ReviewsStandard Screw

Befenybay Ball Screw SFU1605 (Diameter 16mm Pitch 5mm) Length 400mm with Metal Ball Screw Nut for CNC Machine Parts(400mm)

High service life time due to low friction.
Ball screw diameter:16mm, ball screw pitch:5mm, ball screw length:400mm(15.75 inch).
Compatible with BK12/BF12 standard end machining.
The total length is 400mm and the effective ball screw length is 335mm.
Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.

Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
Some people use them for mounting a small table to the end of PVC pipe..
The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..

Check Stock

Emoshayoga Toilet Seat Screws Hinges Bolt Expanding Rubber Top Nuts Screw Fixings Accessories

【STRONG METAL HINGE】Black Rubber (expandable ball), ABS Plastic (round cards) and Stainless Steel (screws). This screw is made from strong metal hinges and bolts, better than most plastic fixtures..
【SPECIFICATION】This lavatory seat bolt nuts manufactured to meet standard specification, which have strictly followed factory quality control..
【EASILY INSTALLATION】The rubber grommets have a threaded section so you can just push them into the holes in the top of the toilet pan and when you tighten the screw it expands and tightens itself into the hole..
【CONVENIENCE】This rubber bungs slide into the holes perfectly and when you tighten the bolts they squash up in the holes to make a good tight fit..
【VERSATILE HINGE】This toilet seat screw is very great for broken or old toilet seat hinges, and which fits for most standard toilet seats with top fix hinge..

Check Stock

100 Qty #12 Stainless Steel Countersunk Finish Washers | 304 SS Finishing Cup (BCP576)

The countersunk head screw gasket is made of pure copper, which is not easy to rot, moisture, and oxidation..
These screw washers are small in size, light in weight and easy to install and use..
This screw washer is precisely matched, and the bearing exterior of the bolt is large, and the lock is firmer..
These screw washers have standard concentricity, smoothly exterior, concentric..
Can be installed on many different types of materials. Wide range of applications..

Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

Easy to use,convenient to operate,saves effort and time in use..
Using thread insert to convert mm---inch screw hole, it is convenient and fast..
The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
Parts thread hole repair, such as injection molding machine template thread hole repair.
Imported equipment or machinery thread dam.

Check Stock

Assrutw Akatsuki Anime License Plate Frames Car Accessories for Men Women 2 Pack Universal US License Plate Frame with Fasteners

【PACKAGE】: 2 pack license plate frames for front and rear.
with all hardware-- 4 plastic screw covers, 4 screws, 4 screw washers, 4 nylon screw inserts, 1 screwdriver.
【SIZE】: 16 x 31.3 cm/ 6.3 x 12.3 inch (US standard size).
fits most standard American cars, SUVs, trucks, sedans.
【GIFT IDEA】: perfect gift choice for men, women, anime fans.
the cool akatsuki car accessories will give your car a personalized and recognizable look.
【CAUTION】: according to the laws in your state, please measure first to make sure that our license plate frame will not block out any information on the license plate.

Check Stock

Coravin Screw Caps - Pack of 6 - Accessory for Coravin Timeless Wine by the Glass Systems and Wine Savers

What's Included: Six Coravin Screw Cap accessories in one pack of 6.
Experience Wine Differently: The Coravin Aerator enhances your wine experience by immediately mixing the right amount of air with the wine as you pour.
How It Works: Coravin Screw Caps combine self-sealing silicone with a premium cap liner to create a tight seal, protecting wine for up to 3 months.
Simply open the bottle by removing the screw cap, then immediately replace it with a Coravin Screw Cap.
The Technology: Coravin's standard size screw cap fits 98% of wine bottles.
Every Coravin Timeless wine-by-the-glass system's needle is slightly off-center so that you pierce a new spot in the cork or screw cap accessory every time.
Easy to Clean: When bottle is finished, remove Coravin Screw Cap and rinse with warm, clean water.
Do not submerge in water and do not use detergent.

