ReviewsStarting Shaft

Lucas Oil LUC10153 Assembly Lube - 8 oz. (6)

  • Adheres to component surfaces to prevent scuffing and galling during initial start-up.
  • High quality formulation meets OEM performance specs for engine assembly lubricants.
  • Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine.
  • Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.
Check Stock

Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz. , Red

  • Adheres to component surfaces to prevent scuffing and galling during initial start-up.
  • High quality formulation meets OEM performance specs for engine assembly lubricants.
  • Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine.
  • Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.
Check Stock

Longoni Abrado Ultra Fine Sanding Sheets for Smoothing Burnishing Billiard Pool Cue Shafts 3 Sanding Grades 4 Complete Sets

  • Longoni Abrado: the Micro-abrasive set for cleaning, smoothing and burnishing wooden pool cue shafts. This set has been developed to sand your shaft for a smooth finish without damaging it. The set includes 4 green, 4 yellow and 4 blue sheets (3 sanding grades, 12 pcs total).
  • The plastic material holding the abrasive allows you to re-wash sheets and re-use several times (dry them before sliding back into the package).
  • Slightly sand your shaft starting with the green paper first, then yellow and blue for final polish.
  • Use Longoni cue wax for a pro final touch.
  • Sheet size: 3 1/8 ” x 2” (80 x 51 mm). Fits in your wallet, pocket or cue case. Made in Italy.
Check Stock

Goulds WE1012H Submersible Effluent Pump, 1 HP, Single Phase, 230 V, 12.5 Max Amps

  • Cast iron volute type for maximum efficiency.
  • Corrosion-resistant, stainless steel shaft with threaded design.
  • Designed for continuous operation when fully submerged.
  • Capacitor start motor for maximum starting torque.
Check Stock

PRM 81950 Ultra Slick Engine Assembly Lube 4 oz 2 Pack

  • Adheres to component surfaces to prevent scuffing and galling during initial start-up.
  • High quality formulation meets OEM performance specs for engine assembly lubricants.
  • Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine.
  • Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.
Check Stock

Little Giant 6-CIM-R 115-Volt, 1/3 HP, 2750 GPH Manual Submersible Sump/Utility Pump with 10-Ft. Cord, Blue, 506271

  • BUILT TO LAST: continuous duty motor with thermal overload protection, epoxy-coated cast iron housing, upper and lower bearings, corrosion resistant steel motor shaft, and non-clog impeller help ensure a long pump life.
  • CONTINUOUS DUTY MOTOR: shaded pole 1/3HP motor with thermal overload protection.
  • MULTIPLE FITTINGS: 1-1/2-inch FNPT discharge.
  • 1-1/4-Inch FNPT adapter and 3/4-inch garden hose adapter included.
  • MANUAL PUMP: ideal for sump pump systems with a separate switch, emergency water removal applications or water transfer applications.
  • 1-1/2-inch FNPT discharge with adapters included.
Check Stock

VEVOR Air Compressor Electric Motor, 5 HP SPL 3450 RPM, 208-230 Volt 3.1 KW Single Phase, 56 Frame 5/8" Keyed Shaft 60 Hz, Commercial-Duty CCW Rotation, 1.88" Shaft Length NEMA for Air Compressors

  • ...overheating. The attached steel bracket also offers excellent stability. Two capacitors and high-quality ball bearings ensure long service life..
  • Overload Thermal Protector: The heavy-duty electric motor adopts a manual reset knob against high-temperature overload. Reduced starting amperage design ensures the reduced voltage starting at a rated load. Insulation class-F, ENC-IP23, Ambient temperature-104℉ / 40℃, Duty-CONT, Pole-2..
  • Heat Dissipation Holes: The air compressor motor has multiple heat dissipation strips for heat dissipation. It can also guard chips and objects against dropping in the motor and causing accidents..
  • Designed for Air Compressors: The open drip-proof motor is better used in a relatively clean and dry environment. Specifically designed for air compressor duty uses. Please purchase a motor according to the specific needs of your compressors..
Check Stock

Husqvarna 524LK 4-Stroke Straight Shaft Line Trimmer

  • Air purge removes air from carburetor and fuel system for easy starting..
  • The engine and starter have been designed so the machine starts quickly with minimum effort.
  • No need for mixing gas with oil when refueling, 4-stroke engine runs on pure gasoline..
  • Tooless coupler separates shaft for easy transport and storage.
  • Click on attachments for easy tool change.
Check Stock

Ryobi RY254BC 25cc 2-Cycle Full Crank Gas Brush Cutter NIB

  • Attachment capable: accepts universal brand fit attachments.
  • Zip start carburetor for easier starting.
  • Ideal for thinker weeds and brush. 8 in. tri-arc reversible steel blade.
  • Straight shaft for extended reach around and under obstacles.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • Automatic Submersible Sump Pump: with integral diaphragm switch activates when Water reaches 7 to 10 inches and shuts off when Water drops down between 1 and 4 inches.
  • Built To Last: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • Continuous Duty Motor: 1/3 HP shaded pole Motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • Applications: designed for sump Pump systems and general Water transfer application.
  • must sit in Water to activate the switch.
Check Stock

Little Giant 9S-SMPXRT-K 4/10 HP, 115-Volt, 6000 GPH Pre-Packaged Simplex Sewage Basin/Pump System - Assembly Required, Black/Blue, 509074

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock