LiftMaster Garage Door Opener 41A5483-4C Receiver Logic Board
- LiftMaster Door Opener Receiver Logic Board replacement for board number 41A5483-4C..
- Match the 41Axxxx-xx part number found on the control panel of your garage door opener..
ReviewsStd Control Panel Board
LiftMaster Garage Door Opener 41A5483-4C Receiver Logic Board by LiftMaster
- LiftMaster Door Opener Receiver Logic Board replacement for board number 41A5483-4C..
- Match the 41Axxxx-xx part number found on the control panel of your garage door opener..
MUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K
- Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
- Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V /.
- Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
- Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
MUSETEX ATX PC Case Mid-Tower with 6pcs 120mm ARGB Fans, Computer Gaming Case with Tempered Glass Side & Front Panels, Metal Honeycomb Mesh, USB3.0, S6-B
- 6 ARGB Fans - The MUSETEX S6-B PC Case comes pre-installed with 6 ARGB fans, more fans than most pc cases, providing better cooling performance and cooler colors. The more powerful ARGB comes in 16.8M colours and is motherboard SYNC with the MUSETEX dedicated ARGB control board pre-installed in the case. More color and fun can be to play with than normal RGB!.
- Brilliant Customizable Lighting - Addressable ARGB LEDs controlled with 2 methods. 1.LED Button Control: 19 lighting modes for LED button on the I/O panel.
- 2.Motherboard Control: Only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized. (Note: 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.).
- Well-engineered Airflow - MUSETEX Gaming PC Case S6-B are pre-installed 6 pcs 120mm ARGB fans to provide lighting, utilizing anti-vortex vanes to ensure proper airflow inside the case to achieve better cooling performance than ordinary PC case..
- Show Off Your Lights - S6-B with stylish tempered glass design showcases your PC components and ARGB lighting. The side and front high transparent glass will help you build the coolest computer chassis..
- Powerful I/O panel - This atx computer case has 1 US....
Chamberlain 41A5021-5I Logic Board Genuine Original Equipment Manufacturer OEM Part
- LiftMaster Opener Receiver Logic Board replacement for board numbers 41A5021-5E, 41A5021-5F.
- Match the 41Axxxx-xx part number found on the control panel of your garage door opener..
Aquascape 45038 Pond Pump Smart Control Receiver with Conversion Plug, Black
- Control Adjustable Flow Pumps using the Aquascape Smart Control APP.
- Allows for a variety of wireless control functions, including flow adjustment, customized scheduling and Alexa voice controls.
- Integrated control panel provides on-board power and flow control.
- Conversion plug included to upgrade existing Aquascape Adjustable Flow Pump to smart controls.
- Compatible with AquaSurge, AquaForce and SLD 4000-7000 Adjustable Flow Pond Pumps. Note: not compatible with the SLD 5000-9000 Pond Pump..
Bedside Table,Glass Nightstand Table (20x20x19)
- ✅【Auto Sensor 3-Color Light】Two light modes, auto-sensing mode: auto-on when approaching, auto-off when leaving.
- manual control: the light can be turned on and off by a button.
- brightness can be adjusted, 3 colors: white/blue/yellow.
- ✅【USB charging port】 We have designed two USB charging ports for the lighting control panel. The more user-friendly design makes your life more comfortable..
- ✅【Simple Assembly】The night stands for bedrooms is flat packed, please read the installation instructions provided by us before installation, follow the installation instructions after receiving the product..
- ✅【Multi-purpose design】Simple and stylish LED bedside table, suitable for most decoration styles, can be used as a end table, bedside table is suitable for bedroom, living room, office, etc..
- ✅【High-quality board】 This LED bedside table is made of high-quality white wood grain board, the high-gloss wood board material is easier to clean, durable and good-looking style to better match your home life.
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
- LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
- 2004 LCD smart controller for 3D printer，Supports for RAMPS 1.4 control board.
- This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
- A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
Middleton Row, No Assembly Required, Floating nightstand, Solid Premium Bamboo Wood - Walnut
- ✅【Auto Sensor 3-Color Light】Two light modes, auto-sensing mode: auto-on when approaching, auto-off when leaving.
- manual control: the light can be turned on and off by a button.
- brightness can be adjusted, 3 colors: white/blue/yellow.
- ✅【2 USB charging port& Wireless Charging】 We have designed two USB charging ports for the lighting control panel. Connect the power cord, place the phone in the wireless charging area, you could easily charging.The more user-friendly design makes your life more comfortable..
- ✅【Multi-purpose design】Simple and stylish LED bedside table, suitable for most decoration styles, can be used as a end table, bedside table is suitable for bedroom, living room, office, etc..
- ✅【2 Sliding Drawers and Open Shelf Design】This nightstand is the made of 2-drawer and high quality MDF board, provides enough space for you to organize your stuff, gives you a neat space..
- ✅【High-quality board】 This LED bedside table is made of high-quality board, the high-gloss wood board material is easier to clean, durable and good-looking style to better match your home life.
Electric Guitar Accessories, Practical Bass Control Plate Easy Installation Convenient Control Plate Assembly with Mounting Screws for Type Bass
- Made of sturdy thick metal with chrome‑plated control board, durable and rust‑proof.
- The kit comes with mounting screws for easy installation and very practically.
- Very suitable for type bass, is a very good accessory, can meet your demand.
- Small size, easy to carry and store, convenient to use and with good performance.
- The guitar control panel includes small knobs, volume and tone board controls..
Chamberlain 41A5483-4 Garage Door Opener Logic Board Genuine Original Equipment Manufacturer (OEM) Part
- LiftMaster Door Opener Receiver Logic Board replacement for board number 41A5483-4C..
- Match the 41Axxxx-xx part number found on the control panel of your garage door opener..