Tip: It is recommended to use lubricant when installing, and use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts.
After-sales: After the purchase is not suitable, or if you encounter problems, please feel free to send us an email through Amazon, and we will solve it for you within 12 hours.

Check Stock

U-Bolt Exhaust Muffler Clamp, Stainless Steel Heavy Duty, Saddle Design with Reinforced Ribs, Universal Silencer Exhaust Clip (2.55 inch)

【Strong Stainless Steel】: The exhaust hanger is made of hard stainless steel and the saddle-type clamp makes it very durable without deforming easily. It has a professional grade galvanized surface to effectively prevent rust and corrosion. It can be used for a long time and still look like new..
【Meet Your Different Needs】: To meet your different needs, we have 4 different sizes for you to choose from: 1.88 inches, 2.12 inches, 2.36 inches, 2.55 inches. You can choose the appropriate size according to your actual needs. We recommend that you check the dimensions of the pipe carefully before you buy..
【Practical Accessories】: U-bolt exhaust clamps are widely used for sealing muffler inlet/outlet, elbow joints, pipes, and repairing exhaust systems. The excellent sealing makes it effectively prevent waste and noise leakage..
【Easy to Use】: Please be assured that it is very easy to install and can be done quickly without any soldering. In addition, it can be disassembled and reused, making it the most practical assistant in your toolbox..
【Purchase Hassle Free】: The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts. We test every item and ship it only after 100% guarantee in good condition. For technical, installation an....

Check Stock

Armored Personnel Carrier

Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
Package：Provide U bolt and 4 lug nuts are supplied.

Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..

Check Stock

PINGEUI 2 Pack 3 Inch Stainless Steel U Groove Wheel, U Groove Caster with Bracket for Sliding Gate, Rolling Gate, Inverted Track, Industrial Machines, 882 lbs Capacity

STAINLESS STEEL MATERIAL - Made of thick 304 stainless steel, the stainless steel U groove wheel is sturdy, corrosion-resistant, wear-resistant and rust-proof. They have strong hardness and strength and can be used for a long time..
HIGH-QUALITY BALL BEARINGS - The double ball bearing design allows you to easily open and close your gate. Your gate will move quietly and smoothly to reduce noise. High-hardness bolts can firmly secure the U groove wheel to ensure its normal operation..
STRONG LOAD CAPACITY - You will receive 2 packs of stainless steel groove wheels. Each wheel has a load capacity of 882 lbs. The wheel diameter is 2.6 inches (68 mm), the groove width is 0.86 inches (22 mm) and the groove depth is 3/8 inches (10 mm)..
MUTI-APPLICATIONS - These U groove casters can be widely used in various places, such as sliding gates, factory gates, inverted rails, garden gates, heavy trolleys, container racks, industrial machinery rail projects and so on..
AFTER-SALES SERVICE - We hope you are satisfied with our U groove wheel for gate, which is why we provide you with a risk-free purchase. If you have any questions or dissatisfaction with our product, please feel free to contact us. We'll get back to you within 24 hours. This product comes with a 30-day m....

Check Stock

Aoje-Link Square U-Bolts 1.97\(50mm) Inner Width M8 Thread 304 Stainless Steel Silver with Plates Nuts Flat Washers for Car/RV/Trailer Bumper, 4Pcs

✩U-Bolts Specification: U-Bolts Diameter (M6) x Overall Width x Overall Height: (5.2 x58 x 50 mm) / (1/4" x 2-1/4" x 1.96"). Groove Width: 38mm / 1-1/2". Perfectly Suitable for Round Tube Size 38mm(1-1/2"). M6 Self-locking Hex Nuts Thread Length: 28mm. With Corresponding Flat Gaskets. Surface Color: Silver..
✩Application: Round U-Bolts Designed for Securing Various Products to Round Wood and Metal Objects. It Is Widely Used In Cars, Boats, Plumbing, Other Home and Industrial Applications..
✩Steps for Usage: 1. Choose the Corresponding U-Bolts Specifications According to the Size of Pipe 2. Drill Holes in the Connection 3. Lock Nut and Flat Washer..
✩Material: High-strength SUS304, Acid and Wear Resistance, Anti-rust, Moisture-proof and Corrosion-proof. No Burr, Smooth Thread. It still performs well in the seaside, rainy and humid environments..
✩Package Content: 4 U-shaped bolts, 8 Self-locking Nuts, 8 Flat Washers, Easy to install, Uniform Force, Strong and Durable..

Check Stock