Check Stock

Gimbal Extension Pole, ZHIYUN 29' Extension Rod for Gimbal Stabilizer, Adjustable Selfie Stick with 1/4' Thread Compatible with DJI OM 4/Zhiyun Smooth 5 Q3 4/GoPro Vlog Pocket/Go 2 EVO Action Camera

【Gimbal Extension Pole】Design for DJI OM 4 Osmo Mobile 3 2/Zhiyun Smooth 5 4 Q3/Feiyu Sgp/WG2/G5/Insta360 GO 2/Hohem 3-axis smartphone gimbal stabilizer. NOTE: There is NO button on the gimbal extension pole to trigger your camera..
【1/4" Standard Screw Mounts With Ease】Equipped with 1/4" standard top screw and 1/4" standard bottom screw hole, you can use an extra adapter (NOT INCLUDED) to use for Action Cameras, and you can mount it on a tripod/slide(NOT INCLUDED)..
【29" Extendable Selfie Stick】Retracts to a handy 7.4in/19cm, extends to the lengthy 29 in/74cm..
【0.34lb Ultra-Lightweight】Aviation aluminum alloy material, durable and lightweight, easy to carry around..
【Non-slip Rubber Handgrip】 Wrapped in a non-slip rubber design, feels more comfortable..

Check Stock

Gmconn Mini Tactical Green Laser Sights Ultra Low Profile Green Dot Laser Gun Sight for Pistols, Fit Picatinny Rail, USB Rechargeable, Lightweight (Green Laser)

✅【ONLY ONE Screw + 21MM Width Rail】There are Three alternative screw holes on the gun laser sight, choose one for your preference and use the ONLY ONE SCREW to install the sight in a perfect location on your 21MM width standard rail with screw slot. Kindly be noted: If the clear space between the rail screw slot and the trigger guard is at least 36 MM (1.45 inch), it will fit..
✅【Class IIIA, 003c5mW】Bright and precision green laser sight, Safe beam intensity/wavelength: 003c5mW peak, 532nm, Class IIIA. Highly visible green laser in any environments which can reach up to 50-100 ft. during the day and up to 600-1000 ft. at night..
✅【User Friendly】Easy ambidextrous activation for left and right-handed users. The Laser sight is made of fiber-reinforced nylon material, which offers ultra compact and lightweight with Only 1.59oz (battery included)..
✅【Rechargeable Battery】The Green Laser sight for pistol is powered by a built-in rechargeable battery, which is charged with an USB-C Cable. The green beam laser can be running to 5 hours..
✅【Powerful & Precise】The low profile laser sight compatible with standard Picatinny rail which is designed for Pistols, Handguns, Glock, PX4,SIG and etc. Adjustable windage and elevation helps you b....

Check Stock

Quick Release L Shape Bracket Universal Vertical QR Plate Video Shooting DSLR Camera L Bracket with 1/4 Inch Screw Arca Swiss Compatible with DJI Osmo Ronin Zhiyun Canon Nikon Sony

【Wide Compatibility】：There Has Arca-swiss Standard On Both Sides Of QR Plate , Compatibility For All Arca-swiss Standard Devices. With 1/4 Screw, It Supports Installation Of Most Camera, Such As Canon EOS 6D/7D/600D/700D Sony a7riii/a7rii/A7S/a6000 Nikon D750/D3400/D5600/D7200..
【Material】：Durable Aluminum Alloy Construction, CNC Precision Machining,High Quality, Solid Structure, Sturdy And Versatile..
【Non-slip Design】：With 4 Pieces Of Antiskid Rubber Pad On The Plate To Increase Stability And Protect The Camera Surface From Scratch And Abrasion..
【Vertical & Horizontal Shooting】：Support Horizontal And Vertical Shooting Angles For Accurate Shooting Effect..
【1/4" Screw Holes】：With 9 Screw Holes , You Can Replace The Screw Hole For Installation According To Use Requirements Or Install Other Auxiliary Shooting Equipment..

Check Stock

Supply Giant 3942x10 Flexible Pvc Pipe Cap with Stainless Steel Clamps, 2 Inch Black (pack of 10), 2'

This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
Some people use them for mounting a small table to the end of PVC pipe..
The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..

Check Stock