ReviewsSteel Abrasive

JET JWDS-1020, 10-Inch Benchtop Drum Sander, 1HP, 1Ph 115V (723510)

CONSISTENT QUALITY: Heavy-duty die-cast aluminum and steel body provides rigidity..
OPTIMAL FEED RATES: Infinitely-variable speed control allows the user to choose the perfect feed rate..
FAST ABRASIVE CHANGES: Toolless abrasive take-up fasteners make changes quick and easy..
PROTECTION FROM HEAT: Extruded aluminum drum is designed to dissipate heat and protect wood from heat-damage..
SOLID BOARD SUPPORT: Precision-flattened reinforced steel conveyor bed supports the boards passing under the sanding drum..

Check Stock

uxcell 3.15-Inch Diamond Grinding Wheels Resin Bonded Flat Abrasive Wheel for Carbide Metal 320 Grits 75%

WIDE USING RANGE - Resin bond synthetic diamond cup grinding wheel is mainly used for surface grinding and external grinding..
STRONG STABILITY - Great tool for grinding due to high hardness, high compressive strength and good wear resistance of diamond abrasives..
LONG DURABILITY - Not only high efficiency and high precision, but also good roughness, less abrasive consumption and durable for use..
COMPOSITION - Diamond grinding wheel is made of three parts, abrasive grain is uniform, so it has high grinding precision..
USE APPLICATION - Widely used in cemented carbide, tungsten steel, high speed steel, alloy steel, glass, ceramics, etc..

Check Stock

uxcell 4-Inch Flaring Cup Diamond Grinding Wheels Resin Bonded Abrasive Wheel for Carbide Metal 600 Grits 75%

WIDE USING RANGE - Resin bond synthetic diamond cup grinding wheel is mainly used for surface grinding and external grinding..
STRONG STABILITY - Great tool for grinding due to high hardness, high compressive strength and good wear resistance of diamond abrasives..
LONG DURABILITY - Not only high efficiency and high precision, but also good roughness, less abrasive consumption and durable for use..
COMPOSITION - Diamond grinding wheel is made of three parts, abrasive grain is uniform, so it has high grinding precision..
USE APPLICATION - Widely used in cemented carbide, tungsten steel, high speed steel, alloy steel, glass, ceramics, etc..

Check Stock

Disston E0104578 1-1/4-Inch RemGrit Carbide Grit Arbored Hole Saws 32mm

Cutting edge of tungsten carbide particles bonded to alloy steel back.
High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.

Check Stock

60 Pack Abrasive Wheels, Rocaris 1“ Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\ Shank，Polishing bits

【Abrasive Buffing Wheel Set】1“ abrasive wheel with 1/8" silver shank and 6 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, White 1000 Grit.
【Size】Shanks are 1/8 inch, buffing wheels are 1 inch in diameter abrasive wheel.
【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

Check Stock

Walter 06A452 Enduro-Flex Turbo Abrasive Flap Disc [Pack of 10] - 36/60 Grit, 5 in. Grinding Disc with Threaded Arbor Hole. Abrasive Grinding Supplies

Flap Disc: abrasive grinding disc can be used to efficiently remove material and consumes less time in the finishing process.
Applications: surface conditioning disc helps in blending welds, breaking edges and abrasive grinding. This flat disc is also ideal for deburring.
Metal Grinding Disc: grinder disc uses exclusive Cyclone Technology for better performance, offering maximum grinding ability and solid edge stability. Abrasive disc works perfectly on steel and stainless steel.
Grinding Disc: featuring patented Turbofan Cooling design at the backing, this grinding disc allows air to cool the temperature of work pieces and reduces the heat transfer to the surface, thus increasing the lifespan of product.
Specifications: surface finishing disc measures 5 in. in diameter and is rated for grinding tool with maximum rotational speed of 12200 RPM. The diameter of the arbor hole is 5/8-11 in..

Check Stock

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

Check Stock

Rustark 8 Pcs Wire Brush Drill Attachments Kit 1/4 Inch Shank6 Piece Brass Coated Bristles and 2 Piece 80 Grit Abrasive Flap Wheel for Removing Rust Paint Polishing

【High-value Assorted Kit】The tool set contains 8 piece polishing tool, including 3"（75mm）Wire wheel, 2"(50mm) Wire wheel, 0.63"(16mm) Pointed Steel Wire Brush, 1"(25mm) Wire Brush, 2.5"(65mm) Wire Cups Brush, 2"(50mm) Wire Cups Brush, 50*25*6mm and 80*25*6mm 80 grit Abrasive flap wheel. All of them have mounted 1/4" Hex Shank..
【Wire Brush Wheel Cup Drill Attachment Set】Made of high-quality steel and brass plated.Premium Wire Construction, Wear Resistant, not easy scattered. The shank are durable and solid, not easy to break when using. Long service time, high working efficient..
【80 Grit Abrasive Flap Wheel】Made of Silicon Carbide Abrasive and Emery cloth, Sand Evenly Distributed, NOT easy fall out. Resin bonding the abrasive together, not easy scattered in High Speed Rotation. T-shape design, durable shank, long service time..
【Fit Almost of Drill】1/4" hank fits almost Types of drills and die grinders. Standard shank, perfect tool for removing rust paint and and weld spatter, polishing surface roughening, stripping paint from surfaces like wood or metal. Suitabl....

Check Stock

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

Check Stock

50 Pack Flap Discs 40 Grit 4.5" x 7/8" Sanding Wheels

4.5 inch diameter, 7/8 inch arbor (50 per order).
40 grit long lasting zirconium oxide abrasive for steel and most other metals.
Type 29 (depressed center with angled abrasive surface.
MPA-Hannover and EN 12413 quality certifications.

Check Stock

SI FANG 10Pcs 4''x5/8'' Premium High Density Calcined Aluminum Oxide Flap Disc 60 Grit …

Premium high density calcined aluminum is characterized by hard-wearing,long life. The type 27 Abrasive grinding wheels are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
Designed for grinding, blending, sanding and finishing on a wide range of material. Especially suitable for stainless steel also great for mild steel. Flap discs sanding wheel are used to grind rough workpiece surfaces, fast grinding, such as valve castings, angle irons, steel plates, welds, weld scars, rust removal, deburring, etc..
Size:100mm x 16mm ,For use on an Angle Grinder.
Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. SI FANG 80 Grit grinder grinding discs have long-lasting use..
Ideal for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc..

Check Stock