ReviewsStandard Sm Coupler

Master Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4

  • ATTENTION: If you order two 4-packs they will NOT necessarily be keyed the same. To ensure you get two 4-packs keyed alike, you must order the 8-pack..
  • APPLICATION: Ideal for outdoor applications when needing many locks that utilize ONLY one key. The 37 lock works on 1-7/8 & 2 inch couplers & on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. TO FIT COUPLER LATCH: Remove the shackle sleeve. Shackle fits standard opening of 9/32" (7mm). Note that non-rigid shackle has enough play to fit virtually all coupler latches less than 7/8 wide..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
  • SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check Stock

ZZHXSM Plastic 10 Pcs Standard Couplers Cake Decorating Pipe Tip Couplers for Icing Nozzles, White

  • Packing: 10 cake decoration couplers, enough to meet different purposes, you can change the test tube of similar size without emptying the contents in the decoration bag.
  • Standard fittings: These white fittings are 3 cm / 1.2 inches long and have a base diameter of 2.5 cm / 1 inch, suitable for standard size icing nozzles.
  • Available range: The standard coupler is suitable for all decorative bags and standard size tips, which can help you replace pipe tips without unnecessary waste.
  • Simple and easy to use: cut a small hole in the corner of the bag, insert the plastic coupler, and then fix the suction head and screws on the ring. After completion, remove the tip and coupler and clean them.
  • Durable and practical: The tube head connector is made of high-quality plastic and has a sturdy structure that allows you to decorate cakes and biscuits quickly and easily.
Check Stock

JK MIC-J Lapel Microphone Lavalier Microphone Headworn Microphone Clips Plastic Version X 5PCS

  • Stand Adapter for SM62, SM63, SM81, VP64, AMS26, KSM141, KSM137.
  • Securely mounts the Shure models KSM137, KSM141, SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, MX412, MX418, MX412S, MX418S, MX412SE, and the MX418SE microphones to standard microphone stands.
Check Stock

Wilton Navy Blue and Gold Piping Tips and Cake Decorating Supplies Set 17-Piece

  • The beautiful gold and navy blue design makes this a great cake decorating tip starter or start-over set for any baker you know.
  • Create swirls, stars, swags, flowers and more with this assortment of gold tips.
  • petal tip 104 and leaf tip 352, 8 disposable decorating bags, 1 standard Coupler and....
  • Material: gold-plated stainless steel tips.
Check Stock

Cat6 Keystone Jack, 20Pack Female to Female RJ45 Couplers Compatible with Cat7/6/6e/5/5e Ethernet Devices -White

  • FITS ALL STANDARD KEYSTONE WALL-PLATES:Cat6 RJ45 Keystone jack in-line coupler installs in patch panels, surface mount boxes, or keystone wall plates (face plates) with standard keystone ports.
  • 8P8C female to female keystone jack cat6 used with Cat 6/RJ45, Cat5, CAT5e Ethernet networking cables, Compatible with standard 4-wire RJ11 telephone/fax line, 8P8C Ethernet network jack insert.
  • Female-to-female CAT6 keystone jack RJ45 easily joins two RJ45, CAT5E or CAT6 wiring together, then run your own network throughout the home.
  • CAT6 Keystone inline Coupler is great for voice, home networking, home office, audio, video and more DIY project.
  • RJ45 keystone jack inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568-C.2 standard,.
Check Stock

Blue Tongues Don't Lie

  • EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer (CURT channels #48610 and #48650 recommended, sold separately).
  • PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 15,000 lbs. gross trailer weight and 2,250 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Husky 87084 2\ 5,000 lbs. Coupler Repair Kit , Grey

  • EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer (CURT channels #48610 and #48650 recommended, sold separately).
  • SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing.
  • PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-inch diameter trailer ball.
  • HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 7,000 lbs. gross trailer weight and 1,050 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.
Check Stock

Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp

  • ★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals..
  • ★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider..
  • ★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on..
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose..
  • ★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler..
Check Stock

Shocker Gooseneck Surge Air Hitch & Shift Lock Coupler for 2-5/16\ Ball, 3-15/16\ Square Top Crank 30K Coupler

  • ...wing on rough roads or concrete highways. Built in Airbag: This hitch directs the tow resistance through an airbag, producing a smooth ride..
  • 30,000 lbs Tow & 7,000 lbs tongue weight: Available with 30k dual latching Shift Lock gooseneck coupler. Fits 2-5/16? gooseneck hitch balls: & has 3 height adjustment holes. (Standard coupler extends 3 inches forward from your factory coupler or choose 9 inch offset extension coupler for short bed pickups).
  • Air Ride Technology: Protects your truck, gooseneck trailer and the contents with a smoother, safer tow. Heavy loads, just add air. The cure for choppy, bouncy, buckled, rough & busted up roads. No more booms, bangs and jerks when towing with your gooseneck..
  • Includes complete Shocker Gooseneck Surge air hitch with built in airbag, replacement inner tube stem & 30,000 lb Shift Lock gooseneck coupler for 2-5/16" ball (Make SURE You Pick Correct Inner Stem Size & Pin Type) Made in the USA by Shocker Hitch Arthur, North Dakota. (If you have a short bed truck, check out our Shocker goose air with 9 inch extension coupler).
Check Stock

Fulton 34300 0301 Trailer Coupler, Class III 5000 lbs. Rating

  • EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer (CURT channels #48610 and #48650 recommended, sold separately).
  • PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 14,000 lbs. gross trailer weight and 2,100 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.
Check Stock