ReviewsStamped Machined

TEKTON 1/4 Inch Drive Torx Bit Socket Set, 10-Piece (T6-T30) | SHB90103

Includes 10-pc. 1/4 in. drive Torx bit sockets: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30.
S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
Star-shaped Torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out.
Large, clear die-stamped size marking is easy to read and can’t wear off.
Four detent grooves provide a secure connection with the drive tool.

Check Stock

DURATECH Super-Thin Open End Wrench Set, SAE, 8-Piece, Including 1/4\

【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 1/4"x9/32.

Check Stock

TEKTON 1/2 Inch Drive x 19 mm Hex Bit Socket | SHB23219

S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
Large, clear die-stamped size marking is easy to read and can’t wear off.
Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
Overall Length: 2.2 in., Shaft Diameter: 0.75 in., Drive End Diameter: 1.3 in., Exposed Bit Length: 0.7 in..

Check Stock

Der Erwachte Super-Thin Open End Wrench Set, SAE, 6-Piece, Including 3/8\

【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 3/8"x7/16.

Check Stock

Kamashaa Motor Radiator Compatible with 2001-2005 Chevy Silverado 2500HD 3500 HD 6.6l Duramax LB7/LLY, 4 Row Radiator Full ALuminium Radiator

Full T-6061 Aluminum Construction, 100Percent Welded By TIG.
Increased durability over the factory plastic end tank radiator.
Leading-edge Welding Craftsmanship, CE Approval. High Performance Racing Design, Improves Cooling by 35 -45Percent Temp.
An exclusive tube design that dramatically increases cooling, reinforced die-stamped tanks for added rigidity, machined-billet filler neck for better pressure control.
Engineered to last, perfect fit Assurance.

Check Stock

TEKTON 1/2 Inch Drive x T60 Torx Bit Socket | SHB24260

S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
Star-shaped Torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out.
Large, clear die-stamped size marking is easy to read and can’t wear off.
Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
Overall Length: 2.2 in., Shaft Diameter: 0.47 in., Drive End Diameter: 1 in., Exposed Bit Length: 0.7 in..

Check Stock

TEKTON 3/8 Inch Drive Long Hex Bit Socket Set, 18-Piece (1/8-3/8 in., 3-10 mm) | SHB91303

Includes 8-pc. 3/8 in. drive long inch hex bit sockets: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 in..
10-pc. 3/8 in. drive long metric hex bit sockets: 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm.
S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
Extra-long bits allow you to reach deep into especially narrow, recessed areas.
Large, clear die-stamped size marking is easy to read and can’t wear off.

Check Stock

TEKTON 1/2 Inch Drive Hex Impact Bit Socket Set, 24-Piece (1/4-3/4 in., 6-19 mm) | SIB92311

Includes 10-pc. 1/2 in. drive inch hex impact bit sockets: 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
14-pc. 1/2 in. drive metric hex impact bit sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
6-sided hexagonal tips are machined to precise tolerances for an exact fit with hex fasteners.
Two-piece design allows bit and socket to be optimized seperately, for a more durable tool than traditional one-piece designs.
High-density polyethylene case withstands common lubricants, fuels, and solvents.

Check Stock

TEKTON 3/8 Inch Drive x T60 Long Torx Bit Socket | SHB14460

S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
Star-shaped Torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out.
Extra-long bits allow you to reach deep into especially narrow, recessed areas.
Large, clear die-stamped size marking is easy to read and can’t wear off.
Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
Overall Length: 6 in., Shaft Diameter: 0.47 in., Drive End Diameter: 0.8 in., Exposed Bit Length: 4.9 in..

Check Stock

AudioQuest Tower 1.5m RCA Analog Audio Interconnect Cable

Solid Long–Grain Copper (LGC) Conductors - Solid conductors eliminate strand-interaction distortion. Evergreen's solid Long–Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen–Free High–Conductivity) copper..
Foamed–Polyethylene Insulation - Tower uses air–filled Foamed–Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low–loss and has a benign distortion profile..
Metal–Layer Noise–Dissipation System (NDS) - 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise–Dissipation System. Noise–Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane..
Asymmetrical Double–Balanced Geometry - While many single–ended cable designs use a single path for both the ground and the shield, Double–Balanced designs separate the two for cleaner, quieter performance..
Cold–Welded Gold–Plated RCA Plugs - This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability..

Check Stock

TEKTON 1/4 Inch Drive Hex, Torx, Phillips, Slotted, Square Bit Socket Set (42-Piece) | SHB90301

Includes 4-pc. 1/4 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in..
4-pc. 1/4 in. drive Phillips bit sockets: #0, #1, #2, #3.
10-pc. 1/4 in. drive inch hex bit sockets: 5/64, 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 in..
10-pc. 1/4 in. drive metric hex bit sockets: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 mm.
10-pc. 1/4 in. drive Torx bit sockets: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30.
4-pc. 1/4 in. drive square recess bit sockets: S0, S1, S2, S3.
S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
Bits tips are machined to precise tolerances for strong engagement with fastener heads.
Large, clear die-stamped size marking is easy to read and can’t wear off.
Four detent grooves provide a secure connection with the drive tool.

Check Stock