ReviewsSteadicam Stabilizer

No Show Mesh Machine Embroidery Stabilizer Backing 12' x 50 Yd/roll - Seneme Light Weight 1.8 oz Poly Mesh Cut Away Stabilizer for Machine Embroidery, Hand Sewing, Hoop & Stitch

  • √High Quality Stabilizer: This no show mesh cutaway stabilizer is 100% nylon spun polymesh which is a non-toxic material. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. The strong material helps the stabilizer withstand repeated washing and wearing..
  • √100% Safe on Skin: The stabilizer sheet is acid-free and lead-free.
  • the soft spun polymesh material protects your skin from rubbing on the rough thread parts at the back of an embroidery design. No more irritable and uncomfortable feeling when wearing embroidered shirt!.
  • √Easy to Use: Cut the embroidery stabilizer into a size as you want, hoop it together with the fabric, then stitch.
  • cut away and clean the stabilizer around the stitches after finishing your project..
  • √Versatile Support: Using a stabilizer for machine embroidery projects delivers flawless results. It works best with light-colored and soft cloth and those with natural fibers. It is perfect for chest logos, infant items, pique knits, T Shirts, Polo shirts, micro fiber apparel, silk and satin and so much more..
  • √Embroidery Stabilizer Specification: 12" x 50 Yard/roll - type packaging which makes it ....
Check Stock

Alvin's Cables 3 Pin Male Steadicam Zephyr to 8 Pin Female Power Cable for ARRI Alexa Mini

  • From Alexa MINI 8 Pin to 3 Pin Steadicam Zephyr, 12 Volts. (About the detail, please contact me)..
  • Cable Length: 50cm (about 15 inches ) in stock. We can customize cables with other length, please send a message to us if you need..
  • Plug B: Straight 0B 3 pin male connector..
  • Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once..
Check Stock

Cobra Archery Double Joint Stabilizer Quick Disconnect

  • Stabilizer quick disconnect is supper handy for removing stabilizers so they can travel in bow cases, etc..
  • To use Cobra's Double Joint as a disconnect, simply turn the stabilizer 1-1/2 turns, then slide the connector and stabilizer out..
  • As a jacknife knuckle, turn the stabilizer 1-1/2 turns, then swivel the stabilizer 90 degrees and tighten..
  • Connector housing comes with brass connector and bolt..
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 15" x 25 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 12" x 50 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

Superpunch Wash-Away Water Soluble Stabilizer for Embroidery - 9 inch x 10 Yard Roll, Fabric Stabilizer, Embroidery Backing & Cut Away Stabilizers - SuperStable Machine & Hand Sewing - Made in USA

  • MADE IN USA WASH AWAY STABILIZER: This USA-origin cut-away embroidery stabilizer dissolves completely when immersed in cold or warm water. Our water-soluble embroidery topping is made in the USA & a great choice for topping. This American-made product is best used on washable fabric and high-pile fabric such as terry cloth, towels, fleece, and other fluffy materials that require the complete removal of the stabilizer..
  • FABRIC STABILIZER SPECS: The thickness of this embroidery paper dissolve is 20 microns & the size is 9 inches wide & 10 yards per roll. (a minimum of 9 inches wide/ you may even receive up to 9.75"). Ideal to leave your stitches on top of your garment. No, itching worries even if you used our wash-away topping stabilizer on your skin touch. It can also be used on top of a high-profile fabric to hold down its nap, or pile. Very popular on towels and polar, sweaters, fleece & other soft knits..
  • EASY TO USE: Hoop the wash-away (water soluble) embroidery stabilizer together with fabric, then stitch. After finishing your project, just spray the embroidery design with water, and the water-soluble stabilizer will disappear leaving nothin....
Check Stock

New brothread Fusible Iron on No Show Mesh Machine Embroidery Stabilizer Backing 12" x 25 Yd roll - Light Weight 1.8 oz - 3 Options - Tear Away/Cut Away/No Show Mesh

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

Steadicam Volt Electronic Handheld Gimbal Stabilizer for All IPhone XS, XS Max & XR, All Samsung S9/S9+ & GoPro Hero

  • Create beautiful and stable video using Your iphone, Android, other Smartphones and GoPro Hero cameras.
  • Lightweight and folding design enable easy storage for vacations and travel.
  • Haptic Control utilizes Simulated Inertia dual operating modes for beginners and Experienced users gives you the feeling of a large Steadicam.
  • Fits phone sizes with or without case from 100 250G in weight and 58 to 85 millimeter wide.
  • Also works with GoPro Hero 3, 4, 5, 6 and the new Hero 7.
  • Continues to work in manual mode even long after your batteries are depleted.
Check Stock

Southland Archery Supply SAS Carbon X Hunting Pro Bow Stabilizer for Compound Bows with Dampener and Weights Ultra Lightweight High Modual with Matt Finish - 6in

  • Ultra lightweight High Modual Carbon Stabilizer with a matt finish.
  • The dampener absorbs shock and vibration from the bow keeping it quiet for hunting.
  • Stackable weights are included, 2Oz x 2, archers are able to customize their own stabilizer weight set up to find the right balance of the bow while....
  • Able to mount as the main front stabilizer or rear/side stabilizer.
  • Carbon stabilizer lenght 6", with dampener and weights the overall lenght is 9".
  • Carbon stabilizer lenght 8", with dampener and weights the overall....
Check Stock

Sulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity，2 Pcs

  • 【CREATE GREATER STABILITY】: Use the Dumble RV Slide Out Stabilizers for RV Pop Out Supports, 2 Piece Set to help alleviate tension and to increase stability in your travel trailer, RV, and camper slide out rooms.
  • Protects slide out mechanism, provides support to slide outs when extended..
  • 【BUILT TO LAST】: Constructed of heavy duty steel, these RV trailer stabilizer jacks provide maximum strength and durability.
  • Each camper slide out stabilizer is finished with a zinc powder-coating for longevity and resistance to rust and corrosion.
  • Folding handle allows you to store your trailer slide out supports in small compartments with your other RV accessories.
  • 【FITS YOUR TRAVEL TRAILER STABILIZER BARS】: Universal RV stabilizer jacks for travel trailer slide out stabilizer features 5-inch (12.7 cm) circular base and a 5.1 by 3-inch (13 by 7.6 cm) u-channel bracket faceplate for secure positioning of your RV stabilizer bars.
  • The stabilizer jacks fits 19" ~47" Inch RV Slide Out Supports. Package includes (2) camper slide out stabilizers travel trailer leveling jacks to add to your camper accessories..
  • 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slide out r....
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 10 x12 - 100 Precut Sheets - Light Weight 1.8 oz - Fits 5x7 Hoops

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional....
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits....
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the....
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weight tearaway stabilizer....
  • ▶SAFE MATERIAL: It is made of 100% embossed nylon which is acid free and lead-free, safe and extremely soft to use it on your skin-touch clothes....
Check Stock